Used Claas Hay Technology for sale (25,014)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, working width: 2,750 mm, color: red, overall weight: 398 kg, total height: 1,000 mm, total width: 3,000 mm, machine/vehicle number: EFA00914, Hooikneuzer - stroschudder in quasi nieuwstaat - weinig gebruikt tot juli 2026 en verkoop wegens aankoop combi maaier/kneuzer. Blodpfxjzq S Dts Amysk Altijd droog weggeborgen en netjes gereinigd en gesmeerd. Regelbaar wiel voor diepte van de veertanden. Regelbare kneuzing in 4 standen. Zeer zeldzaam te vinden in tweedehandse staat, zeker niet in deze zeer goede staat. Alles top, banden, veertanden, bewegende delen, draagraam, ...

Condition: used, Year of construction: 2026, Working width: 6.40 meters Width in working position: 6.75 meters Number of rotors: 6 Number of tine arms per rotor: 6 Transport width: 2.95 meters Transport height: 3.30 meters Turning at the field edge: by manually adjusting the angle of the wheels Blsdpfjzdmt Njx Amysk Grass deflectors above the tine revolutions Fixed spreading angle adjustment Rotor drive via DIGIDRIVE finger clutch made of forged, case-hardened steel PTO speed: 540 rpm Balloon tires 15x6.00-6 Outer rotors hydraulically folded up for transport Three-point linkage, Category 2 Swivel head trailing device Mechanical vibration damper 1 single-acting hydraulic cylinder Power requirement at the PTO: 22 kW/30 hp Weight: approx. 850 kg Location: 54595 Prüm

Condition: used, Year of construction: 2009, Claas Liner 1650 Twin machine, ready for operation. Bsdpfx Amezp Angjyjlk 6-wheel chassis. Price: 7,900.00 Euro net. Location: null

Condition: used, Year of construction: 2020, Working width: 8.40 - 12.50 m Average swath width: 1.40 - 2.40 m Transport width: 3.00 m Transport length: 9.95 m Transport height: 3.95 m 1 central swath Number of rotors: 4 Rotor diameter: 3.20 m Blodsv H Rw Uopfx Amyjk Number of tine arms per rotor: 11 on the front rotor, 12 on the rear rotor / 4 double tines per tine arm Sealed, maintenance-free MASTERDRIVE GIII gearbox 3D pendulum suspension 4 swivel wheels per rotor Price: 38,500.00 Euro net Location: Prüm

Condition: used, Year of construction: 2021, _____Fendt 4-rotor hay tedder, model 12545 Year of manufacture: 2021 Mechanical operation No Isobus Low operating hours Immediately ready for use Blsdpfx Ajzknxtjmyjk Price: 29,000.00 Euro (net) 34,510.00 Euro (including 19% VAT) Location: null

Condition: new, Year of construction: 2026, _____Mounting category I + II Working width approx. 5.80 - 6.60 m Swath width approx. 1.20 - 1.80 m Transport width approx. 2.75 m Transport height approx. 3.70 m (with tine arms mounted) Transport height approx. 3.18 m (with tine arms dismounted) Bledpfx Aezgqrbemysk Transport length approx. 4.66 m Rotor diameter 2.74 m Tine arms per rotor 10/10 Double tines per arm 4 Tire size, rotor chassis 3 x 16/6.50-8 Tire size, transport chassis 10.0/75 - 15.3 Power requirement approx. 19 kW / 26 hp Required hydraulic connections 1 x single-acting Rotor height adjustment mechanical PTO speed rpm 540 Standard PTO shaft included PTO shaft profile 1 3/8", 6-piece Freewheel in the secondary drive included Warning signs included Lighting included Weight approx. 1350 kg Optional equipment: - Individual lifting, electric preselection - Tandem axle with wheels 16/6.50-8 Internal number 14394 Net price: 17,900.00 EUR Gross price: 21,301.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Category I+II mounting Working width approx. 6.60 m Transport width approx. 2.90 m Height in transport position approx. 3.30 m Number of rotors 6 Number of tines per rotor 6 Tine loss protection standard Tire size 16/6.50-8 Power requirement approx. 30 kW / 41 hp Required hydraulic control valves 1x single-acting PTO speed rpm 540 PTO shaft with overload protection (star ratchet) PTO shaft profile 1 3/8", 6-piece Warning signs standard Lighting optional accessory Weight approx. 822 kg Special equipment: Blsdpfxozgqq Do Amysk - Lighting with LED Internal number 14392 Net price: 10,300.00 EUR Gross price: 12,257.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Mounting category I+II Working width approx. 3.85 m Swath width approx. 0.70 - 1.55 m Transport width approx. (with tine bars removed) 1.68 m Transport length approx. 2.34 m Rotor diameter 2.96 Number of tine arms per rotor: 10 Number of double tines per arm: 4 Tire size for rotor chassis: 2x 16/6.50-8 Bodpfx Amezgqq Reyelk Tandem axle Optional accessories Power requirement approx. kW/hp 20/27 Required hydraulic connections: - Height adjustment of rotor: mechanical PTO speed: 540 rpm PTO shaft Overload protection (star ratchet) PTO shaft profile: 1 3/8", 6-piece Warning signs: optional accessory Lighting: optional accessory Weight approx. 520 kg Special equipment: - Set of warning signs with LED lighting - 1 set of tandem axles with 16/6.50-8 wheels Internal number: 14393 Net price: 6,900.00 EUR Gross price: 8,211.00 EUR Location: null

Condition: used, Year of construction: 2026, _____Technical data: Working width: 7.70 - 8.60 meters Average swath width: 1.40 - 2.30 meters Transport width: 2.99 meters Transport length: 6.57 meters Transport height: 3.99 meters with mounted tine arms 1 central swath Number of rotors: 2 Rotor diameter: 3.65 meters Number of tine arms per rotor: 13 Number of double tines per tine arm: 4 Tine arms: not detachable Gearbox type: closed, maintenance-free MASTERDRIVE GIII gearbox Ground adaptation: 3D pendulum suspension Number of wheels per rotor: 4 Tine height adjustment: via hand crank (hydraulic adjustment as optional equipment) Rotor tires: Super balloon tires 16x6.50-8 Steered chassis Rotor drive: mechanical rotor drive with integrated freewheel PTO speed: 540 Mounting: trailed, three-point hitch, Cat. 2 and 3 Power requirement at the PTO: 50 kW / 68 hp Required hydraulic connections on the tractor: 1 single-acting and 1 double-acting control valve, 1 free return line (if machine is ordered with a Bieden console KGA 11C or optional equipment: individual rotor lift) Required electrical connections on the tractor: 1 seven-pin electrical connector and 1 three-pin ISO electrical connector Lighting system Weight: 2,250 kg Image is for example purposes; new machine, location: null Bsdpfx Amjzdmtioyelk

Condition: new, Year of construction: 2024, he shredder is designed for shredding straw or hay pressed in rolls. In certain cases, after obtaining the manufacturer’s permit or testing, it is possible to shred square or rectangular pressed bundles. Required fraction of the shredded product at the output is possible after selecting a sieve of a certain throughput from the range offered by the manufacturer. In case product fractions of a smaller size are needed, insert a finer sieve, and vice versa. Technical Data of Shredder Blsdpfxotnfuzo Amyek Capacity: 500 – 1200 kg/h Shredding fraction: 10 – 35 mm Humidity of raw material:

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Crumbler HB KRU 6 Length and diameter of crumb roll: 1740 x Ø 250 mm Engine: 7.5 and 11 kW Weight: 2100kg Bsdpora Dn Sofx Amyslk

Year of construction: 2026, operating hours: 1 h, condition: new, We are offering this new Wenzhou Yingxing technology SMT220 pick and place machine, manufactured in 2026. It comes complete with 10 x 8mm feeders, 3 x 12mm feeders, 2 x 16mm feeders, and a YX3040 stencil printer. Includes monitor, keyboard, mouse, and all software. Everything is brand new. Bjdszq Sk Hspfx Amyolk Machine type: Pick-and-place machine Model: SMT220 Power: 400 W Input voltage: AC220 V - 110 V Frequency: 50 Hz Weight: 76 kg Date of manufacture: 26.1 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2007, total height: 2,450 mm, travel distance X-axis: 3,090 mm, travel distance Y-axis: 1,540 mm, overall weight: 8,400 kg, table width: 3,000 mm, table length: 1,500 mm, controller manufacturer: FANUC, controller model: FANUC 16I-PB, This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Additional equipment • Integrated Auto-Index system • Automatic tool change system with 15 stations • Waste extraction system at the die • Pedal for opening/closing sheet clamps • Pedal for single punching operation • Automatic collision prevention for tilting parts and cutouts • Interactive CAD with export function • Import of CAD drawings in common formats • Interactive nesting (freehand, bump nesting) • Automatic positioning of special tools Machine Benefits Qualitative Machine Benefits • Maximum punching diameter with technology tools: 100 mm • Maximum punching diameter with trumpf tools: 80 mm • Maximum punching and nibbling thickness: 6 mm • Automatic tool sharpening recovery: 10 mm Bsdezn Hk Nepfx Amyslk • Tool change time: 4 seconds • Automatic sheet metal processing, including residual grid destruction Technical Machine Benefits • Workpiece repositioning: automatic • C-frame structure: c-frame (schwanenhals) • Operating manuals included • Technical support available • Processable sheets with automatic repositioning: 1500 x 6000 mm • Steel and ball plates for sheet metal support • Front horizontal plane for sheet metal unloading • Number of stored stations: 15 • Number of rotating stations: 15 Extra Information Machine still under power Dimensions Machine Depth 6190 mm

Condition: used, Year of construction: 2017, Operational condition SPI machine. Ask for specification! Bodpfx Amow Ty Rbeyslk

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Ask for specification! Blodpfxow Ty Hcj Amyjk

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Bsdpfswmm U Usx Amyelk

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Bedpowhbnlofx Amyjlk

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For industrial sale, a fully automated saw for cutting lumber packages and structural elements – a complete technological line for formatting packages to a specified length. The device is designed for use in sawmills and wooden structure manufacturing plants, where process efficiency, consistent cutting length, and package stabilization during cutting are crucial. Inspection and testing are possible at Delfina 20, 98-354 Siemkowice, POLAND. Blodsxn Rt Uepfx Amyek Operating parameters: • Max. package: 1300 × 1300 mm (width / height) • Max. input package length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. package weight: 8000 kg • Cutting accuracy: ±2 mm The minimum package cross-section is determined by the extreme position of the hydraulic clamps – cutting packages with smaller dimensions is permissible. Cutting module: • Main motor 11 kW • HIWIN linear guides with increased load capacity • GB TITANIUM guide + STIHL chain • Automatic guide lubrication system The rigid construction of the unit ensures stable operation and consistent cutting length. Package stabilization: • System of 6 hydraulic clamps (top + side + front and behind the cutting line) • Package support on vertical rollers • Elimination of package movement during saw entry Process automation: • Intelligent package strapping system • Automatic determination of strapping locations • Option for automatic initial cutting • Buffer for cut packages Transport and handling: • Transverse loading conveyor • Transverse unloading conveyor • Automatic package pickup after cutting Waste removal: • Belt conveyor for waste (~10 m) • Hydraulic tilting rollers of the cutting module (protection against large waste jamming) Automation: • Siemens PLC controller • Yaskawa servo drive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package – heating of the control system • Transport to the customer – included in the price • Installation – included in the price • Commissioning – included in the price • Operator training – included in the price

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: LM0120032, MACHINE FOR CUTTING IRREGULAR SHAPED STONES CONTINUOUS OPERATION – MATERIALS THAT CAN BE PROCESSED: STONE AND MARBLE. Blodpezn Uvyefx Amysk

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Bledpfx Ajy Taixemyek Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: like new (used), Year of construction: 2023, operating hours: 111 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 4,000 kg, The PS1600 was designed for shredding pallets into high-quality wood chips. - Recycling of pallets into high-quality wood chips - Significant space saving by eliminating the need for disposal sites - No disposal costs Bljdpszntu Usfx Amyok - Simple and safe operation Details Technical data Machine type: PS1600 Operating hours: 111 h Year of manufacture: 03/2023 Cutting unit opening: 284 x 1,588 mm Drive description: Belt drive with a 2-stage gearbox and elastomer damper Drive power: 22 kW Rotor speed: 53 rpm Energy efficiency class: IE3 Voltage / frequency: 400 V / 50 Hz Cutting system: Rotor Feed table with infeed belt and infeed roller Speed control of the infeed rollers Design: Smooth Rotor diameter: 300 mm Number of knife rows: 1 Number of cutting tools: 43 Perforated screen: 70 x 40 mm with chip breaker Color / paint Machine: Gray Covers: Gold yellow Control cabinet Control: Siemens LOGO control Color: Light gray Dimensions and weight Machine dimensions: l x w x h 4660 x 2320 x 2030 mm Total weight: 4 t Accessories Discharge screw: 3000 mm Trough chain conveyor 45°: 4000 mm Downpipe: 1000 mm Light barrier in the chip area OPTIONAL on request: Magnetic separator

Condition: used, Year of construction: 2016, For Sale: Bjdpfxozlt S Ij Amyelk Complete TU premix bunker installation with accessories. Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. The installation can be viewed on-site.

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 Bsdsznpagepfx Amyelk ID no 12320594/1 Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 930 h, fuel type: diesel, maximum speed: 40 km/h, color: green, For Sale: Claas Arion 610 Hexashift Stage V (CIS) Agricultural Tractor, Type A96 100 Year of manufacture: 2022 Operating hours: 939 hours The tractor is in excellent, like-new condition, has seen very little use, is fully operational, and is ready to work with no additional investment required. It is powered by a 6-cylinder John Deere DPS 6.8 L engine compliant with Stage V emissions standards (SCR, DPF, DOC, AdBlue). Maximum power: 145 HP Rated power: 135 HP Homologated power: 139 HP The tractor is equipped with a Hexashift 24/24 transmission (without creeper gears), featuring an electro-hydraulic shuttle and automatic powershift gear changes. Maximum speed is 40 km/h. It has 4WD, a differential lock, and a PROACTIV suspended front axle. The Load Sensing hydraulic system delivers 110 l/min and includes four rear hydraulic remotes (2 mechanical, 2 electro-hydraulic). Rear Category III three-point linkage and PTO speeds: 540 / 540 ECO / 1000 / 1000 ECO. The tractor does not have a front PTO. It is fitted with a Claas front linkage (front hitch) with a 3.0-ton lifting capacity and suspension. A reinforced loader frame is installed. The tractor comes with an ALO Quicke Q6M front loader featuring suspension, a quick coupler, Euro hitch, a bucket, and pallet forks. The cab is suspended and equipped with air conditioning, a pneumatic driver's seat, a CIS terminal with a color display, Bluetooth radio with hands-free function, and a full set of work lights. Standard roof (without sunroof). Tyres: Front: 480/70 R28 Mitas Rear: 580/70 R38 Mitas Both front and rear tyres are in very good condition. Bsdozmv Twepfx Amyjlk The tractor can be inspected and collected in Germany by prior appointment.

Condition: new, Year of construction: 2025, Turbo mill MTR-800 This turbo mill is designed for grinding, crushing, and granulating materials to improve the quality of final separation in subsequent recycling processes. Technical data: - Installed power – 75kW or 90kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. - Number of abrasive counterknives – 18 pcs. - Structure mounted on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening via a manual hydraulic pump - Engine base with a rocker-type tensioner - Weight – approx. 1950kg Bedov I S Ukepfx Amyslk - Discharge ends with an orifice of fi-150 - Electrical installation with inverter included in the price.