Used Cnc Bench Drilling Machine for sale (67,596)

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Credpet H Twysfx Albeg

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm Crodpfxezff A Ej Albeg B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer Csdpfju Tln Njx Albjrg - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm Crjdpfowcldasx Albeg max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances Crsdpfxoy R N Ile Albjg * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Csdpfx Asznuxbjlbjrg Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Csdsy Edqqspfx Alborg Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Crsdpfozmuntsx Albjg Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Csdpfxoyvuh Ij Alborg Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries Codpfezuw Ixex Albjrg - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Year of construction: 1970, condition: good (used), Type / Model: BST 13 Cedpfx Alefir T Usberg Machine number: 37749 Drilling capacity: 13 mm Spindle mounting: MK 2 Speed range: 475 to 2,400 rpm Overhang: 190 mm Table: 230 x 220 mm Clamping area: 165 x 170 mm Height adjustment: 300 mm Stroke: 100 mm Total power consumption: 0.45 kW Accessories / Equipment: Multi-spindle drilling head (4-fold) presumably Sigloch & Schrieder Condition: good Footprint: 220 x 400 mm Weight: 80 kg Dimensions: 220 x 400 x 820 mm

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point Crjdpfxozvduuj Albeg - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping system - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine - central oil lubrication system Vogel Cjdoh Ic Ufjpfx Albsrg - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China. Crodpfx Alsxf Ikrebeg

Year of construction: 1987, condition: used, X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible. Crodpszwfq Tefx Albjg

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port Credpfjzuxdbox Albjg - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Year of construction: 1995, condition: ready for operation (used), 4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2100mm/1450mm/1800mm. 3) One CNC vertical PCB drilling and routing machine, Lenz GX 600-1, year of manufacture: 1991, travel X/Y: approx. 650mm/600mm, number of spindles: 1, rapid traverse X/Y: approx. 15m/min, spindle: Precise SC63, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2000mm/1500mm/1800mm. 4) One compact CNC vertical PCB drilling and routing machine, Lenz TB 500-1, travel X/Y: approx. 475mm/390mm, number of spindles: 1, rapid traverse X/Y: approx. 10m/min, spindle speed: approx. 15000rpm, tool holder: 3mm, control: SIEB & MEYER CNC 35.00. Equipped with a cooling unit and a spare control unit, overall dimensions X/Y/Z: approx. 1500mm/1100mm/1520mm. The machines can be purchased individually or as a package. Inspection possible by appointment. Codpfxoznmy Do Albjrg

Condition: used, Vitap's smart solution for through-hole drilling and grooving with automatic return to the operator. Three controlled axes: - X-axis – continuous workpiece transport via a patented belt system. - Y-axis – drilling head movement, guided by rack and pinion. - Z-axis – drilling, guided by ball screw. The fewer limitations, the greater the progress! With our machine, we do not impose any limits on workpiece length. Simple TPA programming: - You can position the holes individually. - The machining operations are displayed on a virtual workpiece. - If the workpiece dimensions change, the holes can be automatically adjusted. Office software license – Power lies in tranquility. - Perhaps you have better ideas in a quieter environment? This allows you to make better use of the flexible CAD system. - With this license, you can write programs where they are developed and discussed, in the office. Color LCD TFT 19" 5/4 screen USB port for loading programs from any office workstation 3 password-protected access levels (operator, supervisor, assistance) Technical data: - 9 vertical spindles, individually controllable - 2+2 horizontal drilling spindles in X - 1+1 horizontal drilling spindles in Y - 1 grooving saw unit (saw blade diameter 100 mm) - Max. workpiece thickness 50 mm - Max. workpiece weight 50 kg - Max. workpiece size: X unlimited, Y 920 mm, Z 50 mm Credpfezutqijx Albjg - Min. workpiece size: X 270 mm, Y 150 mm, Z 10 mm - Workpiece transport speed: 25 m/min - Spindle speed 3,600 rpm - Max. horizontal drilling depth, X and Y axes 30 mm - Max. vertical drilling depth 45 mm - Max. vertical tool diameter 35 mm - Max. horizontal tool diameter 12 mm - Motor power 1.7 kW - CE standard

Condition: good (used), Storage location: 3132 Manufacturer: WMW Machine number: 1984 Type / Model: BT 2 Drilling capacity: up to 16 mm Spindle mount: Drill chuck Speed range: 355 / 710 / 1,400 / 2,800 rpm Stroke: 100 mm Overhang: 210 mm Table: 340 x 470 mm Head adjustment: 120 mm Total power consumption: 1.1 kW Accessories / Equipment: Drill chuck Condition: very good Crsdpfx Alezx Rtpjbeg Weight: 165 kg Dimensions: 480 x 550 x 1,150 mm

Condition: used, machine/vehicle number: 007842, X axis working area: 5000 mm Credpfx Ajyhbiuolbog Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of drilling spindles: 14 Total number of tool changer positions: 18

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: Crjdpjd Ingfsfx Albsg - Drilling capacity approx. 30 mm - Drill spindle mount MK 3 - Drill spindle speeds in 2 stages, stepless 80 - 1400 rpm - Table surface 390 x 420 mm - Drilling unit height-adjustable by hand crank - Min. / max. distance table / drill spindle 220 / 580 mm - Drill spindle stroke 150 mm - Drill spindle overhang 280 mm - Drive 400 V / 1.3 / 2.3 kW - Space requirement approx. W 480 x H 880 - H 1200 x D 1050 mm - Weight approx. 250 kg - Table base with storage space W 600 x H 910 x D 800 mm - Weight 200 kg

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Cedpfxozrybps Alborg Technical data: - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Csdpoylbrqofx Alborg

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 Csdshmmfkopfx Albsrg - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Credpfx Asw D Evlelbjg