Used Clean Room for sale (7,437)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Codpfx Aloq H H Rusbshb Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Chodpezgcy Defx Albsb Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Chsdspcgy Repfx Albeb

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W Chedpezuy Stsfx Albsb • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus Chedpezuy Insfx Albsb • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Cleanrooms & FFU controllers – available immediately, at attractive prices! Are you looking for a professional cleanroom solution? Then you’ve come to the right place! We offer high-quality cleanroom systems and control technology directly from our own stock – without long delivery times, at fair prices. Filter Fan Unit (FFU) controllers – grab them now! ✔ 10 units available immediately ✔ Including digital control unit ✔ New – €1,000 per unit Chsdpsrlm Rvefx Albob Your cleanroom – tailored to your dimensions, according to your requirements We plan, deliver, and build your cleanroom – completely according to your wishes. Our modular wall elements enable flexible room concepts with glazing and integrated ventilation technology. The quality of our work can be seen in the photos – a successfully completed project for a customer in the Netherlands. Unbeatable value for money: Starting from just €500-€750 per m² of floor space – including glazing, for a room height of 2,500 mm. Example: A cleanroom measuring 4 m × 4 m costs you from €8,000 net – ready for use and built according to your specifications. Contact us today! We will quickly and easily create a customized offer for you – for any size. Your team at Impuls Engineering GmbH

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Shows slight signs of wear (see pictures) Codpfx Alewm Il Ujbohb

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Chjdpfx Alezl Slysbjb Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! Codozx S E Hepfx Albshb TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum Chedpfxog Tm N Ao Albob - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition.

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Cjdpfshm E S Aex Albshb Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Model: IRB4600 Year of manufacture: 2017 System consists of: ABB robot IRB4600 Control cabinet Handheld control unit Laser cleaning unit Clean Laser type intelliScan30 Extraction system TEKA Chodpewrcn Uofx Albeb 11526ä

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 8040, working width: 2,700 mm, input voltage: 415 V, type of input current: three-phase, input frequency: 50 Hz, The device was purchased together with the Spraybotic painting booth, but due to lack of space, it was never put into operation by us. Csdpfx Alszyr Rrsbjhb

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Chedpfxsun R N As Albsb Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: excellent (used), I'm selling a lightly used spray washer from the Danish company Compact, model 1000-H. The machine is ready to work without leaks. We can work on site or send a video. The raised version, which is standard 70 cm high, is 100 cm above the basket. The version is made entirely of stainless steel and is additionally insulated. It sprays from the bottom, top, and side. Adjustable operating time and temperature. The basket diameter is 100 cm. The tank holds 330 liters. It weighs 800 kg. It has a 500 kg load. It has a steam extraction fan. Possible transport within the EU Chsdpfxjzqd Tye Albob

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen Chsdpfx Aljzxwz Tjbeb

Condition: used, Floor cleaners, floor preparation products, floor coating Chodpfeqyi Unjx Albsb -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Cedpfx Ajzdqv Ujlbohb Stock number - 1145

Condition: like new (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 105-337, Machine for cleaning the corners of PVC profiles. Csdozdqagspfx Albshb

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Chedpfx Ajzx Eftelbsb Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Chedjzx Ep Sepfx Albsb Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 2022, Extraction connection, D 140mm Chip collector capacity 200L Airflow rate [m³/h] 2500 3 kW, 400V Chedpfx Aezxql Eolbeb

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. Csdpfx Alozwmfrsbohb It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, power: 200 kW (271.92 HP), laser hours: 200 h, compressed air connection: 5 bar, laser power: 200 W, laser wavelength: 1,064 nm, type of cooling: water, laser type: fiber laser, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Chodpfxszlrzze Albeb

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition Chsdpozlnmmefx Albob For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.