Used Dcm Leopard Lma for sale (1,439)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: Gsdpfxoyx Uy Ae Akyskc • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Gkedpfx Akoz Ekkxeyec Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! Gedpoz Hu Siefx Akyekc TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 454 31178 T15, Max. master reel width: 1400 mm Max. master reel weight: 1000 kg Max. master reel diameter: 1000 mm Minimum standard slit: 25 mm Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Gjdpfxezhwgbj Akyekc Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning 6 motors Automatic web tension control through loading cells The machine has chucks for 76 and 152mm The machine has positioning for top knife AND bottom knife; the Automatic Slit Positioning handles the positioning of both the knife and the counter knife APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals MATERIALS: PE, Aluminium, Papers & Laminates

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application Gsdozka T Aspfx Akyjkc • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Condition: used, Year of construction: 1986, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, disc diameter: 350 mm, A.COSTA LEOPARD /2/75 Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Maximum disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Gkedpfswi I Hksx Akyec Automatic central lubrication Electric height adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-expel latches Weight: ± 5,500 kg 2 spare sleeves and spacers Infeed table: Infeed table connected to the main machine. Total length: 400 cm Number of rollers: 2 straight, 14 inclined. TOTAL: 16 lower rollers + 2 upper rollers Upper rollers with pneumatic pressure

Condition: ready for operation (used), Year of construction: 2019, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: ML0336-000164, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 51 mm, controller model: Siemens S828D, TECHNICAL DETAILS Main spindle speed: max. 6,000 rpm Travel in X-axis: 205 mm Travel in Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 36 m/min Swinging diameter over bed / turret: 600 / 400 mm Torque: 127 Nm Hydraulic 3-jaw chuck: 170 mm Gkjdezzx Igspfx Akyoc Workpiece size: max. Ø 300 × 510 mm Bar diameter: max. 51 mm Chuck outer diameter: 152 mm Tool stations: 12 Tool cross-section: 20 × 20 mm Tools: max. 24 Turret indexing time: 0.11 s MACHINE DETAILS Control model: Siemens S828D Main motor power: 12.6 kW Power of driven tools: 6.2 kW High-pressure coolant pressure: 0.7 MPa Dimensions & Weight Machine dimensions (L × W × H): 2,540 × 1,595 × 1,693 mm Machine weight: 3,480 kg Operating hours: 43,500 h EQUIPMENT High-pressure coolant system, 0.7 MPa Transformer Chip conveyor Tool measurement / tool probe Collet chuck with 3 collets LNS bar feeder for bars up to max. 1.5 m length Workpiece catcher and ejection system Tool load monitoring CE conformity Highly rigid cast iron machine bed 12-position turret with accommodation for max. 24 tools Automatic bar feeder Oil separator for coolant Roller-guided linear guides Documentation/manual Spindle speed continuously adjustable

Condition: used, cutting height (max.): 200 mm, cutting width (max.): 380 mm, saw blade diameter: 350 mm, total length: 3,000 mm, total width: 2,200 mm, total height: 1,900 mm, overall weight: 5,000 kg, A. COSTA LEOPARD double-shaft wide belt sander, 2x75kW (100hp) Gksdpsy Rzygefx Akysc

Condition: excellent (used), Year of construction: 2016, Kliper DCM 90, lightly used, fully operational. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Gkodpfx Ajykrxlekyoc

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Gkodpfozhh Uvex Akyjc Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: good (used), Year of construction: 2012, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Girder (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Because the control unit is rigidly connected to the load-carrying device, the operator only needs one hand to operate the chain hoist and guide the load. Application High-quality and sensitive parts can be lifted, lowered, and positioned more gently and safely. Installation processes and assembly operations can be controlled more precisely. Lifting movements can be performed much faster thanks to the almost twice as high nominal speed per lift in the partial load range. Design plug and lift - all electrical connections of the chain hoist are pluggable with a foldable, universal suspension bracket, the hoist can be easily attached to the carriage fatigue-free operation thanks to the ergonomically optimized and robust DSC control switch fast replacement of the entire chain drive without disassembling motor or gearbox parts contactor control 24 V, protection class IP55 operating hour counter end-of-travel switch for the upper/lower hook position high safety and long service life thanks to speed-monitored brake/slip clutch principle Advantage one-hand operation, i.e., the control unit is located above the part to be handled (left and right-hand operation via rocker switch) quick-release coupling enables universal use through easy replacement of the various load-carrying devices Technical Data Brand DEMAG EAN 4039247450527 Manufacturer Article Number 93200146 Load Capacity 80 kg Lifting Height 2.8 m Lifting Speed Control In 2 stages Lifting Speed Fine Lift 4 m/min Lifting Speed Main Lift 16 m/min Number of Load Strands 1 pc Overall Height (H) Gsdpfx Aohwd E Nekyokc 694 mm Length 422 mm Depth 268 mm Model DCM-Pro 2-80 V16/4 Control GSA Type 4 Color Azure Blue RAL 5009 Subject to mandatory inspection according to DGUV (UVV) Yes Delivery Unit 1 Gross Weight 25,000 kg Range of movement: 3 meters to the side and 2 meters forward/backward Condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2017, condition: used, empty load weight: 60 kg, Manufacturing year: 2017 Power: 2200 watts Voltage: 230 volts Gedpfxsz Ew Eij Akyekc Weight: 60 kg Well-maintained floor sander. Multiple units in stock. Price: € 750,- ex VAT

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, DMG Deckel Maho DMC 1035 V vertical machining center, year of manufacture 2006 The machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free loading onto truck Gsdpfx Akoz I Dl Isyjkc Location: 72178 Waldachtal !!!!!The machine must be collected on 21.10.2026! We can offer transport if required!!!!! Payment terms: Payment in advance – by bank transfer Internal number: 180-1 Can be inspected while powered on: Yes Technical data: - Operating hours (machine on): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Angle plate - Manual dividing head - Swivel vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►If required, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of all warranties. ►Technical data without guarantee. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: ready for operation (used), Year of construction: 2007, operating hours: 71,852 h, functionality: fully functional, machine/vehicle number: 15145361464, table length: 4,000 mm, overall weight: 32,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 39,785 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, DECKEL MAHO DMF 360 Linear – CNC Machining Center Year of manufacture: 2007 Control: Siemens CNC control Machine type: 3-axis CNC vertical machining center The DECKEL MAHO DMF 360 Linear is a high-quality CNC machining center designed for precision milling and machining of complex components. The machine features a rigid and stable construction, linear drive technology and Siemens CNC control, providing high accuracy, excellent surface quality and reliable operation. The DMF 360 Linear offers a large working area and is suitable for a wide range of machining applications, including milling, drilling, tapping and contour machining. Main features: Manufacturer: DECKEL MAHO Model: DMF 360 Linear Gedoz I D E Uspfx Akyokc Year: 2007 CNC control: Siemens 3-axis machining Linear drive technology Vertical machining center Suitable for precision milling, drilling and tapping Rigid construction and high machining accuracy Suitable for single-part production as well as series production The machine is a reliable and versatile solution for metalworking companies looking for a high-quality CNC machining center with Siemens control.

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm Gjdpfxjw H R R He Akyokc – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Gjdpjz Acyisfx Akyskc

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Tool holder: SK 40 Gedpfx Aoz N Adgokyjkc Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery.

Condition: used, Year of construction: 2022, - Brand : Comet - Type: Leopard 25 - Year of construction: 2025 - Weight: 4070 kg. - Hours : 652 hours - Drive: Petrol + 220 volts Godpfxowhqifo Akyskc - Working height: 25.5 meters - Lateral reach: 11.5 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Comet *Type: Leopard 25 * Construction year: 2025 * Weight: 4070 kg. * Hours: 652 hours * Drive: Petrol + 220 volts * Working height: 25.5 meters * Lateral reach: 11.5 meters * Lifting capacity: 200 kg.

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm Gkedpfx Akswrw D Rjyjc weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Year of construction: 2016, condition: used, Gas supply: natural gas from the public gas network, gas treatment: drying using a molecular sieve, max. refueling pressure: 300bar(g), natural gas compressor station capacity: 630m³, storage type: SP28, storage pressure: 300bar(g), inlet pressure: 2.5-700mbar(g), storage type: SP28, storage volume: 2.24m³, storage pressure: ≤300bar(g), compressed air/gas supply (Pₛ,in/Pₛ,out,EGT): 1bar(g)/300bar(g), temperature range: -10 to 50°C/-10 to 60°C, volume flow rate: 74-113Nm³/h, power consumption: 36kW, noise level: 65dB(A) at a distance of 1m, length: 4,850mm, width: 2,690mm, height: 3,100mm, weight: approx. 30t, including documentation. Godpfoz R A Nxox Akyskc

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Godey Tni Tspfx Akyekc

Condition: used, Year of construction: 2003, functionality: fully functional, Sale only within the EU. Without the pneumatic tensioning device! Gedpfx Akjz N Eaksyskc Dismantling and loading will be carried out by the seller. Transportation will be handled by the buyer.

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) Gksdez Indhjpfx Akyec • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: used, A.COSTA LEOPARD multirip saw with double arbor - Max cutting depth: 200 mm - Width of track: 350 mm Gksdpfx Akjvf Dagjyec - 2 x 55 KW / 75 HP - Weight: around 5 tons

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, located in 45891 Gelsenkirchen, is a Seydelmann Konti cutter, model KK 140 AC-6. The cutter was manufactured in 2023, is used, and comes from a business liquidation. Currently, the cutter is still connected to power and can be inspected by appointment. We will gladly provide you with the technical specifications upon request if you are interested in purchasing it. Gedpfez Izntex Akyokc Dismantling and loading are the responsibility of the buyer.