Used Cross Flow Microfiltration Unit for sale (34,642)

Year of construction: 1991, condition: used, The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank. Additional title: yeast-beer recovery Capacity: 7 hl/h Tol. operating pressure: 10 bar Tol. operating temperature: 85 °C Max. filter area: 26 m^2 Bledpfsvcq Dasx Ak Eog Current: 4,85/2,8 A Voltage: 220/380 V Frequency: 50 Hz Operation / Control: Simatic S5 Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: GSVW-3080-1250-1-F, functionality: fully functional, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. Bledpswrb Nksfx Ak Esg - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Year of construction: 2005, condition: ready for operation (used), A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible. Bsdpfx Akoywy Rke Eslg

Year of construction: 2006, operating hours: 35,000 h, condition: used, functionality: fully functional, From the dismantling of an MBT plant, one cross-flow separator from SUTCO/Nestro is available for sale. The machine was operating flawlessly until the plant was shut down. An on-site inspection in advance is essential. Dismantling of the unit must be carried out by the buyer. Further information is available upon request. Blodpfx Aksyhmh Aj Esg

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² Bedpfx Aksbidg Ee Eolg speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Condition: new, functionality: fully functional, machine/vehicle number: Flowpack, Year of construction: 2023, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Bledoq Ikfmopfx Ak Ejg Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Bsdpoinwi Hjfx Ak Eelg Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Bsdpeq Ikgyefx Ak Eslg Delivery time: Current delivery time under 10 weeks Features: • Box-motion end sealing • Manual reel fixation without compressed air • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Blsdpjlqwz Tefx Ak Esg

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition Bedpfxjyxtf Rs Ak Eslg - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan Bodpfxeyc H I So Ak Eslg • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Blsdpou Tg I Dsfx Ak Ejg Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  Capacity: approx. 50 hl/h (tandem system, 24h operation) Filtration type: Crossflow (microfiltration) Number of modules: 48 Operating temperature range: 0°C to 70°C Equipment: Pumps, integrated CIP system, complete piping, control system Control system: Siemens S7 with Siemens OP07 HMI Automation level: Fully automatic Equipment  Filtration modules (48 units) Product pumps Integrated CIP system Complete piping system Bljdpfoy Etcpex Ak Ejg

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 9 drawers Blodpfoy Ehkbsx Ak Eog – large format, approximately 117 x 104 cm inside the drawer – each drawer has its own bearing. Made in Germany

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. Bsdpfx Aoy D Uzqjk Eslg This is an ex bakery machine, in good working condition

Condition: used, Year of construction: 2006, operating hours: 7,600 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Bodpfx Ajy D A Ifsk Ejlg Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Blodpfx Akovg U Dxs Eog Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) Blodpfx Akjguqucj Eeg 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 Bodpfewnidhex Ak Eelg - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Bsdpehw Nfqefx Ak Eolg Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: used, Year of construction: 2006, Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Max. 12 modules (10 functional, 2 defective) Control system | Siemens | Simatic Multi Panel | Touch control Pump system | Integrated pumps CIP / Backflush system Instrumentation | Pressure sensors, manual valves per module Bodjyycqlspfx Ak Eelg

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Bedpsyil A Sofx Ak Ejlg Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Blodpfjyfhnrex Ak Eog Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Bljdpfxjd Ecncj Ak Eeg Number of laser lines: 2 Weight: 485 g

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,853 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details. • Cutting technology: Abrasive waterjet cutting • Working area: 3000 x 2000 mm • Pump power: 75 kW • Maximum pressure: 60,000 / 65,000 psi • Delivery volume: 0.91 gpm (3.4 lpm) • Voltage/Frequency/Phase: 480 V / 60 Hz / 1 Ph • Full load amps: 1.0 A • Enclosure type: 4 • Electrical diagram: 013659-DWG • Operating hours (control): approx. 4,853 h • Pump hours (service report): approx. 7,715 h • Machine hours (service report): approx. 32,811 h • Included components (integral to machine): High-pressure system, Intensifier pump, Cutting head, Cutting tank, Operating computer / Control unit • Due to a detected play in the axes, the machine can not currently move to a reference point • Software and Flowcut must be replaced Additional equipment • Abrasive system Bedpfx Aksyu S Uzs Ejlg