Used Doosan Lathe - Cycle-Controlled for sale (51,291)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 160545, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, workpiece weight (max.): 2,000 kg, spindle motor power: 28 W, overall weight: 6,900 kg, spindle diameter: 115 mm, distance between centers: 3,000 mm, Machine had been very little used and it is standing completely out of production for sme years. It is equipped with SAUTER 05.320.020, 3-jaw chuck (dia. 315 mm), etc. Todpfxez D Tbqj Amrsc

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Tjdpfxsgyy I Ae Amroc Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: excellent (used), Year of construction: 2002, Seiger SLZ400E cycle lathe with Heidenhain Manual-plus control Tedpfx Amszttaherjc Turning length: 1000 mm Swinging diameter over bed: 410 mm Swinging diameter over cross slide: 200 mm Bed width: 330 mm Tailstock spindle diameter: 65 mm

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Tsdpfx Aozwbyqsmroc Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. Todpow Rkt Ijfx Amrec total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle lathe with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height 350 mm Center distance 4000 mm Swinging diameter over bed 690 mm Swinging diameter over cross slide approx. 420 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions + chip conveyor L x W x H 7350 x 2450 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 fixed steady rest with rollers, internal diameter approx. 380 mm • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Tjdpfx Ajzfqdnjmroc

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Todpfx Aovzln Rjmrjc engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm Tedpfou Ix Nrjx Amrec turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Tedpeyh Hg Nofx Amrjc Machine is powered up and available for inspection

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Todpfx Aszwbx Temroc Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 1999, functionality: unexamined, machine/vehicle number: 252499, type of input current: three-phase, Cycle-controlled lathe, Kern model, status: in working order, year of manufacture 1999, control system: Heidenhain. Tjdpfx Aoz A Ui Homrjc Machine no. 252499, connection: 3 x 380 V, 50 Hz, rated current 30 A, control voltage 24 V. Equipment: protective enclosure with viewing windows, three-jaw chuck, Multifix quick-change tool holder, tailstock, coolant supply, handwheels for the cross slide and longitudinal slide. Location: Homburg (Saar), Germany. Inspection by appointment. Price on request, net plus VAT, ex works; disassembly and loading subject to agreement. All information is subject to change without notice.

Condition: good (used), Year of construction: 2019, functionality: fully functional, technical specifications will follow shortly. Todpoz Hmz Ajfx Amrec

Condition: repair required (used), Year of construction: 1992, Weisser Heilbronn HEKTOR – Cycle-controlled CNC lathe - Bosch CC220 control system (requires repair) Tsdpsz Az Snefx Amroc - Includes tools and accessories - Includes operating manual and technical documentation - Year of manufacture: 1992 Technical data: - Distance between centers: 2000 mm - Center height: 300 mm - Swing over bed: 600 mm - Spindle bore Ø: 80 mm - Tailstock spindle taper: MK5 - Bed width: 430 mm - Operating voltage: 400 V - Dimensions (W x H x D): approx. 4700 x 2300 x 2100 mm - Weight: approx. 8000 kg

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: 322379, Cycle-controlled lathe Kern CD 480, year of manufacture 1997, control system Heidenhain MANUALplus. Machine no. 322379. Equipment: Protective enclosure with viewing windows, tailstock with rotating center, Multifix quick-change tool holder, coolant supply, coolant unit, handwheels for the cross slide and longitudinal slide. Tsdpfsz A Ui Tsx Amrsc Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 1999, centre height 255 mm centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm Tedpjqzm Ngefx Amroc quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ Tedpfx Amozvq Dpjroc --> Jaw pitch: 1/16" × 90°

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. Tsdpfxezwbxys Amrsc The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (max.): 4,000 rpm, Control system: Siemens 828 D Drive spindle Speed: 4,000 rpm Power: 9 kW Maximum torque: 110 Nm Chuck diameter: 210 mm Spindle bore: 53 mm Spindle nose: A2-5'' Working area Distance between centers: 1,000 mm Center height: 240 mm Swing over bed: 470 mm Swing over compound slide: 200 mm Swing over cross slide: 430 mm Z-axis travel: 1,065 mm X-axis travel: 220 mm Tool system Todpfx Aezrghvomrsc Turret: PARAT 4-position turret head RD 2 Tailstock Technology: Follow-type Centering point: MK-4 (rotating) Steady rest Technology: Traveling Diameter range: 12 mm - 50 mm Equipment Chip management: Chip tray Coolant supply: Coolant pump, 7 bar Additional feature: Adapter plate PARAT RD-2 with internal cooling Chuck: SMW wedge-type chuck (D = 210 mm) Jaw set: 1 set of hardened jaws Footprint (L x W): 2.91 m x 1.24 m

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm control Fanuc Series 32i-Model A Tedpfszrzw Sox Amrjc Turning diameter: 280 mm Turning length: 600 mm

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 500 mm Tsdpfx Amozu Ndljroc turning dia. over face-slide: 340 mm turning length: - mm centre distance: 1500 mm swing diameter: 500 mm centre height: 250 mm control: Heidehain Plus spindle bore: 80 mm range of revolution per miute: 20 - 2400 U/min total power requirement: 11 kW weight of the machine ca.: 0,25 t dimension machine approx.LxWxH: 3,2 x 1,7 x 1,8 m

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 * Type: Conventional lathe * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Tedpez Aitpsfx Amrec Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 U/min feeds - cross 0,001 - 1000 mm/U feeds - longitudinal 0,001 - 2000 mm/U Tjdpfszzwi Nex Amroc rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t Additional information * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2, with several inserts * 3-jaw-chuck RÖHM ZS 200 * Roller guide for easier movement of the tailstock * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Tedpfx Aoz Hb Siemrsc Machine weight approx.: 18 t

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 Todpfew E Nkisx Amrjc -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 4,066 mm, total width: 2,583 mm, total height: 1,829 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, overall weight: 4,300 kg, travel distance X-axis: 345 mm, travel distance Z-axis: 125 mm, workpiece weight between centers: 1,000 g, workpiece diameter between centers: 365 mm, distance between centers: 2,000 mm, workpiece length between centers: 2,000 mm, The VDF 560 DUS is one of VDF Boehringer's most popular teach-in turning machines, known for its turning diameter. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency in the production of single items and small series. This machine is currently located in our showroom, and on-site viewing is possible! Tsdpfx Aozwnl Homrjc Additional options & accessories: - Tool cabinet - Various tool holders - Various cutting tools - Double Multifix holder including Capto connection. - Original fixed guard. - Original documentation. Weight & dimensions: 4,300 kg 4066x2583x1829 mm