Used Digicolor Dehumidifying Dryer Dt 204 M for sale (71,209)

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg Hedpfx Aslb Iv Nohgot

Condition: good (used), Year of construction: 2001, Quaser MV 204 II + 4th axis indexing head Year of manufacture: 2001 Control system: - Siemens 810D - Electronic handwheel Spindle: - Max. 10,000 RPM Travel distances: - X – 1020 mm - Y – 600 mm - Z – 560 mm Table: - Table size 1200 × 635 mm - Max. table load 1000 kg Hedszwmv Ropfx Ahgot Tool changer: - 24 magazine positions Availability: - Immediately available

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. Hsdpfoywh E Aox Ahgst 40 liters Small footprint Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air thanks to adsorption rotor technology Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Hjdjzunvajpfx Ahgot Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Year of construction: 2008, condition: used, Digicolor D110 NT dryairdryer 250 Liter Tank year 1991 Hedpfx Aoq Tb I Rshget preis: 1.650 € Contact: Mr. Rainer Eckerle

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. Hjdpsuy Thmjfx Ahgst The offer is valid until 31.12.2024

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h Hjdpfx Ahotty Rajgot

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Hsdpjzvgiuofx Ahgjt Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, M&R dryer with a belt width of 122 cm. The dryer is in excellent condition and is powered by electricity. The belt is wide enough to accommodate two rows of textiles side by side! We have already dismantled the dryer and prepared it for shipping. Therefore, there are no dismantling costs. We will also handle the loading onto the truck. A shipping company is available on site. The shipping price depends on the destination. We recommend direct transport! Hjdpfxjw Stp Ij Ahget

Condition: good (used), Granule dryer, granulate drying plant, granulate conveyor, vacuum conveyor Hodpswuppkofx Ahgot -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: Material VA -Individual components/dimensions: see photos -Dimensions total: 260/250/H830 mm -Weight: 13.6 kg

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C Hedpfx Aoyzaamjhget operating pressure: 7 bar

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: 1CY1116D00007, DONALDSON dryer Buran DC 0125 AB with electronic control with electronic level-controlled steam trap Hodpedy Dqkofx Ahget Technical specifications: Model: BURAN DC0125AB Medium: compressed air, free from aggressive components Flow rate: 2.08 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 1 " Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 645 mm Width: 360 mm Length: 410 mm Weight: 34 kg

Condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor Hsdpfopz Sgfjx Ahgjt -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TR0055_ALMRD225, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD225 Type: ALM-RD225 incl. 2 x air filters Delivery quantity: 3,50 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Hedpfxeg Ufx Ej Ahgst Weight: 78 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 1998, Dryer Digicolor Type: Heater Model: EH 15 AC - T Year of manufacture: 1998 Hsdpfji T Hzzjx Ahgot Plus, vacuum equipment

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), DONALDSON dryer Buran DC 045 AB Hsdedzb Hropfx Ahgjt with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0450AB Medium: compressed air, free from aggressive components Flow rate: 7.50 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 " Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 1,055 mm Width: 645 mm Length: 920 mm Weight: 116 kg

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Hsdpfx Ahsyb Rpdjgot The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: ALM1320400 0816004, used ALMIG dryer ALM1530 year 2016 very good condition Technical specifications: Model: ALM1320 Medium: compressed air, free from aggressive components Flow rate: 20.00 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 1/2" Electric power supply: 400 V±10%/3/PE ; 460 V±10%/3/PE Frequency: 50/60 Hz Dimensions, weight Height: 1510mm Width: 1129 mm Length: 857 mm Weight: 314 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately. Hodpfx Aeix Al Rohgst

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: Hodpszhcrvsfx Ahgjt 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Technical data: Hsdpfx Ahjziqnhegjt Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Pendant control CE marking Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Year of construction: 2022, condition: as good as new (ex-display), NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD660 Type: ALM-RD660 incl. 2 x air filters Delivery quantity: 10.38 m³ / min * Compressed air connection 2 " Dimensions L x W x H: 678 x 648 x 1157 mm Weight: 165 kg Hodpfx Ahoipm Huegst * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2021, condition: as good as new (ex-display), NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD990 Type: ALM-RD990 incl. 2 x air filters Hedpjipm Aqefx Ahgjt Delivery quantity: 15,50 m³ / min * Compressed air connection 2 " Dimensions L x W x H: 948 x 728 x 1370 mm Weight: 220 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, volume flow: 124 m³/h, Exhibit: RENNER RKT + 0125 compressed air dryer with level-controlled condensate drain Hedpfeu Iwc Rox Ahget Year of manufacture: 2022 Volume flow: 2.08 m³/min (at 7 bar and ambient temperature of 25°C) Pressure dew point: 3°C max. pressure: 16 bar Connection thread: G 1 1/4" Dimensions: Length: 345mm Width: 525mm Height: 851mm Weight: 45kg Convenient leasing for new machines is possible through our bank. Visit our store. We always have a large selection of new and used compressors in stock! Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hjdpjzg Iw Ijfx Ahgjt Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Hsdpfxoypb Dus Ahgjt Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!