Used Cormak Luft 700 Vsd+Pm Compact/ 500L Tank for sale (24,555)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Todpfx Ajycg Ryemrec Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings Todjychbaopfx Amroc In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. Todpsybvkaefx Amroc The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Tsdpfx Ameycctqjrsc Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Tsdsyguirepfx Amrjc Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, The CORMAK LUFT 2000 VSD+PM is an excellent choice for truck service workshops, tire service centers, and small manufacturing facilities. Despite its compact dimensions, it delivers an impressive 2,000 L/min actual air output, allowing multiple pneumatic tools to operate simultaneously. Its exceptionally low 74 dB noise level provides a much quieter and more comfortable working environment than conventional piston compressors. Built with premium-quality components, the compressor is designed for continuous-duty industrial operation. Compact Power for Your Business Powered by a 15 kW motor and delivering up to 2,000 L/min, the compressor provides a continuous supply of high-pressure compressed air required for: High-torque impact wrenches Heavy-duty pneumatic tools Truck tire inflation Industrial production equipment Continuous workshop operations Operating on a 400 V / 50 Hz power supply, the unit is engineered for continuous operation, making it ideal for workshops, tire service centers, manufacturing facilities, and various industrial applications. By replacing a conventional piston compressor with the LUFT 2000 VSD+PM, users benefit from significantly quieter operation, greater efficiency, and improved workplace comfort. Reliable Direct Drive System The LUFT 2000 VSD+PM features a proven direct-drive transmission system, eliminating vibration and removing the need for belt adjustment or replacement. Direct power transmission from the motor to the airend ensures: Maximum mechanical efficiency Tedpjzmgc Asfx Amrsc Reduced maintenance requirements Smooth and reliable operation Extended service life Maximum Working Pressure – 13 Bar The compressor delivers a maximum operating pressure of 13 bar, making it suitable for demanding industrial applications requiring higher air pressure. Operation is managed through the intuitive MAM electronic controller, providing real-time monitoring of key operating parameters, maintenance scheduling, diagnostics, and complete control over compressor performance. VSD Inverter Technology The integrated Variable Speed Drive (VSD) inverter continuously adjusts the compressor motor speed according to the actual compressed air demand. Compared with fixed-speed compressors, VSD technology offers: Significant energy savings Reduced electricity consumption Stable system pressure Lower mechanical wear Longer compressor lifetime Lower operating costs Because electric power represents up to 80% of the total lifetime operating cost of a compressor, VSD technology delivers a rapid return on investment. Premium Screw Airend High-performance CORMAK compressors such as the LUFT 2000 VSD+PM are equipped with technologically advanced screw airends that provide outstanding efficiency and long-term reliability. Technical Specifications Parameter Value Motor Power 15 kW / 20 HP Power Supply 400 V / 50 Hz Air Delivery (0–6 bar) 2,100 L/min Air Delivery at 6 bar 2,000 L/min Air Delivery at 8 bar 1,700 L/min Air Delivery at 10 bar 1,600 L/min Air Outlet Connection G 3/4" Dimensions (L × W × H) 1,080 × 750 × 1,000 mm Weight 400 kg

Condition: new, Year of construction: 2026, The presented model is an excellent choice for small workshops and manufacturing companies. Thanks to its high air delivery of 950 L/min in relation to its compact dimensions, it can efficiently power several pneumatic tools simultaneously. Its exceptionally low noise level of 68 dB ensures a comfortable working environment, even when the compressor is installed in the same room as operators. Built with premium-quality components, this compressor is designed for continuous operation and is perfectly suited for industrial applications. Energy Saver Series The Energy Saver line is an advanced range of screw compressors engineered to significantly reduce operating costs. Since energy consumption accounts for nearly 80% of the total cost of a compressed air system, these compressors have become the preferred choice for modern industrial facilities. Innovative Design Our compressors combine advanced engineering with European manufacturing precision. Their robust construction and high-quality components ensure reliable, long-lasting performance in demanding working conditions. Maximum Energy Efficiency Thanks to VSD (Variable Speed Drive) inverter technology and intelligent control algorithms, the LUFT 1000 VSD+PM automatically adjusts motor speed and energy consumption to the current compressed air demand. This results in substantial energy savings while maintaining maximum efficiency. Reliable Direct Drive System Todpfxezmf Auo Amroc The LUFT 1000 VSD+PM is equipped with a proven direct drive transmission, minimizing mechanical losses and reducing stress on both the airend and motor. This ensures high efficiency, lower maintenance requirements, and extended service life. Quiet Operation Designed with operator comfort in mind, CORMAK compressors feature highly effective sound insulation and vibration reduction systems, resulting in exceptionally quiet operation and a more comfortable workplace. Intelligent Electronic Controller The advanced MAM electronic controller provides intuitive operation and complete control over compressor performance. It enables continuous monitoring of operating parameters, maintenance scheduling, fault diagnostics, and protection of critical components. Flexible Configuration Every compressed air system has unique requirements. CORMAK compressors can be equipped with additional air treatment systems, allowing the machine to be configured to meet the specific needs of various industries. Dynamic Pressure Control Automatic pressure regulation ensures the compressor supplies exactly the amount of compressed air required at any given moment, maximizing energy efficiency while minimizing unnecessary power consumption. Sustainable Technology Our energy-efficient solutions help reduce operating costs while minimizing environmental impact, making CORMAK compressors both economical and environmentally responsible. Technical Specifications Parameter Value Motor Power 7.5 kW / 11 HP Power Supply 400 V / 50 Hz Air Delivery (0–6 bar) Average 990 L/min Air Delivery at 6 bar 990 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 950 L/min Air Outlet Connection G 1/2" Dimensions 900 × 600 × 1840 mm Weight 268 kg

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Tedsrh E Dqspfx Amrjc Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 270 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 270 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 270 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar Tjdsmqlprepfx Amroc ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Compressor dimensions 1320 × 650 × 945 mm Dimensions with tank 1495 × 1200 × 1545 mm Weight 350 kg

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Tsdpfx Ajxnk Acomrjc Manufacturer: CORMAK

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Todpfoxmg A Aex Amrjc Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced during normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Tsdoycf D Sopfx Amrec Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants from the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, functionality: fully functional, 230 V Screw Compressor CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in selling compressors have allowed us to develop models offering an excellent price-to-quality ratio. The presented model is ideally suited for small workshops and small manufacturing businesses. It offers a high output of 380 l/min in relation to its compact dimensions, allowing several devices to be operated simultaneously. The very low noise level of 60 dB ensures that working in the same room is comfortable and not disruptive. Thanks to the use of high-quality components, the compressor has been designed for continuous-duty operation and can also be used in industrial applications. THE SET INCLUDES: LUFT 400 screw compressor 150 L horizontal compressed air receiver Are you looking for an efficient and reliable compressor for smaller workshops, service centres or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the ideal solution. With a 3.0 kW motor and an impressive actual output of up to 400 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model, powered by 230 V / 50 Hz, has been designed for continuous-duty operation, making it ideal for demanding applications such as smaller workshops, tyre service centres and craft businesses. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 400 features a reliable and robust direct-drive system, eliminating vibrations and the need for belt-drive adjustment. This proven solution ensures stable operation and a long service life by providing direct power transmission from the motor to the screw compressor element. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 400 l/min ✅ Motor power: 3.0 kW ✅ Power supply: 230 V Technical Specifications Tjdpfx Amoza Al Usrsc Parameter Specification Motor power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Output at 0–6 bar Average 400 l/min Output at 6 bar 390 l/min Output at 8 bar 380 l/min Output at 10 bar 380 l/min Outlet connection diameter (G) 1/2" Dimensions 1130 × 520 × 1300 mm Weight 170 kg

Condition: new, Year of construction: 2026, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Todpfomqlm Tox Amrjc Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity. Tedpezwld Hjfx Amrec

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel with a working pressure of 16 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Pressure Vessel Professional pressure-rated construction – made of high-quality 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 16 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 16 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. Standard Equipment Connection ports: 6 pcs. Todjzwmlfepfx Amrsc G1/2" – 2 pcs. G2" – 2 pcs. G1 1/4" – 2 pcs. Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Tank capacity 500 L Maximum allowable pressure PS 16 bar Test pressure PT 22.88 bar Maximum allowable temperature TSmax 50°C Minimum allowable temperature TSmin -20°C Diameter 600 mm Height 2110 mm Weight 160 kg Connections 6 G1/2" connections 2 pcs. G2" connections 2 pcs. G1 1/4" connections 2 pcs.

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Tjdpfx Asmqlgujmroc Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, THEOR 20 INVERTER Screw Compressor with Refrigerated Air Dryer The set includes the THEOR 20 INVERTER screw compressor and the N20S refrigerated air dryer. The CORMAK THEOR series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK THEOR 20 COMPACT screw compressor with refrigerated air dryer and VSD inverter is an excellent choice. With a 15 kW motor and an impressive actual output of up to 2,100 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air, protecting the compressed air system against corrosion and damage. It is also equipped with a VSD inverter, which automatically adjusts the compressor's speed according to demand, helping to reduce electricity consumption. The THEOR 20 COMPACT oil-injected screw compressor with refrigerated air dryer and VSD inverter features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar Todpfx Amsmqlqdjrec ✅ Air output: up to 2,100 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 2,100 l/min Output at 6 bar 2,000 l/min Output at 8 bar 1,700 l/min Output at 10 bar 1,600 l/min Outlet connection diameter (G) G1" Dimensions 1550 × 740 × 1180 mm Weight 500 kg

Condition: good (used), Item: D-2414-Tank500 Tsdeh E Dp Uopfx Amrec Stainless Steel transport tank. Single skin, CIP connection Lid Ø 400 mm Dia. Ø950 mm Total H 1500 mm Outlet 2"

Condition: good (used), tank capacity: 14,500 l, total width: 2,150 mm, total height: 6,200 mm, Equipment: cooling unit, 14500l stainless steel tank with cooling Height: 6200 mm Diameter: 2150 mm Operating pressure: 0.0 bar internal, 1.0 bar cooling jacket Material: Stainless steel 1.4301 (AISI 304) Tedpjzzxhajfx Amrec Design: Cylindrical, upright, on a central plinth; DN 40 outlet; top manway; CIP with RLV line; 3 cooling zones Previous application: Beer 3 units available Each tank has been leak-tested A 12-month warranty is provided for each tank.

Condition: new, Year of construction: 2026, The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 200 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 200-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Todpfezwlpcox Amrsc Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: new, Year of construction: 2026, The CORMAK 150-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 150 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. Todpfx Aezwlm Uemrsc High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 150-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Tsdpfx Amoyccn Uerjc Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Spindle taper MK3 Minimum spindle speed 75 rpm Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Column diameter 150 mm Cube table size 250 × 250 × 250 mm Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg

Condition: like new (used), Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph Tjdpskl Hq Njfx Amrsc

Year of construction: 2003, condition: excellent (used), BCD Stainless Steel Process Tank Capacity 1500 |Ltr 316 Stainless Steel Todpfx Amsz E Inzorjc Bevelled bottom Drian with leaver closer