Used Deufra As 25 for sale (22,703)

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor, gas pressure regulator, electrohydraulic drive, rotary actuator -Manufacturer: Deufra, electric actuator, rotary actuator -Type: AS 25 Gedpfx Aozkhqcekyobu -Voltage: 400 V / 0.1 kW -Mounting: Bolt circle Ø 101 mm M10 / Ø 70 mm M8 -Dimensions: 460/310/H190 mm -Weight: 19.7 kg

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 4,700 kg Service valid until: 05/2027 Safety inspection valid until: 05/2027 Operating hours: 5,917 h Godpfoz Iwqksx Akyobu EQUIPMENT Former Still full-service unit 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear If the mast is too high, it can be dismantled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged if collection is not made on time. Outstanding storage fees must be paid in full before collection. Lot number: 159

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump Gsdpfx Akoz Ekcnjyebu WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Gedpfx Akexz R Ixeysbu Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 2,500 V, input frequency: 50 Hz, nominal power (apparent): 32 kVA, We offer a selection of brand new Schneider Electric components, all in original factory packaging. This equipment is ideal for industrial electrical installations, switchboards, and power distribution systems. 🔹 Switch Disconnectors (3P, 4P): Schneider MTZ2 25HF Schneider MTZ2 25HA Schneider MTZ2 16HA 🔹 Compact Breaker: Schneider NS630b – 1600 A Compact 16 pc Schneider EF593816 – Front power connections NEW! 🔹 Molded Case Circuit Breakers (MCCB): Schneider NW25H2 – 2500 A – 4P Availability: In stock, ready for dispatch Photos, technical datasheets and prices available upon request Gbedpfewrzl Sjx Akysu

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Gbodpfx Aezp Nknskyju Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Year of construction: 1993, condition: good (used), 1 x parts washing machine Gsdpfjnl Ekrex Akyebu Schwanog Waschomatic W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 360 mm Slot dimensions: 2.2 x 18.5 mm Installation dimensions: L: 0.8 x W: 0.85 x H: 1 m The machine can be inspected at our warehouse at any time while it is powered on.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 250 kg, load capacity: 25 kg, controller manufacturer: Yaskawa, controller model: YRC1000, teach pendant manufacturer: Yaskawa, Equipment: documentation/manual, Industrial robot YASKAWA GP 25 Control unit YRC 1000 This robot was only used as a demonstration robot. Only about 600 operating hours. Ready for collection. Gbodpexb T Syefx Akysu

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective Gbsdpfx Ajzdwtyskyju

Condition: used, functionality: fully functional, Year of construction: 1992, load capacity: 8,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, fork length: 2,500 mm, drive type: Diesel, Sideloader Gbodpfeu Aczuox Akysu Mast type: Standard Technical condition: good

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Gsdoz Nplkspfx Akysbu Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Condition: used, Year of construction: 2009, operating hours: 5,207 h, functionality: fully functional, machine/vehicle number: MPC 250, saw blade diameter: 500 mm, cutting depth: 50 mm, cutting width (max.): 250 mm, power: 9 kW (12.24 HP), total height: 1,500 mm, total length: 21,000 mm, total width: 2,000 mm, type of input current: three-phase, overall weight: 3,150 kg, MODEL MPCNC 250 FAST Instal power [kW] 11,6kW (25A) Saw blade motor [kW] 5,5 Rools motor [kW] 3,5 Saw blade Dia [mm] 500 x 3,5 x 40, Z 92 Infeed rolls[piece] 6 Godpjz Ilttofx Akyobu Pressing rolls [piece] 6 Saw blade speed [m/s] 89,9 Saw blade revolution [min-1] 89,9 Cutting area s = 50 - 250 mm s = 100 - 180 mm Outlet dia 2 x fi 120 mm Air (at 30m/s) 2400 m3/h Air consumpt (6.10bar or. 5 Pa) 270 NL/min Min cut (sec) 0,3 (0,12) Max feeding speed 240 m/min Max acceleration 32 m/s2 INPUT MATERIAL edged pieces Input length od 900 do 5000 mm Thickness - adjustableo od 15 do 90 mm

Condition: used, Year of construction: 2020, For sale: HOUFEK BASSET PBH250 belt grinding machine, manufactured in 2020 in the Czech Republic. This machine features a robust industrial design with a large 800 × 2500 mm work table, ideal for grinding, smoothing, and finishing surfaces of larger parts. The 150 × 7000 mm long grinding belt and adjustable work table allow for convenient processing of both individual parts and larger workpieces. The grinding head can be tilted up to 90°, making the machine suitable for grinding edges of parts as well. houfek.com Key information: Manufacturer: HOUFEK a.s. Model: BASSET PBH250 Year of manufacture: 2020 Gedpfx Akez Izt Aeyebu Made in: Czech Republic Serial No.: PB-3604 Technical specifications: Motor power: 3 kW Motor speed: 1400 rpm Grinding belt speed: 17 m/s Grinding belt dimensions: 150 × 7000 mm Work table dimensions: 800 × 2500 mm Vertical work table travel: 540 mm Horizontal work table travel: 700 mm Max. workpiece weight: 100 kg Grinding head tilt: up to 90° Dust extraction connections: 2 × Ø100 mm Power supply: 3/N/PE 400 V / 50 Hz Nominal current: 7 A Protection class: IP54 Machine weight: 556 kg Key advantages: Large 800 × 2500 mm adjustable work table Long 150 × 7000 mm grinding belt 17 m/s grinding belt speed 540 mm vertical and 700 mm horizontal work table travel Grinding head tiltable up to 90° Robust industrial design Dust extraction from both sides of the machine CE marking If you have any further questions, we will be happy to answer them.

Condition: used, mileage: 1,361,000 km, power: 250 kW (339.91 HP), first registration: 10/2008, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, crane, parking heater, Information in English: DAF FTS XF105.460 SSC EURO 5 6X2 FASSI F330D.25 33 TON/METER CRANE REMOTE First registration: 10 - 20 Valid inspection: Mileage: 1,361,000 km Chassis number: XLRTS48M0E828432 Engine power: 340 kW (460 HP) Transmission: Automatic Wheelbase: 510 cm (axle 1 to axle 3) 370 cm (axle 1 to axle 2) Own weight: 14,930 kg GVW: 28,000 kg Colour: Orange Suspension: Front leaf, rear air suspension Emission class: Euro 5 Configuration: 6X2 Tyres axle 1: 385/65 L90% R90% Tyres axle 2: 315/70 L30% R30% Tyres axle 3: 315/70 L50% R50% 5th wheel height: 122 cm Cab type: Super Space Cab Extras: MX Engine Brake, Air conditioning, Parking heater, Refrigerator, Cruise Control, Spoiler, 620 liter aluminum tank (Original DAF), 27MC, Toll system preparation, Complete service history at DAF, Gearbox completely overhauled at 1,300,000 km, Original Dutch truck, Fassi F330 D.25 33 ton/meter crane, 5x hydraulic extendable. Crane: Fassi F330 D.25 33 ton/meter crane, 5x hydraulic extendable. Serial number: 6544. Remote control, Complete with crane manual. Load capacity: 2.20 m => 11,500 kg 2.85 m => 9,500 kg 4.60 m => 6,510 kg 6.45 m => 4,445 kg 8.40 m => 3,265 kg 10.4 m => 2,540 kg 12.4 m => 2,5 kg 14.6 m => 1,715 kg Further information: * Payload: 13,070 kg * Width: 2,500 mm * Length: 7,700 mm * Tyre size | Front axle: 385/65 R22.5 * Tread depth inner left | Front axle: 50% * Tread depth inner right | Front axle: 50% * Maximum axle load | Front axle: 9,000 kg * Tyre size | Rear axle 2: 315/70 R22.5 * Tyre size | Rear axle 3: 315/70 R22.5 Gbsdpsz Ivgqefx Akyou * Tread depth outer left | Rear axle 2: 30% * Tread depth outer left | Rear axle 3: 30% * Tread depth inner left | Rear axle 2: 30% * Tread depth inner left | Rear axle 3: 30% * Tread depth outer right | Rear axle 2: 30% * Tread depth outer right | Rear axle 3: 30% * Tread depth inner right | Rear axle 2: 30% * Tread depth inner right | Rear axle 3: 30% * Maximum axle load | Rear axle 2: 11,500 kg * Maximum axle load | Rear axle 3: 7,500 kg * Wheelbase: 510 cm * Cab: Yes * Price on request: Yes * Position | Front axle: Front * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Position | Rear axle 2: Rear * Position | Rear axle 3: Rear * Brake type | Rear axle 2: Disc brakes * Brake type | Rear axle 3: Disc brakes * Suspension | Rear axle 2: Air suspension * Suspension | Rear axle 3: Air suspension * Reduction | Rear axle 2: Single reduction * Lift axle | Rear axle 3: Yes * Twin tires | Rear axle 2: Yes * Twin tires | Rear axle 3: Yes * Driven | Rear axle 2: Yes * Differential lock | Rear axle 2: Yes Further equipment: * 9-ton front axle * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip control (ASR) * Automatic transmission * Heated mirrors * Differential lock * Power windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * Speed limiter * Speed control system * Air conditioning * Refrigerator * Power steering * Air suspension * Parabolic suspension * PTO (Power Take-Off) * Radio/CD player * Disc brakes * Sleeper cab * SemCollection * SemStars * Parking heater * Central lubrication system * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp:

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM Gbsdpfx Akeud Urrjyju -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW Gbodpsz Ekchofx Akysu EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, Year of construction: 2012, operating hours: 2,300 h, functionality: fully functional, total width: 2,500 mm, total length: 8,000 mm, total height: 2,200 mm, operating pressure: 300 bar, pressure: 180 bar, bale width: 650 mm, bale length: 850 mm, bale height: 6,980 mm, overall weight: 21,500 kg, For sale: a hydraulic press for crushing car bodies, manufactured by the reputable company ECOTECNICA, model ORCA S5250-P. Year of manufacture: 2012 Engine: Deutz D91, 6-cylinder, 150 HP Gjdpjz Afa Esfx Akyebu Pressure: 300 bar This machine has been operating reliably in our company. Operating hours: approximately 2300. Price negotiable.

Condition: used, Max saw blade diameter: 400 mm Min saw blade diameter: 250 mm Saw blade spindle diameter: 30 mm Scoring blade diameter: 125 mm Scoring blade spindle diameter: 20 mm Scoring blade with separate motor Electric saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Table length: Table lock Work table: Table extensions Dust extraction port diameter: Dust hood: 3000 mm long fence with 2 stops Guard Safety switch Power supply: 400 V Motor power: 4.5 kW Saw blade speed: 5000/4200/3200 rpm Manufacturer: CASOLIN Overall dimensions: Length: 3420 mm Width: 3780 mm Gbsdjzh Hcxjpfx Akyou Height: 1600 mm

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Gedpez Abcpjfx Akyobu Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1995, functionality: fully functional, Hämmerle / HRC Dividing Straightening Machine 80.1250 | 1,250 mm | 19 Rolls | ARKU Overhaul 2020 For sale is our Hämmerle / HRC dividing straightening machine 80.1250, manufactured in 1995. According to the available documentation, the machine was overhauled by ARKU in 2020 and is suitable for straightening laser-cut, flame-cut, and stamped parts. Technical data according to machine documentation: Maximum material width: 1,250 mm Specified material thickness range: 0.8–20 mm 19 straightening rolls with 80 mm diameter Straightening speed: 2–20 m/min Infeed table with recessed ball rollers Driven discharge roller conveyor, approx. 2 m Year of manufacture: 1995 The actual material cross-section that can be straightened depends, among other things, on the material, material width, and part geometry. We would be happy to discuss your specific application using concrete parts as examples. Gsdpfez Eabyex Akyobu Price: €140,000 net, negotiable, ex works Leopoldshöhe. The machine is available for immediate delivery. Inspection by appointment; dismantling, loading, and transport are not included in the price. We will provide documentation on the overhaul to interested parties, if available. Please include information on the material, sheet thickness, and part size with your inquiry.

Year of construction: 2003, condition: used, SCHNELL Idea 12/25 assembly machine Gbodpfsymb Nrox Akyou Machine recently dismantled in working order, production stopped. 3 payoffs Payoffs: 3

Condition: used, Year of construction: 2005, feed rate X-axis: 60 m/min, plate length: 2,500 mm, plate width: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum plate width: 1,200 mm Maximum plate length: 2,500 mm Minimum plate width: 220 mm Minimum plate length: 250 mm Maximum feed rate: 60 m/min EQUIPMENT 90° transfer conveyor CE safety compliance The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. Gedpfxsz Ekfcs Akyjbu External reference: 5981

Condition: like new (used), Year of construction: 2022, operating hours: 25 h, functionality: fully functional, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, turning diameter over top slide: 210 mm, center width: 635 mm, quill stroke: 110 mm, total length: 1,700 mm, total width: 1,000 mm, total height: 1,400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, type of input current: three-phase, overall weight: 700 kg, Equipment: documentation/manual, type plate available, Colchester Student 2500 lead and feed spindle lathe (year of manufacture 2022) – including digital display and Multifix quick-change tool holder For sale is a precise Colchester Student 2500 lead and feed spindle lathe. The machine is in new condition. It is fully functional and in stock in Austria (Graz). It features an ACU-RITE digital display and a MULTIFIX quick-change tool holder. • Manufacturer: Colchester • Model: Student 2500 • Year of manufacture: 2022 • Condition: New (used) • Functionality: 100% functional • Location: Graz, Austria • Images/Videos: Images and videos of the machine will be provided upon request. Technical data: • Distance between centers: 635 mm • Swinging diameter over bed: 330 mm • Swinging diameter over cross slide: 210 mm • Swinging diameter over compound slide: 330 mm • Swinging diameter in the gap: 480 mm (removable bridge) Spindle and drive: • Main spindle bore: 40 mm • Spindle mount: DIN 55029 D1-4 • Spindle speed (max.): 2,500 rpm • Speed steps: 12 (speed range: 40–2,500 rpm) • Drive power: 2.2 kW Tailstock and feeds: • Taper in tailstock: MK 3 • Quill stroke: 110 mm • Longitudinal feeds: 0.03–2 mm/rev • Cross feeds: 0.015–1 mm/rev • Metric threads: 0.2–14 mm • Whitworth threads: 2–56 threads per 1" Dimensions and weight: • Weight approx.: 700 kg • Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm EXTENSIVE EQUIPMENT • 2-axis digital display: ACU-RITE® DRO 203 for precise working • Tool holder: Quick-change steel tool holder MULTIFIX • Safety: Foot brake with brake pedal along the entire length, chuck guard, spindle cover, movable steel tool holder guard • Cleanliness: Chip collection tray with front opening flap, rear splash and chip guard • Extras: Integrated coolant system, work area lighting, threading dial • Documentation: Original operating manual including CE declaration of conformity Interested? Gsdpfx Aezkhvrokyebu An inspection with the machine powered on can be arranged.

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Godpfxjx Enape Akyebu Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm cutting width 1250 mm Motor output 4,0 kW Gbsdpfxjz E Sv Nj Akyeu Cutting height 90 mm Speed 4000 / 6000 U/min. weight of the machine ca. 650 kg