Used Dalex- Werke Spot Welder for sale (2,028)

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Itjdpsu Sb Dtefx Akxsf

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Adjustable reach: 280 to 550 mm Electrode stroke: 15 to 85 mm Welding parameters for sheet steel: approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow 3 l/min Ijdpey A Hr Sofx Akxotf Weight approx. 122 kg Welding controller T 90 Mark II Operating instructions and manual available Working stroke triggered by pneumatic foot pedal We have cleaned and inspected the spot welder, the condition is very good, looks like new.

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Itsdpfeyxrhdox Akxef Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Itodpfxjg U A Uzo Akxsf Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz - Welding controller TE750 or TE760 - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. Itedpfx Akjtvpiloxsf There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires.

Condition: good (used), Good working condition. Please check out our other listings as well. Itjdpfxon Uv Uls Akxof

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Itodeit Rq Hopfx Akxjf Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm Isdpfx Ajw T Tlfjkxotf • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz

Condition: excellent (used), Welding current max.: 5kA Welding force: 45-150N Closing stroke: pneumatic Welding pressure: pneumatic, resetting unit with disk spring Force adjustment: Proportional valve Electrode shape: cylindrical, 6mmØ --- Welding control: optional (according to recommendation) --- equipped with: - Base body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder - Welding head top F120K with repositioning unit - pneumatic valve units - Pneumatic air cooling unit for electrodes - Workpiece carrier on dovetail guide, for exact positioning to electrodes positioning to electrodes --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage Ijdpfstq Ez Eex Akxetf

Condition: excellent (used), foot-operated, water-cooled rocker arm spot welding machine Brand: DALEX Model: easyspot 35 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 5.1 V Itjdpfxjyxp Rpj Akxsf Electrode force: 17-278 daN Arm spacing: 140 or 300 mm Throat depth: 180-500 mm with attached control cabinet according to VDE 0100 Synchronous welding control Main switch

Condition: excellent (used), Year of construction: 2017, operating hours: 2,700 h, functionality: fully functional, arm reach: 2,033 mm, type of input current: three-phase, total height: 2,360 mm, total width: 5,203 mm, total length: 7,442 mm, load capacity: 600 kg, overall weight: 10,000 kg, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 600 kg, protection type (IP code): IP54, year of last overhaul: 2025, compressed air connection: 6 bar, repeat accuracy: 0.06 mm, Equipment: cabin, We are offering this very well-maintained DALEX / KUKA spot welding cell with robot handling, year of manufacture 2017. Itjdpfxsyhcipo Akxef Manufacturer: DALEX / KUKA Model: Spotwelding Cell Robot Manipulated Machine type: Welding Robot Year of manufacture: 2017 The machine is a specialized welding system designed for spot welding pre-formed stainless steel components. The welds are created with pneumatically operated resistance spot welding tongs or a pneumatic spot welding unit. The setup includes one robotic arm for performing the resistance welding process and a second robotic arm for positioning and handling the welded parts. Out of operation since 2024. Annually maintained, including maintenance scheduled for 2025! Cell dimensions: 7442 mm x 5203 mm Robotized spot welding cell in compliance with EC conformity 200/427EG 2004/108/EU Electromagnetic Compatibility (EMC) / 2006/95/EU Low Voltage Directive / 2003/10/EG Noise Emissions 2x KUKA KR60-3 robots (service by KUKA scheduled for 01/2025) Operating hours: Robot 1: 4,500 h / Robot 2: 8,200 h Nominal payload capacity: 600 kg Maximum reach: 2,033 mm Mounting position: Floor Repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Ambient operating temperature: 10 °C to 55 °C (283 K to 328 K) Protection rating (IEC 60529): IP65 2x KUKA KR300 R2500 ultra robots (service by KUKA scheduled for 01/2025) Operating hours: Robot 1: 2,700 h / Robot 2: 6,100 h Nominal payload capacity: 300 kg Maximum reach: 2,496 mm Mounting position: Floor Repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Ambient operating temperature: 10 °C to 55 °C (283 K to 328 K) Protection rating (IEC 60529): IP65 Control software: SW8.3.30 Resistance welding unit Harms & Wende mid-frequency inverter 2x Genius HWI408 If you have any questions or require more information, please send us a message or give us a call.

Condition: excellent (used), Butt welding point for one-sided accessible welding points with counter pole and welding cable 1600 mm long with change-over switch for operating mode "STOSSPUNKTEN" o r CONNECTION FOR DALEX POINT WELDING TONGS, Series 31 Itodpfopudqmox Akxsf with connection cable, main switch 16 A CEE connecting plug

Condition: excellent (used), Year of construction: 1990, Max. Grinding Area: 650 x 370 mm Longitudinal Table Movement, hydraulic: 650 mm Iedpfjy D Ad Hox Akxstf Longitudinal Table Movement, manual: 700 mm Cross Table Movement, hydraulic: 330 mm Cross Table Movement, manual: 370 mm Grinding Spindle Speed: 1450 rpm Table Speed: 5 - 25 m/min Cross Feed: 1.1 mm/min Grinding Wheel Dimensions: 355 x 50 x 127 mm Machine Dimensions (L x W x H): approx. 2700 x 1850 x 2050 mm Weight: approx. 2100 kg Accessories / Special Features: • Automatic vertical feed • As-new safety doors • Electromagnetic chuck 600 x 300 mm • Coolant system • Separate hydraulic unit • Grinding wheel with flange • Control panel on swing arm • Manual dressing device with diamond Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine Itsdey Au Nfepfx Akxof -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg Itjdpfsy Au Eyjx Akxjf

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm Itedpfjyz Rd Aox Akxef -Weight: 535 kg / 112 kg

Condition: used, Dalex Works Pms 10-2 Ijdpfx Akeg Rcpxexotf 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Year of construction: 1970, condition: used, Spot welding machine Make Dalex type SF 16 Itodpjk Tt Hfofx Akxof Continuous power 16 KVA at 50 % ED

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Itedpfsyi Ex Nox Akxjf

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN Ijdpfx Akjxtqv Tjxotf horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Bracing between the feet made of standard steel (see photos) Inner diameter: 2,200 mm Isdoxqcpgepfx Akxjtf Total height: 5,900 mm Heating/cooling: available Max. permissible operating temperature: 3 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 1.0 bar Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 15,000 liters Double jacket volume: 30.0 liters Cylinder wall thickness: 3.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,360 mm Last application: brewery TANK Max. permissible operating temperature: 25 °C Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.4 mm

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 +++ Note: This machine is part of an online surplus sale! +++ Itodex Ahg Uepfx Akxsf

Condition: excellent (used), machine/vehicle number: 4220.515, range of control: 20 - 180 A welding circuit at 100% ED: 135 A electrical connection: 380 V Iodpfx Aod Hn Ufekxstf space needed: 650 x 550 x 850 mm weight: 118 kg

Year of construction: 1989, condition: used, machine/vehicle number: 89 051 371, Primary voltages U1 V1 W1: 400 V U9 V9 W9: 257 V U10 V10 W10: 246 V U11 V11 W11: 235 V Secondary voltages: Ijdpfxodqrl Ss Akxstf U1 V1 W1: 710 V at 400 U3 V3 W3: 650 V Primary voltage: U4 V4 W4: 540 V U5 V5 W5: 475 V U6 V6 W6: 475 V U7 V7 W7: 446 V U8 V8 W8: 430 V Rated power: 50 kVA Space requirement: 870 x 680 x 850 mm Weight: 300 kg

Condition: used, machine/vehicle number: B.739, Outer Ø: 400 mm Itjdpfx Aeb Nzi Iekxef Bore: 95 mm Flange width: 100 mm Short taper size 6 Weight approx.: 52 kg