Used C.b. 1030 2/22 for sale (80,260)

Condition: used, Technical data: Ledpfx Ashqxwbjb Aohn Working width: 1030 mm 1 Calibration aggregate Shaft diameter: 140 mm 2 Combination unit with pneumatic shoe Shaft diameter: 100 mm Height of the processed material: 160 mm Sanding belt dimensions: 2 feed belt speeds Extraction port diameter: 2x160 mm Electric lifting Digital display Safety switch Main engine power: 12 kW Voltage: 380V Producer: C.B. Overall dimensions: Length: 1450 mm Width: 1700 mm Height: 1850 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput Lodpfjx Af Rdsx Ab Ashn - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 276 kg, load capacity: 22 kg, arm reach: 1,612 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 22 R1610-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 22 R1610-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2022 with 0 operating hours. Robot specifications - Model: KUKA KR 22 R1610-2 - Payload: 22 kg - Reach: 1612 mm - Year of manufacture: 10/2022 - Operating hours: 0 h / NEW - Weight: 276 kg - Cable set: INT 076ST1610 - Configuration: ES13 116 CTR PNT EPS AIR VAC GND - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.3 - Servo configuration SC5.1 - 400 V transformerless power supply - Parallel Safety interface X11 - Ethernet interface XF277 - CSP 2x USB 3.0 / 1x RJ45 KLI - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PLC ProConOS4-1 4.1 - KUKA.DiagnoseSafety 2.1 Lhedpfxezyyzls Ab Aon The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2080403, CNC Horizontal 5-Axis Double-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2017 Machine Number: 2080403 Control System: CNC Siemens 840 Number of Axes: 5 Number of Spindles: 2 Double Table System Lhedpfe Aarqpsx Ab Asn Travel Ranges X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories Powerful CNC horizontal machining center with a double spindle and double table system for precise and efficient series production. Location: Maribor, Slovenia Availability: By arrangement Inspection possible by appointment.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Lsdpfjzdp Ntox Ab Aohn Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080100, CNC Horizontal 5-Axis Twin-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2011 Machine Number: 2080100 Lhjdpfx Abs Aarpxj Aen Control System: CNC Siemens 840SL Number of Axes: 5 Number of Spindles: 2 Dual Table System Travel in X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories High-performance CNC horizontal machining center with twin spindle and dual table system for precise and cost-effective series production. Location: Maribor, Slovenia Availability: Immediately available Inspection possible by arrangement.

Condition: used, Thickness planer/jointer: Max. planing width: 410 mm Max. planing height: 240 mm Cutterhead diameter: 100 mm Lhjdpfoziaxpox Ab Asn Number of knives: 3 Total length of table tops: 2000 mm Table top size adjustment Horizontal drilling machine: Drilling table is movable Lateral feed Eccentric clamping Total power: 4.44 kW Power supply: 380 V Overall dimensions Length: 2000 mm Width: 1160 mm Height: 1300 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2080082, Used CNC horizontal machining center, 5-axis, with dual spindle and dual table Technical data – SW BAW06-22 Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2010 Machine number: 2080082 Control system: CNC Design: Horizontal Number of axes: 5 Number of spindles: 2 Number of work tables: 2 Travel in X-axis: 600 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Maximum spindle speed: 17,500 rpm Rapid traverse rate: up to 45 m/min Tool holder: HSK-A63 Machine weight: approx. 16,000 kg Accessories: Standard accessories Availability: Available immediately Machine description Ljdpfx Aj Aarpfob Aehn Used CNC horizontal machining center SW BAW06-22 with 5-axis machining, two work spindles, and a dual table system. The dual-spindle design allows two workpieces to be machined in parallel. The high spindle speed of up to 17,500 rpm enables productive and precise machining. Additional manufacturer data According to the technical data sheet from SW, the following values are specified for the BA W06-22 series: Spindle distance: 600 mm Spindle power: 2 × 35 kW Spindle torque: 2 × 80 Nm Tool magazine: 2 × 42 positions, optional larger Maximum tool length: 425 mm Maximum tool weight: 10 kg Control system according to manufacturer: Siemens SINUMERIK 840D sl Operating voltage: 400 V / 50 Hz

Condition: used, Technical specifications: Max. cutting depth: 170 mm Angular adjustment of the unit within the range: 0° - 45° Transverse travel of the unit: 200 mm Guide lubrication Eccentric clamping Manual feed Power supply: 400 V Main motor power: 1.8 kW Motor speed: 2800 rpm Ljdpozik Izsfx Ab Ashn Overall dimensions: Length: 700 mm Width: 850 mm Height: 1750 mm

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. Lhodezk U Hwopfx Ab Asn The machines can be inspected under power at any time by appointment.

Condition: like new (used), Year of construction: 2019, Hunkeler UW6-22 Unwind Module + RW6-22 Rewind Module Manufacturer: Hunkeler Model: UW6-22 / RW6-22 Year of Delivery: December 2019 Equipment: Unwind / Rewind Modules Condition: Unused since delivery / Stored in original transport packaging Quantity: 2 units Equipment 1. Hunkeler UW6-22 Unwind Module Packing Size: 220 × 145 × 160 cm Gross Weight: 785 kg Serial No.: Available upon request 2. Hunkeler RW6-22 Rewind Module Packing Size: 220 × 145 × 160 cm Gross Weight: 826 kg Serial No.: Available upon request Technical Specifications According to the original Hunkeler delivery documentation: - Maximum Operating Speed: 100 m/min - Paper Grammage Range: 40–300 gsm - UW6-22 Unwind Module: Slack Web configuration - RW6-22 Rewind Module: Tight Web configuration - RW6-22 Web Tension Range: 10–50 N * Condition & Description Hunkeler UW6-22 Unwind Module and RW6-22 Rewind Module. Both units were delivered to Korea in 2019 and have not been used in production since delivery. They have been stored in their original transport packaging. One package has only been opened from the top for inspection, while the other package remains unopened. Lhsdsz Ivbzopfx Ab Ajn Location: Korea Availability: Immediately available

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Lhodpfxozwhbbj Ab Aon Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: used, Year of construction: 2006, functionality: fully functional, cutting width (max.): 1,700 mm, cutting length (max.): 1,960 mm, Equipment: safety light barrier, We are offering this used Kongsberg XL-22 paper cutting machine, manufactured in 2006, for sale. Lhjdpfsz S Ntyox Ab Aon PICK-UP MUST BE COMPLETED BY THE END OF OCTOBER! It cuts perfectly and has recently been serviced; that is why the Gamma image cover is not attached. All covers are available. A vacuum pump is also included. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2011, A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement. Lhodpfx Aez Irmtob Ajn

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Lhsdpfjyf Az Tox Ab Asn

Condition: good (used), Year of construction: 1998, Heidelberg Autoplate (Automatic Plate Changing System) +Version Alcolor Dampening CP Tronic Control System Lhsdpfx Abew U A Npo Asn Automatic Ink Roller Washing Device Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Condition: Cleaned

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240-2 2000 industrial robot, including control cabinet 57273 The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Brand: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial number: 910452 Control cabinet: 57273 Year of manufacture: 02/2008 Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning warranty. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated price is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Ledpfjz Rnnaex Ab Ashn Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 Industrial Robot, KRC2ed05 The KUKA KR 240 L210-2 robot is a 6-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications for the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specifications Manufacturer: KUKA Model: KR 240 L210-2 2000 KRC2ed05 Lhjdpfxoz Rnmvo Ab Asn Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Year of manufacture: 07/2008 Used – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Fjbmlrmrjzmtfksuepn Ex works / free loading. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries are available upon request – please specify country, city, and postal code. Freight costs are available upon request – please specify delivery address.

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Lhjdpfxszilz Ns Ab Aon Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate control system Year of manufacture: 2016 Travel distances: X 450, Y 600, Z 330 Speed range: 20 – 18,000 rpm, stepless (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Internal coolant supply (IKZ 80 bar) Chip conveyor on the left Coolant system Compressed air nozzle at the spindle center Bed flushing Automatic cabin door, automatic cabin roof Polycarbonate safety screens Rotating clear window (Rotoclear) Lhjdpfx As Ad Uh Seb Aen Compressed air for measuring probes Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement Oil mist extraction 4 adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 Industrial Robot, including control cabinet 56178 The KUKA KR 240 L210-2 robot is a 6-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications for the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240 L210-2 2000 Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Ljdsz Ru Hcjpfx Ab Ashn Repeatability: 0.06 mm Weight: 1277 kg Control cabinet: 56178 Year of manufacture: 01/2008 Used – shows normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected on site. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please provide country, city and postal code. Freight costs available upon request – please provide delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR240-2 2000 Industrial Robot, including control cabinet 57250 The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Control cabinet: 57250 Year of manufacture: 02/2008 Used item – normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. Lodpfxez Ru D Us Ab Aohn The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: ready for operation (used), * Brand: Gfa * Surface: length 2200 mm, width 1000 mm - 2 Decks * Driving: 2 pieces vibration motors of each 2 kW Ljdeywnatepfx Ab Ashn

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, KUKA KR150L110-2 robot, 2000 Number of axes: 6 Max. payload: 110 kg Max. reach: approx. 3100 mm Year of manufacture: 8/2009 Scope of supply: Robot, controller, cables, teach pendant Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Ledpfx Asz Rt I Seb Aohn Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate path control Year of manufacture: 2014 Travel ranges: X 450 Y 600 Z 330 Speed range: 20 – 18,000 rpm, infinitely variable (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Internal coolant supply (IKZ 80 bar) Chip conveyor, left-hand side Lhjds Ad Uppepfx Ab Ajn Coolant system Machine bed flushing Automatic cabinet door, automatic cabinet roof Polycarbonate safety screens Rotating clear window (Rotoclear) Compressed air for limit switches Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement system Oil mist extraction 4 adjustable machine feet Operating manuals