Used Bucket Sealer Semi Automatic for sale (28,605)

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Iisdpfeigyp Hsx Aqujc Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Modular 50S The Minipack Modular 50S is a compact, well-proven semi-automatic packaging machine with L-shaped sealing for producing shrink wrap packaging. The machine is universally applicable and easy to operate. – Semi-automatic packaging machine with L-shaped sealing – Electronically controlled sealing system – Manual or automatic operation mode – Simple and intuitive operation – Output up to 900 units per hour – Usable sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm Iiedpex Tr Tcjfx Aquoc – Max. film roll diameter: 250 mm – Working table height: 930 mm – Machine dimensions (closed): 1,565 × 750 × 1,100 mm – Machine dimensions (open): 1,565 × 750 × 1,400 mm – Machine weight: 151 kg (net) – Machine on wheels

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK Modular 70 The Minipack Modular 70 is a powerful semi-automatic packaging machine featuring an L-bar sealing system for producing shrink film packages. Thanks to its larger sealing bar, it is also suitable for packaging larger products. – Semi-automatic packaging machine with L-bar sealing – Electronically controlled sealing system – Manual or automatic operation modes – Simple and intuitive controls – Output up to 900 units per hour – Usable sealing bar dimensions: 840 × 600 mm – Max. film roll width: 800 mm – Max. film roll diameter: 300 mm Iijdex Tr Umopfx Aqusc – Working table height: 930 mm – Machine dimensions (closed): 2,070 × 960 × 1,220 mm – Machine dimensions (open): 2,070 × 960 × 1,510 mm – Net weight: 243 kg

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Ijdpsw Rqv Aefx Aquoic

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Ijdpfx Aqswz Ev Tsusic Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: repair required (used), functionality: not functional, Pictures show : 2-spindle drilling head , pneumatic clamping device , hydraulic feed device . Technical data : Continuous drilling capacity 50 mm Normal drilling capacity 65 mm Spindle motor , pole-switchable 3 / 5 kW 4 infinitely variable speed ranges Gear stage 1 50 - 375 and 100 - 750 rpm Iedpfx Aqjzd Uryousic Gear stage 2 100 - 750 and 200 - 1500 rpm Distance from spindle nose to table approx. 800 mm Spindle stroke 200 mm Column diameter 160 mm Projection 325 mm Entire table 650 x 500 mm Height approx. 2.1 m Normal weight approx. 0.7 to . Equipment and scope of delivery : - Table clamping from the front - Coolant device - Electric cabinet - without table height adjustment - Hydraulic feed device - the hydraulic unit is missing ! (drill feed can be operated manually via a cross lever)

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1235/1250P, cutting width (max.): 1,250 mm, working width: 1,250 mm, input current: 64 A, paper height (min.): 1 mm, paper height (max.): 10 mm, label length: 250 mm, working length: 1,235 mm, production capacity: 300 unit/h, STOCK LM 1235/1250P LAMINATION MACHINE | 1250 MM | GERMAN MADE For sale: STOCK LM 1235/1250P lamination machine manufactured by the German company Stock Maschinenbau GmbH. This machine is designed for laminating corrugated and solid cardboard with decorative paper, labels, and printed sheets, enabling the production of aesthetically pleasing packaging, promotional boxes, and display materials. The machine is equipped with an automatic gluing system, a label positioning system, and a pressure roller that ensures high-quality material bonding. Its robust German construction guarantees stable operation and low operating costs. Key advantages: • Working width of 1250 mm • Ability to laminate XL sheets up to 1620 x 1210 mm • Smooth speed adjustment • Smooth adjustment of the feed table movement • Automatic glue feeding and replenishment • Glue level sensor • Easy and quick adjustment of operating parameters • Central lubrication system • Pneumatic clutch • Cycle counter • Safety system: safety bar and scrapers Equipment: • Semi-automatic label feeder Iedpfx Aqozd Dwleuoic • Table for manual feeding of plano sheets • Manual feeding of corrugated cardboard or die-cuts • Gluing unit with automatic glue feeding • Sensor for detecting and registering labels • System for positioning and applying cardboard • Pressure roller • Receiving table for stacking finished parts • Central frame for mounting die-cuts Technical data: • Manufacturer: Stock Maschinenbau GmbH (Germany) • Model: LM 1235/1250P • Year of manufacture: 1995 • Maximum working width: 1250 mm • Size of laminated sheets: up to 1620 x 1210 mm (length virtually unlimited) • Thickness of laminated materials: 0.8 - 10 mm • Performance: approximately 300 cycles/h • Power supply: 380 V / 50 Hz • Power: 18 kW • Power socket: 64 A • Machine dimensions: 6720 x 1910 x 1580 mm This machine represents an economical solution for companies seeking an efficient and reliable laminator for the production of premium packaging. The German construction guarantees durability, stable operation, and ease of use.

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control Iiedpfjycqhcex Aqujc The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Semi-automatic compact glass storage system 25 positions Iiodpszdylxefx Aqujc Maximum glass size: 3210 x 6000 mm Drawer load capacity: 6000 kg Total loading capacity: 150000 kg (150T) In very good and clean condition Good working order, tested As is See video

Condition: new, Thomas Super Trad 301 So Easy – Semi-automatic metal bandsaw Promotional price: €9,400 instead of €11,100, excluding VAT. Capacity, round: 255 mm - The SO EASY saw enables a complete cutting cycle without constant operator presence thanks to the hydraulic control system for lowering the saw frame. - Hydraulic vice - Limit switch to adjust the saw frame return position directly above the material to be cut - Selector switch to switch to MANUAL cutting mode with a button for quick access to the material to be cut - Central control panel on the front of the machine with a bright alarm system - Automation is controlled via a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large, round "plateau" work table that rotates with the blade during miter cuts, guaranteeing excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional bandsaws. - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow for lateral movement. - Cuts from 0° to 60° to the right and 45° to the left are possible - Saw blade rotation with 2 electric speeds - Saw blade tension adjustment via handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush FEATURES - Saw frame, vice and plateau made of cast iron - Precision saw blade guide with carbide pads and adjustable rollers - Gears immersed in oil STANDARD EQUIPMENT - Adjustable stop with millimeter scale - Hydraulic vice - Material support bracket - Bimetal M42 saw blade 2750 x 27 x 0.9 mm - Set of service keys - CE certification and operating and maintenance manual OPTIONAL - Roller conveyor loading side (2 m) - Roller conveyor unloading side with stop (2 m) - Blada minimal lubrication system - Start pedal Technical data - Capacity, round 0°: 255 mm - Capacity, round < 45°: 160 mm - Capacity, round 45° >: 200 mm - Capacity, round 60° >: 110 mm - Capacity, square 0°: 250 mm - Capacity, square < 45°: 160 mm - Capacity, square 45° >: 190 mm - Capacity, square 60° >: 110 mm - Capacity, rectangular 0°: 300 x 220 mm - Capacity, rectangular < 45°: 190 x 100 - 150 x 170 mm - Capacity, rectangular 45° >: 190 x 170 mm - Capacity, rectangular 60° >: 110 x 130 mm - Saw blade dimensions: 2750 x 27 x 0.9 mm - Saw blade speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gear reduction ratio: 40/1 - Flywheel diameter: 300 mm - 3-phase electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg Isdjzcpkpjpfx Aqusic

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Ijdofh R Tuspfx Aquoic Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Iiedpfxsfibd Te Aqusc Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Iedpfx Asfibfasqujic Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Iijdpfx Aefh R Tyequjc Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Iodpfjg S Ui Ajx Aqueic

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display Iedpfx Ajxdr Rtoqusic

Condition: used, - Brand: GECOMA - Model: SMART 11 - Type: bread slicer - Version: semi-automatic - Serial No.: 13 SM 411 026 - Year: 03/2013 - Slice width: 42 cm - Slice thickness: 11 mm - Useful passage: 42 cm - Passage height: 15 cm - Cutting depth: 32 cm - Maximum output: 200 loaves/hour - Power supply: 400 V three-phase - Power: 0.55 kW - On stand/base - Operation: right or left hand - Bagging: ergonomic tray - Integrated crumb drawer Inclined loading table, allowing fully front-facing operation. • Assisted traction technology "Softlift". A transverse bar replaces the classic side lever: Iisdpfx Ajy N Sp Ajqujc • Advantages: Reduced effort. Can be used with right or left hand, or two-handed operation. • Compact footprint, allowing perfect integration in a cabinet. • Balancing of mechanical stresses. • Bagging tray at ergonomic height. • Integrated crumb collection drawer. • Various base options available.

Condition: ready for operation (used), Year of construction: 2016, Reepack ReeFlex 250 – Automatic Tray Sealer The professional automatic tray sealer Reepack ReeFlex 250 is designed for industrial packaging of food products. This machine was developed with high performance, reliability, and flexible operation in modern production lines in mind. The machine is in good technical condition and ready for operation. Key information: Manufacturer: Reepack Model: ReeFlex 250 Year of manufacture: 2011 Type: in-line automatic tray sealer Frame made of AISI 304 stainless steel Siemens PLC control with touch-screen HMI operator panel Dual mold system to increase production efficiency Capable of working with MAP technology and vacuum packaging (depending on configuration) Technical parameters: Number of trays per cycle: 2 to 8 pieces Working capacity: approx. 6–15 cycles/min Energy-efficient system Optimized energy and compressed air consumption Robust industrial stainless steel frame Available formats: The machine is equipped with tooling for various tray sizes. Mold dimensions: 325 × 265 mm 227 × 178 mm Equipment options: ✔ Option to sell with a used vacuum pump ✔ New vacuum pump available as an option ✔ Various configurations tailored to customer needs Applications: Perfect for packing: meat and meat products poultry fish ready meals vegetables and salads cheeses and dairy products Iodsy Rrraopfx Aqusic An ideal solution for Modified Atmosphere Packaging (MAP) to extend product shelf life. Advantages of the equipment: ✔ High production efficiency ✔ Easy operation and quick format change ✔ Reliable industrial design ✔ Hygienic construction compliant with food industry standards ✔ Possible integration into production lines

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Iodpfxjzaz N Ej Aqueic Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw Iedpfsy Dcr Djx Aqujic - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: new, functionality: fully functional, warranty duration: 24 months, Sinmag SM4-30 semi-automatic divider Iedpfx Aqozccc Sousic - brand new - weight range 40-120 g - divides into 30 portions - 2 working trays - operating voltage 3 x 230 V - motor power 0.75 kW - 24-month warranty - pick-up from warehouse / shipping option available - price upon request

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Iedpfszaazasx Aqueic A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Iodjzaay Aepfx Aquoic The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Iodpfx Aozaaxfequjic A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. Iiodpezaawzofx Aqusc If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !