Used Camam Multiple Boring Machine for sale (65,554)

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths 2 Aluminium fences 2 x 1500mm 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Hodpfx Aoiu Urpomyor Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Available immediately. Hjdpfetmwniox Amyor

Condition: used, Year of construction: 1996, functionality: fully functional, SECOND-HAND MULTIPLE BORING MACHINE CAMAM MOD. FMV/4U - 4 BORING UNITS - N. 4 independent boring units Hedsx N S Tbopfx Amyjr - Control panel - Year 1996 - CE rules

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Hedpfx Amoznkpvjysr Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Hodpfxsif Az Uj Amyor Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 1996, Siemens 840-D SL, approximately 2012 Table: 2200 x 2250 mm Distance between columns: 3000 mm Hjdpszq Ektefx Amyer Max. workpiece height: 1200 mm Max. drilling depth: 600 mm Max. deep-hole drilling diameter: 35 mm Spindle speed: 3500 RPM Spindle power: 15 kW

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table Hodpsy Saw Hjfx Amysr - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: good (used), Code: 0743 Brand: MASTERWOOD - ITALY Model: SPEEDY 207 - CE Standard Hjdpfxjzp D Nlo Amyjr Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 vertical and 1 double horizontal independent chucks - Spindles rotation rpm 4500 Saw for longitudinal cuts - Saw rotation rpm 6000 Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Vertical pneumatic tool displacement mm 60 Max panel thickness mm 50 Vacuum pump 16 m3/h for panel clamping Vacuum cup diameter mm 80 Clamping cylinders for narrow workpieces against fixed rear stops Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Safety protection: carpet sensitive to the presence of people Overall dimensions - Machine : mm 2500 x 1500 x 1800 h - Weight kg 860 Overall dimensions - Electric board : mm 800 x 550 x 1100 - Weight Kg 120

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders Hedezp Dn Iepfx Amyor - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Tools , drills will come without tool cabinet . Tool trolley with toolholders will come. Hjdpfx Ajzd D N Ijmyjr

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (customer has also processed 0.4 mm) Maximum sheet thickness: 3 mm Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Hjdpozphaujfx Amyer Diameter of straightening rollers: 70 mm Total power consumption: 1.4 kW Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Hjdpeugbrqofx Amyor Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,800 mm, total length: 1,500 mm, total width: 1,700 mm, overall weight: 1,550 kg, The machine comes from a training workshop and has hardly ever been used. Condition: Like new. Hsdszq Hzyspfx Amyer

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 375 mm, travel distance Y-axis: 230 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 115 rpm, type of input current: three-phase, overall weight: 200 kg, table length: 700 mm, table width: 190 mm, power: 0.75 kW (1.02 HP), distance table to spindle center: 405 mm, WMD32G - ROGI Gear-Driven Milling and Drilling Machine Drilling Capacity ----- 32 mm Face Milling Capacity ----- 63 mm End Milling Capacity ----- 16 mm Work Table Dimensions ----- 700 x 190 mm T-Slot Dimensions ----- 12 mm Spindle Taper ----- ISO30 Max. Distance Spindle - Table ----- 405 mm Spindle Travel ----- 75 mm Head Tilting ----- Left / Right 45 Degrees Table Longitudinal Travel ----- 375 mm Table Cross Travel ----- 230 mm Speed Range 115 - 1700 rpm Weight ----- 200 KG Motor ----- 750W AC Voltage ----- 230V (INVERTER) INCLUDES * 3-axis digital readout SINO * Floor stand * Digital depth stop * ISO30 milling arbor including 6 collets * Drill chuck with shank DIN2080 / ISO30 * Left / Right switch * Spindle guard * Drift key Hodpfx Amjx N Ndqsyor

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Hsdpfxjw I Unwo Amysr Location: Röllbach

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine Hedolk R Epepfx Amyor with 3 numerical axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel guides with numerical adjustment with 21 drilling spindles (10 left and 11 right) Spindle spacing: 32 mm max. drilling distance: 640 mm max. tool diameter: 40 mm max. drilling depth: 65 mm max. horizontal drilling height: 35 mm Working height: 860 mm max. plate thickness: 60 mm max. plate size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per working cycle: 5 NL Dust extraction connection: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Hodpjxcgtgjfx Amyjr Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), functionality: fully functional, TRIADE FR3 S Drilling Machines for Turned Parts Number of drilling units: 3 1. Lower unit: 3 kW 2. Upper unit: 1.5 kW 3. Lower unit: 1.1 kW (can also be used for screwing in sleeves/screws) Hsdpfeznmlysx Amyor Pneumatic material clamping system Application: Drilling of legs, turned parts, curtain rail components Weight: 1200 kg Dimensions: 115 x 128 x 180 cm (H)

Condition: new, functionality: fully functional, drilling depth: 55 mm, rotational speed (min.): 2,800 rpm, power: 3 kW (4.08 HP), table height: 875 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, High productivity for drilling furniture sides The MAGGI Boring System 46 is a semi-automatic multi-spindle drilling machine, equipped with two parallel vertical heads, each with 23 drilling spindles. It is the ideal solution for furniture manufacturers who frequently drill holes in the sides of cabinets, bookshelves, wardrobes, or shelving units. Thanks to the two drilling heads, the machine drills two parallel rows of holes in a single work cycle, significantly reducing production time compared to a machine with a single head. Manufacturer MAGGI – Italy Number of spindles 46 pieces Spindles left - right 11 left, 12 right Distance between spindles 32 mm Distance between outer spindles 145 – 625 mm Distance front unit-fence 15 – 494 mm Distance rear unit-fence 160 – 639 mm Hsdpfx Ajzp H Nzjmyor Maximum vertical drilling depth 55 mm Maximum drilling tool diameter (Ø) 40 mm Drill shank diameter (Ø) 10 mm Hydraulic piston stroke 70 mm Maximum panel thickness 50 mm Maximum workpiece size 3000 x 700 mm Table height from the ground 875 mm Workpiece clamping pistons 6 pieces Number of motors 2 pieces Motor power 2 HP/ 1.5 kW Motor speed 2800 rpm Required air pressure 6-8 bar Air consumption 20 l/cycle Exhaust hood diameter (Ø) 80 mm Overall dimensions 1206 x 1180 x 1163 mm Net weight 366 kg Supply voltage 400 V – 3 Phase – 50 HZ

Condition: good (used), Code: 0451 Brand: MCN - ITALY Model: JUNIOR - CE Standard Bit mortising machine for furniture, joinery, custom-made furniture, doors, shelves and various – CE standard Technical data: Table length 530 mm Table width 230 mm Table height from floor 800 mm Max groove length 200 mm Max groove depth 150 mm Hjdpfx Ajzm Slpjmyor Vertical spindle stroke 200 mm Spindle attack 16 mm Spindle 2800 rpm Motor power 2 Hp Pneumatic clamping device for workpieces Weight kg 160

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Defective – PLC controller missing. Hodpfx Aszmxf Asmyor

Condition: used, Used dowel drilling machine, Scheer DB 12 Hedpfx Ajzpv Rzemyer 3 drilling spindles, pitch 32 mm Maximum drilling depth: 45 mm with a drill length of 80 mm Maximum drilling depth: 70 mm with a drill length of 105 mm Operation: foot pedal Number of material clamps: 1 Type of material clamping: pneumatic Table size: 400x250 mm Weight: approx. 130 kg Dimensions: approx. 1350x650x950 mm Motor power: 1.1 kW

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Hjdpfjzmtpvjx Amyer Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: used, Year of construction: 1996, Drilling head with 21 spindles, pitch 32 mm, working width: 640 mm, portal passage: approx. 750 mm, drilling stroke: 100 mm, positional adjustment of the drilling unit: 0-45 mm, positional adjustment of the hole pattern: 0-300 mm, spindle speed: 2800 rpm, shank diameter of the drill: 10 mm, clamping height of the workpieces: max. 100 mm, motor: 1.5 kW, working height: 850 mm, compressed air connection: 6 bar, weight: approx. 400 kg. Location: Nattheim. Hodoy Dd I Hepfx Amyjr

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Automatic knotting machine, year 1995, in excellent condition. Hjdpfx Amozphg Ueysr The Interholz Raimann A 10 is an automatic knotting machine for wood (a knot removal machine) used for precisely cutting out defective knots and filling the resulting voids with wooden inserts (patches). Detailed historical and technical information can be found in the Wood Tec Pedia database by Höchsmann, and documentation and diagrams can be found in the Mar-masz online store. Main technical data: Purpose: Cutting out knots and gluing in repair dowels in solid wood. Dimensions of the work table: Approx. 640 x 470 mm. Drill/knotter diameter: Standard range of 25–35 mm (depending on the installed accessories). Power supply: 380V (three-phase). Application in production: Furniture and flooring: Allows for aesthetically pleasing repair of visible wooden elements. Raw material recovery: Increases the value of the material by removing defects instead of rejecting the entire piece.