Used Distribution Cabinet for sale (5,968)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. Ledpfeynwx Ssx Af Ssrt 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Lsdpfjynwxxsx Af Sert Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: good (used), Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet Lredpfx Aefgyf Dof Sst -Distribution box made of: VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Weight: 10.5 kg

Condition: used, Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm Lodpfefgyf Nex Af Ssrt -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Lrsdpfx Ajy Ua Rxjf Sjt Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Servo PANEL BENDER FBA 2016 CNC sheet metal bending machines are characterized by high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, switchgear cabinets, power electronics, elevators, etc. CNC control: Beckhoff Material and bending capacities Max. bending length: 2000 mm Max. diagonal of the sheet: 2400 mm Max. bending height: 165 mm Min. sheet thickness: 0.5 mm Maximum sheet thickness depending on material type Mild steel / carbon steel (410 N/mm²): 2.0 mm Stainless steel (660 N/mm²): 1.2 mm Lrjdpfxoz Eq Tgj Af Sst Aluminum alloy (265 N/mm²): 3.0 mm Machine and system data Number of servo axes: 12 Total power: 36 kW Machine weight: approx. 14,000 kg Dimensions (L × W × H): approx. 4.5 × 2.8 × 2.8 m This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. Lredpfx Afjrtn Nzo Sjt The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Ljdpfx Ajzz Rpcef Sjrt - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Lsdpfx Afjz Agv Uj Sert - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Lodpfjz Agw Eex Af Sjrt - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Lodpjz Ag Rrjfx Af Ssrt - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Lrjdexv D Eyopfx Af Sot Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. Lrodpfx Afszu Nf Aj Sst The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V Lrsdperbzygjfx Af Sst 350 A Cooled Power regulator Load supervision on analog outputs

Condition: good (used), Year of construction: 2020, Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler Lrsdsx Nfktjpfx Af Set -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece -Dimensions: 450/250/H1600 mm -Weight: 56 kg/pc.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Lrsdpfx Asx Exmtjf Sot Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, total height: 2,100 mm, total width: 6,200 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,800 mm, input current: 1,250 A, Siemens Sikus Type 3200 Power Distribution Panel Sub-distribution switch cabinet, distribution panel, power distribution board 400V 1250A (for further information, please refer to image 21) 9x single cabinets 600mm – 1x 800mm = total length 6200mm (contrary to the drawing: 10x 600mm!!) Cabinet dimensions approx. H210xW60/80xD60cm each, incl. plinth and lifting eyes Connection from transformer 1250A to circuit breaker (Siemens 3WN6361-DWA05-1KA1) with coupling switch etc. (images of the circuit diagrams are attached). Three identical Siemens circuit breakers are installed. Equipped with multiple transformer metering on the main switch and residual current monitoring Busbar rated up to max 1600A Outgoing circuits: circuit breakers – Neozed NH00, NH1 fuses, etc. Excellent condition – almost as new – see pictures The dismantling was carried out by a professional electrical company. All copper busbar connectors and screws are included. Internal wiring for energy metering is pulled back and labeled. The cabinets are dismantled and packed on 5 pallets. Weight approx. 4000kg Collection only by appointment in 75053 Gondelsheim Forklift available for loading Ljdpfjynv H Iox Af Sert Shipping by freight forwarder possible, please inquire with ZIP code

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Lrodpowxza Nofx Af Sot Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Ljdpfeykqhfsx Af Sort Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: good (used), Year of construction: 2019, load capacity: 20 kg, arm reach: 1,596 mm, 🔥 GSK RB20 – Industrial Flame Cutting Robot Cell Upgrade your cutting operations with the GSK RB20 industrial robot, engineered for automated oxy-fuel cutting of steel plates and heavy-duty components. This 6-axis robot features high-precision movement and a robust gas control system, ensuring consistent and accurate flame-cutting performance for industrial-scale applications. ⚙️ Technical Specifications - Model: GSK RB20 - Axes: 6 - Payload: 20 kg - Maximum Reach: 1,595 mm - Repeatability: ±0.05 mm - Net Weight: 435 kg - Power Supply: AC 3 × 380 V, 50/60 Hz - Power Consumption: 5.9 kVA - Year of Manufacture: 2019 - Manufacturer: GSK CNC Equipment Co., Ltd 🔧 Equipment and Features Lrjdpfjxtfihsx Af Sjt - Complete oxy-fuel cutting system with gas distribution manifold and pressure regulators - Automatic ignition and shut-off via robot control - GSK robot controller with teach pendant and programming interface - Safety enclosure with status indicators and protective grid - Engineered for heavy-duty steel plate cutting, profile preparation, and bevel cutting operations 🧠 Capabilities - Fully programmable 3D cutting motions (bevels, contours, edge preparations) - Precise torch angle control and consistent cutting distance - Suitable for flame cutting of carbon steels and structural steels up to approx. 150 mm in thickness - Can be integrated into automated production lines or operated as an independent cell ✅ Condition The system is used but remains in good working condition, previously utilized for automated flame cutting of large steel components. All primary components—robot, controller, and gas cabinet—are intact and available for inspection. 📦 Delivery & Options Offered as is, EXW Finland Loading assistance available

Condition: good (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Manufacturer: Ecoair, control cabinet test field on mobile base -Type: 10 outlets -Switching capacity: Outputs 1-5 max. 11 kVA / Outputs 6-10 max. 7 kVA Ljdpfx Aozrufvef Sert -Features: see photos -Dimensions: 2075/1000/H2150 mm -Weight: 373 kg

Condition: used, Several control cabinets with frequency inverters ranging from 37 kW to 45 kW are for sale, in various designs and from different manufacturers. Details: Item No. Sch 6 Control cabinet with 37 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 15 Control cabinet with 37 kW Siemens S5 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S5 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Lodpfx Afoztl N Ie Sort Item No. Sch 45 Control cabinet with 45 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 45 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No.: Sch 47 Siemens S5 control cabinet, Siemens Operator Panel OP393-III ✔️ Ideal as a distribution cabinet or for individual configuration ✔️ With control elements (buttons, emergency stop, display) ✔️ Robust industrial design ✔️ Perfect for modification, expansion, or replacement With Siemens S5 controllers With star-delta circuit for 45 kW With Siemens Operator Panel OP393-III Stock: 1 Available: immediately Condition: Used, good condition (see pictures). Electrical function not tested (or to be adapted). Scope of delivery: Control cabinet as shown Control elements / installed components

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Lsdpfxjzzvf Ao Af Sert Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: used, Year of construction: 2018, Manufacturer: MORETTO, Year of manufacture: 2018, Dry air generator, Type Dehumidifying XD812X, Serial no. 1802877, Control unit, Type XD600, Air distributor, Type Server Flowmatik SR30F120, Serial no. 1808414, Control unit with touch display, 7 drying hoppers, capacity 1x 1,100 l, 2x 480 l, 2x 360 l, 2 storage containers/hoppers, 1x 180 l, 1x 120 l, 7 conveying units, Type Hopper Loader, 2 vacuum pumps, Type VTS50W3 and VTN40W3, 2 cyclone filters, Type C30CPB and FC300PB, Distribution station, Piping/tubing to the injection molding machines, Central control cabinet, Type Logic Server, Storage platform with staircase Ljdjzn Arvjpfx Af Sort +++ Please note: This system is part of an online auction! +++

Condition: good (used), Switch cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3 Rittal SK 3201.300 and Rexroth R911170402-102 and Murr Elektronik 54205 Lsdpfjk S Dazex Af Sort CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402 102, switchbox, distribution box, distribution cabinet, distributor, cooler, cooling unit, imaging, camera, camera cable all other installed parts are included in delivery (see pictures) Overall dimensions (with Rittal cooler):Width: approx. 45 cmDepth: approx. 23 cmHeight: approx. 45 cm Overall dimensions (without Rittal cooler, only the cabinet itself):Width: approx. 30 cmDepth: approx. 23 cmHeight: approx. 40 cm Modules:Keyence CV-5501P digital image receiverKeyence CA-DC20E extension unitKeyence CA-MP81 monitor screenKeyence CA-D3R cable for LED illuminationKeyence CA-CN3 cable camera cableRittal SK 3201.300 thermoelectric cooler (100 Watt cooling capacity)Rexroth R911170402-102 Profibus moduleMurr Elektronik 54205 module interface the cover of the monitor is slightly curved, but should be easy to fix again (glue) You can find more switch cabinets - new and used - in our store! International shipping costs on request!