Used Carlo Salvi 1 Die 2 Blow for sale (107,850)

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Bjdehrdmxspfx Amreln Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, One Die Two Blows Capacity (mm): 14x200 Blsdpfeulf D Nex Amren Production (max): 75 ppm 70's

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Bsdpfxozma Tbj Amrjln Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 28727, Diameter max: 6 mm Blsdpfx Amsthgkqsren Length under head max: 30 mm Speed: 400 ppm

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System Bodpfoh N Di Dex Amrjln - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 24625, COLD HEADER CARLO SALVI 246/TR 2 Die 4 Blow Max. Cutoff Diameter: 8 mm Max. Cutoff Lenght: 75mm Bljdpfxohn R E Ie Amrsn Max. K.O. Lenght First Die: 85 mm Max. K.O. Lenght Second Die: 60 mm Max. K.O. Lenght (Punch Side): 10 mm

Year of construction: 1996, condition: excellent (used), TRANSFER HEADERS CARLO SALVI 246/TR 2 DIE 4 BLOW Used in excellent condition with monitoring system. Fully functional, operational. Possibility of having the machine with total overhaul and closed cut. Number of dies: 2 Number of punches: 4 Max cutoff tonnage: kg. 2.200 Max cutoff diameter: 8 mm. Max cutoff length: 75 mm. Max k.o. length first die: 85 mm. Max k.o. length second die: 60 mm. Heading tonnage: kg. 26.000 Max k.o. length (punch side): 10 mm. Blsdpsp Am Ucofx Amrsn Max. speed: 250 pcs./minute Available c/o HBR srl - Calolziocorte (LC)

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08U/9110, Offer Number: M08U/9110 Blsdpfx Aezzw Sdemrsn Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Outside of Europe

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 Blsdpsh Rkhnefx Amron PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg Bodpfx Amjxnkdgjrjln overall dimensions 4.2x2.3x1.85 m

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/8327, Offer Number: M08L/8327 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1989 diameter range: 3-8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm Bljdpfxswi S Ape Amrjn output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Blsdezwa Rbepfx Amron Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Bodpfx Aezu S U Hsmroln Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: M08L/9038, Offer Number: M08L/9038 Machinetype: 6 die - 6 blow transfer header Bledpfsw N Dmfjx Amrsn Info: bushing cut-off Make: Carlo Salvi Type: 663/TR Constr. year: 1994 diameter range: 5 mm number of dies: 6 number of stations (incl. cut off): 7 cutting length: 35 mm shaft length under head: 25 mm output - pieces/min: 400 press power: 15 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Bedpowi S Aiefx Amreln Type: RH60 Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: reconditioned (used), Year of construction: 2026, CARLO SALVI DL 560 RF Refurbished like new Closed cutoff New mechanical parts New electrical system CE compl. with Inverter, PLC and remote assistance Supplied with conveyor belt and control process Brankamp Full revised by H.B.R. srl Technical details: Blodpjy Rzgaofx Amrsn Number of dies: 1 Number of punches: 2 Diam. raw material min/max: 2 - 5 mm. Max length under the head: 60 mm. Max length cutoff: 75 mm. Hole depth: DIN 7338B Diam. head max.: 10 mm. Speed max: 440 pz./min. Forza max. taglio: 1.500 daN Forza max. di stampaggio: 11.000 daN Peso netto macchina: 6.000 kg. Potenza motore: 9 Kw Occasione da non perdere! Come on in HBR to look the machinery! Visit our Company!

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M06L/8006, Offer Number: M06L/8006 Machinetype: double blow header Make: Carlo Salvi Type: 476SV Constr. year: 1980 diameter range: 2-4,76 mm shaft length under head: 46 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse Bodpfxjwi Scps Amreln

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M20I/9028, Offer Number: M20I/9028 Machinetype: rivet header Bljdpfx Amowzkydoren Make: Carlo Salvi Type: RF/GL Constr. year: 1972 diameter range: 5-8 mm shaft length under head: 60 mm max. cut-off length: 90 mm output pieces/min: 200 Location: Germany

Condition: refurbished (used), Year of construction: 2023, COLD FORMING CARLO SALVI 550/SV Completely Refurbished by HBR srl Possibility of having the version RF (with semitubular group). Blsdpfx Amoqhndmjron Machine with quick change system on K.O. cams. Range production: min. and max. wire diam.: 2 - 4,76 mm. max. cutoff length: 65 mm. max shank length: 50 mm. max production per min: 500 Motor Power: HP 7,5

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm Bljdox Edtcepfx Amren cutting length: 87 mm output pieces/min: 360 Location: In our warehouse

Condition: good (used), 9 pieces, each with a circuit board Removed from an Arburg 420 C Selogica 100 EUR per piece Bledjzdktgepfx Amren 600 EUR for the entire set

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M08I/8941, Offer Number: M08I/8941 Machinetype: 2 die - 2 blow transfer header Make: SACMA Type: SP22 Constr. year: 1976 Bedpfxewi Td Is Amrjln diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 3 cutting length: 110 mm shaft length under head: 100 mm output - pieces/min: 170 Location: Germany

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 diameter range: 8-16 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 160 mm Bjdpfx Aowi Tavjmrjln shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 2007, functionality: fully functional, Tetra Pak Pressvatic 1+2 – Pre-Press & Block Format System Manufacturer: Tetra Pak Model: Pressvatic 1+2 Machine Type: Cheese Pre-Press & Block Formatting System Application: Industrial Cheese Production Capacity: Approx. 1.8 tonnes/hour Condition: Used Location: Ireland Description: Tetra Pak Pressvatic 1+2 pre-press and block-format system designed for integration into high-volume industrial cheese production lines. The Pressvatic performs the preparation and pre-pressing of cheese curd prior to forming and cutting the cheese into production blocks. It is designed to provide controlled curd distribution, whey drainage, pre-pressing and block formatting as part of an automated cheese manufacturing process. The system is particularly suited to production of granular and round-eyed cheeses and can be integrated with upstream cheese vats and curd-handling equipment and downstream main presses. Key Features: Blsdpjzy Rxhefx Amrjn - Tetra Pak Pressvatic 1+2 system - Automatic pre-pressing and block formatting - Approx. 1.8 tonnes/hour capacity - Designed for industrial cheese production - Automated curd distribution - Whey drainage system - Pneumatic pre-pressing - Cheese block forming and cutting - Stainless-steel food-processing construction - Designed for integration into automated cheese production lines - CIP-compatible hygienic design - Suitable for continuous industrial cheese manufacturing operations - Cheese Applications Suitable for production of a range of cheeses including: Gouda Edam Havarti Swiss-type cheeses Other granular and round-eyed cheeses Tetra Pak Pressvatic, Tetra Pak Pressvatic 1+2, Pressvatic 1+2, Tetra Pak cheese equipment, Tetra Pak cheese press, cheese pre press, cheese pre-press, cheese block former, cheese block formatting machine, cheese block forming machine, cheese production equipment, cheese pressing equipment, dairy processing equipment, cheese manufacturing equipment, industrial cheese equipment, used cheese machinery, used dairy equipment, Tetra Pak dairy equipment, 1.8 tonne cheese press, cheese production line, Gouda cheese equipment, Edam cheese equipment, Havarti cheese equipment, Ireland, Europe

Condition: refurbished (used), Year of construction: 2023, TRANSFER HEADERS SACMA SP22 2 DIE 2 BLOW Completely overhauled - Like new semi-tubular group installed Bjdpjpgw Ugofx Amrjln Diam. 10x100 mm. Machinetype: 2 die – 2 blow transfer header Diameter range: 10 mm. Number of dies: 2 Number of stations (incl. cut off): 3 Cutting length: 110 mm. Shaft length under head: 100 mm. Output – pieces/min: 170