Used Complete Eps Production Line / Eps Block for sale (35,062)

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. Iodsz Alpmspfx Ap Hjbb The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM Ijdpfjz A Dxksx Ap Hobb • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Ibsdpfji Akrkjx Ap Hsb Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. The production line was only used in Germany and is in very good condition, having been regularly serviced. Iedpfx Apjz A R I Eo Hebb Negotiable price: 25,000 euros + VAT.

Condition: used, Complete Refrigerator Production Line – CANNON & NORTOOL (Sheet Metal, PU Foaming, Assembly, Charging & Packaging), used machine Fully integrated, high-capacity production line capable of manufacturing complete domestic and commercial refrigerators/freezers from raw sheet metal to final packaged products. Key Stations of the Production Line: - Sheet Metal Processing Station - Thermoforming (Vacuum Forming) Unit: CANNON FORMA vacuum forming machine (for ABS/HIPS inner liners and door liners). - Polyurethane (PU) Foaming Line: NORTOOL Oy cabinet and door foaming fixtures with high-pressure PU injection system. - Main Assembly Conveyor Line: Integrated assembly line for components, doors, and cooling circuits. - Evacuation & Gas Charging Station: High-vacuum pumping station and automatic refrigerant gas charging equipment. Ijdpfx Apozzkd To Hobb - End-of-Line Testing & Packaging: Electrical safety testing, leak detection, and automated packaging unit. Technical Details & Condition: Manufacturers: CANNON Group, NORTOOL Oy, and integrated custom machinery manufacturers. Condition: Used Inspection: Available upon prior arrangement

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Ibedpfx Apjxr Hgxj Hob Year: 2023, never used, still in its original packaging.

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Iodpfx Aszyyfkjp Hobb Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Ibodpfszm N Nrex Ap Heb Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm

Condition: excellent (used), Year of construction: 2018, Complete workshop, machinery for window production Conturex Weinig window production line Scm DMC sanding machine SY TM 1650 SCM Record 240 NT Weinig mortise and tenon press Laminated timber press Veneer press OMC Frame press Casolin Edge profiling machine SCM Painting system / spray booth Table saw Felder Table circular saw Felder Iedpfx Aezx Ti Hjp Hebb Double miter saw Stop tables Ruchser Mullion machine Stegherr Sanding machine Kundig Sanding machine Löwer Drilling machine Ganner Dust extraction system Mion Mosole and many other machines

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; Ibsdeucl Dcopfx Ap Hjb *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: ready for operation (used), A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. Ibsdpotnilhofx Ap Hob

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0266, year of last overhaul: 2026, workpiece weight (max.): 3,600 kg, power of the milling unit: 10,250 W, disc diameter: 200 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Isdjztyhrjpfx Ap Hebb

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6582018005, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Ibedpfx Apjztxv Us Hjb Detailed information about the machines is provided in the attached file.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Iedpsztxtaefx Ap Hobb

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz Ibjdpfx Aozrzk Ejp Hsb 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit Isdpfxsyw Tmls Ap Hobb 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), The line for gnocchi includes: - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters Ibedpfxjfwmt Uo Ap Hsb

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Complete Used Egg Tray Production Line (Molded Pulp) – 3,500 pcs/hour Complete used molded pulp production line for manufacturing egg trays and a wide range of molded fiber packaging. The line is in excellent working condition and is ready for immediate installation and production. Production capacity: Up to 3,500 pcs/hour (30-cell egg trays) Approx. 77,000 pcs/day Approx. 1,925,000 pcs/month The line can produce: 30-cell egg trays 20-cell and 20A egg trays Egg cartons for 6, 10, 12, 15 and 18 eggs (with corresponding molds) Fruit trays Bottle and cup carriers Shoe inserts Protective packaging for electronics and household appliances Medical trays Seedling pots Disposable tableware Other molded fiber packaging The complete production line includes: Hydropulper and complete pulp preparation system Rotary molding machine Vacuum system Air compressor and air receiver Multi-layer gas drying system with heat recovery Hot air circulation and exhaust system Final thermo-pressing machines Automatic labelling machines for egg cartons (6, 10, 12, 15 and 18 eggs) Electrical control system Mold sets Spare parts Complete technical documentation Advantages: Low power consumption Compact industrial design Reliable and proven technology Wide range of molded pulp products Fast installation and commissioning Suitable for both start-up production and capacity expansion Additional services: Installation and commissioning Personnel training Technical support during start-up Production optimization until full operating capacity is achieved The production line is available immediately and ready for shipment. Inspection is possible by appointment. Videos, additional photographs, technical specifications and documentation are available upon request. Ijdpfx Apszlbm Hj Hebb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading Iedpfx Ajy S E E Njp Hsbb

Year of construction: 2000, condition: used, Complete Production Line for Shoe Lasts Manufacturing We offer a complete technological production line for shoe lasts manufacturing — a fully integrated and coherent industrial system designed for reliable, continuous production. The entire line is maintained in very good technical condition. All machines are characterized by: High manufacturing quality Robust industrial construction Low wear level Long-term operational reliability Stable production performance This production system enables a continuous and optimized workflow — from raw material preparation, through semi-finished components, to final machining and assembly processes. The line represents a complete and proven industrial process, ready for immediate operation in manufacturing conditions. European Industrial Quality All equipment originates from renowned Italian manufacturers, including: ARBO Oleodinamica Donzelli Gruppo San Rocco Meber These manufacturers are recognized for: Precision engineering Durability Industrial-grade performance Proven European manufacturing standards LINE STRUCTURE 1. Raw Material Preparation Section 1.1 Granulation Machine 1.2 Material Mixer Isdoza Ak Rjpfx Ap Hebb 2. Semi-Finished Production Section 2.1 Injection Molding Machine (for blanks) 2.2 Standardization Unit 3. Pre-Machining Section 3.1 Last Cutting Saw 3.2 Pre-Copy Milling Machines (2 units) 3.3 Finishing Copy Milling Machines (2 units) 4. Special Machining Section 4.1 V-Cut Milling Machine 4.2 V-Cut Saw 4.3 French Cut Saw 4.4 French Cut Milling Machine 4.5 Chain Milling Machine for Locks 4.6 Pin Insertion Machine for Locks 5. Drilling, Machining & Assembly Section 5.1 Bushing Drilling Machine 5.2 Bushing Installation Machine 5.3 Multi-Spindle Drilling Machine for Pins 5.4 Last Plate Cutting Machine 5.5 Punching Machine 5.6 Secondary Punching Machine 5.7 Steel Processing Machine 5.8 Plate Forming Machine 5.9 Automatic Trimming Machine 5.10 Last Assembly Tool 6. Finishing Section 6.1 Toe Trimming Machine 6.2 Heel Trimming Machine 6.3 Grinding Machines (2 units) 6.4 Cleaning Machines (2 units) 7. Recycling & Waste Management System 7.1 Chip Grinding Machine 7.2 Industrial Dust Extraction System 8. Tooling Section 8.1 Knife Sharpening Machine

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: Iodpfexhgl Tjx Ap Hjbb The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line - 1 x welder VSM40/26 - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table Ijdpfx Asvkdubjp Hjbb - 1 x 2 head corner cleaner with drilling head's - 1 x outfeed table adjusted for Rehau Brillant/Euro70, Synego and Geneo the line is still in production, can be inspected in working conditions fully functional, very good conditions

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Complete automatic URBAN welding and cleaning line for PVC windows and doors profiles. System consisting of 2 paralel welding machines: 1 four-head welding units of AKS 6410 27/25, 1 six-head welding units of AKS 6610 27/25, 1 automatic unloading and transfer bench TBA-F 26/28-TE 9M, 2 automatic transport bench TBA-F 26/28H to 1 automatic four-head cleaning unit SV 800/2.5M and 1 final TBA bench. Set of jaws for Komerling Profine profiles. Sold due to company closure. Ibodpoyundrjfx Ap Heb

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. Isdpfx Apeywkc Rs Hjbb 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment. Ibsdpfxsq Nxrxs Ap Hsb