Used Brook Hansen Wudf225M for sale (29)

Condition: used, power capacity / kW volt / V ampere / A weight 375 kg BROOK HANSEN—Engine Type: WUDF225M Power: 30kW Speed: 980 rpm 380-420V Klodpjy S Dm Esfx Ap Aow Power: 34.50 kW Speed: 1170 rpm 440-480V

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm Kodpfjd N Dd Njx Ap Aslw -Weight: 10.5 kg

Condition: used, feed pressure / bar liter capacity / l Kjdpfx Aozcgipop Aelw power capacity 5,5 kW

Condition: used, feed pressure / bar Kjdpey S D D Rofx Ap Aolw liter capacity / l power capacity 17,3 kW

Condition: new, Gear Units / Gearboxes / Transmissions, Large stock of used and unused gear unit and reducers from manufacturers like Flender, Siemens, Hansen, KSB, WGW, TGW and SALA Kledpfx Asggfhnjp Ajw Different ratio's, sizes, with / without backstop. Please contact us to find a suitable gearbox.

Condition: new, Year of construction: 2009, functionality: fully functional, power: 50 kW (67.98 HP), nominal power: 50.01 kW (67.99 HP), rotational speed (min.): 2,950 rpm, input voltage: 400 V, input current: 85 A, overall weight: 570 kg, Brook Crompton electric motor, model W-DF 250 MN-H ATEX || 2G T3 50 kW / 2950 rpm / 400 V / 85 A Kjdpev Dw Izjfx Ap Aolw 68 hp

Condition: used, functionality: fully functional, 2 x high-quality HANSEN patented industrial gearboxes Type: D631 CT • Input speed: 1,435 rpm • Output speed: 55.8 rpm • Gear ratio: approx. 25.7:1 • Safety factor: 1.6 Kjdpfx Ajzib A Aep Ajlw Type: 631 • Power: 33 HP (approx. 24 kW) • Input speed: 1,455 rpm • Output speed: 44 rpm • Gear ratio: approx. 33:1

Condition: used, Electric motor, three-phase motor -Power: 1.1 kW Kljdpfx Apsdzyldo Aew -Speed: 2850 rpm -Shaft: Ø 19 x 100 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 355/200/H220 mm -Weight: 12.5 kg

Condition: excellent (used), Fladder SC 300 finishing and brushing machine Year of manufacture 1995 Klodpfx Aer Eri Aop Asw Manufacturer Fladder System Denmark Carousel working height 800 mm Working width 1200 mm Passing speed 0.3 - 10.0 m/min. Automatic pneumatic presses Main motor 7.5kW Number of spindles 6 Rotary motor 0,37kW Carousel motor 0,55kW

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm work bowl : 1000 mm X1600 mm X 550 mm Kljdpfot Dbakjx Ap Ajw Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: excellent (used), functionality: fully functional, Despite its age, the machine is in like-new condition!!! For sale is a powerful wire erosion machine, model 600 ERCOCOM II, from Dieter Hansen, equipped with a Heidenhain control system. Ksdpfoykq U Eox Ap Aslw The machine is equipped with high-quality components and is particularly suitable for precise applications in tool and mold making. Features & Highlights: • Adaptimat with gap process monitoring – specifically for graphite machining to avoid arcing (New price alone approx. €13,000) • 16-position electrode changer for automated series machining • Erowa clamping system for precise and fast setup • 3D probe with carbide ball for accurate measurement • Cooling system (7 kW) • Integrated extraction system for fumes Some barrels with dielectric fluid are included! An inspection and functional test are possible by appointment. If you are interested, we look forward to hearing from you. The price includes packaging on the original heavy-duty pallet and loading onto your truck using a forklift.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Ksdpfeyrqzbox Ap Aolw

Condition: used, MAHO INGERSOLL HANSEN HS 300 E die sinking EDM machine Ksdpfx Apsyghmdj Aelw

Condition: excellent (used), 11 kW engine. Belt width: 100 cm. Ksdpfxey Tg Sgj Ap Ajlw

Condition: used, 21-12- Wood bandsaw NP HANSENS (used) Motor power 3,7 kW Wheels diameter 800 mm Max cutting height 320 mm Dust exhausting hood Ø100 mm Kjdotq Tnxepfx Ap Aelw Table dimensions 750 x 630 mm Made in Denmark Transport dimensions 2400x800x1700 mm Weight 690 kg Price 1150 Eur (EXW Jonava, Lithuania)

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath Ksdpsxcbnxofx Ap Ajlw BROOKFIELD Type TC-102D Serial No. D07200476 Temperature range: +5 °C to +150 °C Temperature stability: ±0.05 °C Temperature uniformity

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Kljdpsuqgbyefx Ap Ajw Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: ready for operation (used), 4-kW-Motor Arbeitslänge 255 cm Arbeitsbreite 100 cm Arbeitshöhe 50cm Kledpfx Apjun S Ims Aow

Condition: good (used), Features: • Accurate, Rapid, Easy to Use • No Cell Alignment or Calibration • Temperature Control, 5 - 75° C • Customizable Reports, SP Charts, Two-Parameter Plots, Graphical Overlays • Integrated Computer The Brookhaven ZetaPlus is designed for rapid, accurate and, above all, straightforward determination of zeta potential and electrophoretic mobility of fine particles from around 5nm up to about 50µm. Its principle is the measurement of the Doppler shifted frequency spectrum of scattered laser light using a known reference frequency for maximum accuracy. Kodoupafvepfx Ap Aolw The key attraction of the ZetaPlus is its simplicity of operation due to the innovative design of its sample cell – electrode assembly. Using low cost, disposable cuvettes and simple "plug-in" electrodes, it completely eliminates the problem of electroosmosis – for all samples. With this system, cell alignment with respect to the laser beam is no longer critical and therefore requires no periodic checking or adjustment. Bubble-free filling of the cell is easy and fast and the volume of sample required is minimal. Sample temperature is accurately controlled by a fast response dual-Peltier system operating in the range 50C to 750C. For most common liquid media, necessary physical constants are all pre-programmed throughout the temperature range. pH can be read directly into the ZetaPlus software. Zeta potentials can be automatically plotted against pH or any other variable of the user’s choice, such as surfactant or additive concentration.

Condition: used, Year of construction: 2010, Brooks Automation Wafer Front-End Module, 300mm, ASYST Spartan EFEM, Sorter Model: ASYST Spartan EFEM Type: Sorter Condition: Used Technical Data: Kledox I Ax Sspfx Ap Asw 100-240V AC 50/60Hz 10A General: 300-mm EFEM with 3 load ports, cleanroom mini-environment, and integrated wafer transfer robot This unit is an Equipment Front End Module (EFEM) from the ASYST Spartan series, designed for fully automated handling of 300 mm silicon wafers in semiconductor manufacturing. It features three load ports, a mini-environment with ULPA air filters, internal lighting, comprehensive safety controls, and all necessary interfaces for seamless integration into production lines. In addition, it comes with a fully integrated wafer transfer robot that extracts wafers from FOUP/carrier load ports, separates them, and precisely delivers them to downstream process modules. Year of manufacture: 27.12.2010 Including CD with operating, service, and installation manuals (9701-3060-01 Rev G)

Condition: used, functionality: unexamined, machine/vehicle number: DX2TLVKJO, Used Brookfield viscometer DX2TLVKJO in case. Klsdpfx Aoxmhbyjp Ajw

Condition: used, functionality: unexamined, machine/vehicle number: DV-I, Used Brookfield DV-I Viscometer – Viscosity meter Klodpex A Autjfx Ap Asw

Condition: refurbished (used), Polycold PFC1102: be good as new be available at short notice Klsdpfx Apoftzdro Ajw

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Kedpjugvxxefx Ap Ajlw Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm, welding fume extraction -Handover in the actual condition as seen -Welding fume extraction: with articulated extraction arm -Extraction fan: Brook Crompton 0.75 kW Ksdpfx Apelry Tge Ajlw -extraction arm: total length 3880mm -Inlet connection: Ø 170/160 mm, outlet Ø 150 mm -Number: 1x suction available -Price per piece -Transport dimension: 1900/800/H560 mm -Weight: approx. 67 kg/pc.