Used Benteler 30-2626/01Wm4513C.132 for sale (25,644)

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 Njdpfxsz Rztvo Ab Aodc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Ndodpev Hr Nxofx Ab Aoc

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28109 hours Compressor 4: 28973 hours Regular service was performed by a specialized service company! Not operated since 2019. Ndodpfx Aberkpp Ho Asc Have been stored in a dry and heated location since then.

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, Ndsdegzzwnspfx Ab Aoc -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Ndsdpfx Aezgq Szob Ajc

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear door Equipment: - Multiplex walls - 6x tie-down points Ndedpfx Aozy Axmeb Ajc - Single-leaf rear door Net: €2,899.16 / Gross: €3,450.00 Article number: HKP113251315.01 Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Interior dimensions (LxWxH): 251 x 132 x 152 cm • Exterior dimensions (LxWxH): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Tare weight: 410 kg • Payload: 890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Stable V-shaped drawbar, hot-dip galvanized • Longitudinal beams continuous • Single-leaf door at the rear • Twist-lock and hinges galvanized • 1x maneuvering handle at the front • Tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra tested • Reverse automatic • ALKO coupling and parking brake • Plastic fenders • Interior light installed • 13-pin connector • Rear lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamp in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 6 lashing eyes - Tailgate - Multiplex walls Net price: €3,108.40 / Gross price: €3,699.00 Article number: HKP113251315.02 Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 251 x 132 x 152 cm • External dimensions (LxWxH): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Tare weight: 425 kg • Payload: 875 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Sturdy V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • Tailgate with gas spring and non-slip surface (maximum load 300 kg) • Twist lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra tested • Automatic reversing system • ALKO overrunning device and parking brake • Plastic mudguards • Interior light installed • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Ndjdpfx Aozy Dxbsb Aec Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - 6 lashing eyes - Multiplex walls - Rear doors Net price: €3,004.20 / Gross price: €3,575.00 Article number: HKP113251315.07 Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 251 x 132 x 152 cm • External dimensions (L x W x H): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Unladen weight: 410 kg • Payload: 890 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating • Stable V-drawbar, hot-dip galvanized • Longitudinal beams continuous • Double-leaf door at the rear • Twist-lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, pulling force 400 kg per lashing eye, Dekra tested • Reverse light automatic Nodpezy Diyofx Ab Asdc • ALKO drawbar coupling and parking brake • Plastic fenders • Interior light installed • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamp in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, side opening, 1x side panel extension Equipment: -V2A screws -Removable cover -Aluminum cover Net: €3,474.79 / Gross: €4,135.00 Article number: K41313251221.01 Technical data: • Brand: Koch-Anhänger • Model: 4.13 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 250 x 125 x 65 cm • External dimensions (LxWxH): 383 x 179 x 132 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Unladen weight: 324 kg • Payload: 976 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/70R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Side panel height 60 cm + cover height 5 cm • Double-walled, anodized aluminum side panels, 30 mm thick, with integrated aluminum frame • Side panel with load securing system; accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A stainless steel) • Stable floor panel, non-slip (birch plywood, waterproof glued) • Very stable latches for the rear door made of V2A stainless steel (unique) • Cover can be opened to the right side in the direction of travel • 3 stable V2A stainless steel hinges on the left side • Stable aluminum cover with non-slip aluminum tread plate, walkable • 8 mm V2A screws • Stable cover railing • Optional crossbar set can be mounted on the railing • Stable V2A cover lock at the rear with disc lock • 1 reinforced gas spring for easy opening • Cover easily removable • Maintenance-free rubber spring axle, hot-dip galvanized • Suspension and drawbar from reputable manufacturer ALKO • Safety indicator on the coupling • Steel fenders • Rear door easily removable • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Standard equipped with balanced 1A brand tires • Large 195/70R14 tires, balanced and capable of 100 km/h • All screws are M8 stainless steel (V2A stainless steel) • Clear control panel with the most important data (tire pressure, cable arrangement, etc.) • Including 10-year Koch warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Ndjdjzy A Nljpfx Ab Ajc Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 155196, Sheet metal stamping machine with motor, manufactured in 2018. No longer required due to a change in production processes. Weight approx. 3.5 tons, for sale to the highest bidder. Shipping only possible with payment of shipping costs and prepayment. Sold as is, we assume no warranty or guarantee, no returns accepted. Nsdpfxo Aa I Iws Ab Aodc

Condition: used, Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Data: Build Volume: 300 x 300 x 300 mm Layer Thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium Fiber Laser Laser Type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Nodpfxjzh Dp Ae Ab Aedc Cooling: Water Central Wavelength Range: 1070 ±10 nm Modulation Frequency: 0-50 kHz Average Power, max. 600 W Power Adjustability: 10-100% Beam Parameter: 0.37 mm x mrad Condition: used Scope of Supply: (See Image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh 65 and 5 [mm]. Lateral tension, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a frame. Upon request, we can manufacture a custom frame with chutes. Ndedpfxez Dkxye Ab Ajc

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,204 h, functionality: fully functional, machine/vehicle number: MR610745176, punching force: 30 t, type of input current: three-phase, punching diameter: 88 mm, input frequency: 50 Hz, compressed air connection: 6 bar, input voltage: 400 V, Equipment: safety light barrier, Euromac MTX FLEX 12 P 1250/30 X2250 (Year of Construction 2016) – Only 2,204 punching hours! Includes a large tool package & special tools. For sale is a very well-maintained, fully functional CNC punching machine, the Euromac MTX FLEX 12, manufactured in 2016. The machine is in excellent condition and has a very low net punching time of only approximately 2,204 hours (total operating time approximately 9,055 hours, see display photo). A particular highlight is the extensive tool and accessory package, which, in addition to standard and multi-tool tools, also enables valuable special applications such as engraving, countersinking, and deburring from below. 📌 Technical data & machine highlights: Manufacturer: Euromac (Italy) Model: MTX FLEX 12 P 1250/30 X2250 Year of Construction: 2016 Punching force: 300 kN (30 tons) Working area: 1250 x 2250 mm (can be extended as required) Net punching time: only ~2,204 hours (total number of strokes: approx. 6.19 million) Table: Gentle brush table for scratch-resistant sheet metal processing Control: Top Punch Touch (TPT) on a robust Panasonic Toughbook control unit 🛠️ Special equipment & special features: Integrated engraver: For direct labeling/marking of components during the punching process. Countersinking tool from above: Specially equipped for 4.0 mm SPAX countersinking. Deburring from below: Ideal for precise marking/deburring from the underside. Multi-tool capability: Full support for multi-tool cassettes (e.g., XMTE6 / XMTE10) for quick tool changes and high flexibility. 📦 Scope of delivery & accessories: Large punching tool assortment: Extensive package of punches, dies, blanking punches, and cassettes (including high-quality tools from Wilson Tool & Mate). Double/replacement equipment: Including installed multi-tool + identical replacement multi-tool (see picture V40) for uninterrupted workflows. Software: Lantek programming software included. Accessories: Tool holders, clamping jaws, manuals/documentation. 📋 Condition, inspection & logistics: Condition: The machine is currently still assembled, fully operational, and connected to the power supply. Test & inspection: A demonstration and trial punching on-site in 78224 Singen can be arranged. Loading: Loading on-site can be organized/supported. Transport: Transport and collection are the responsibility of the buyer. 💶 Price & invoicing: Njdj Aaz Tyjpfx Ab Asdc Price: 90,000 € negotiable (net plus 19% VAT) You will receive a proper invoice with VAT stated. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2018, operating hours: 100 h, rotational speed (min.): 2,982 rpm, input voltage: 500 V, ABB electric motor, 132 kW 50 Hz, 2982 rpm 500 V 6-month warranty Nedpfev I Ervjx Ab Asdc

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website. Ndjdpof Eyqqefx Ab Asc

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Nedpfxsiz A Ezo Ab Ajdc Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Horizontal glass washing machine BENTELER tecLine 25/3 Nodpfxex Ecv Ao Ab Asdc Year of production: 2003 Maximum glass working width: 2500 mm 3 pairs of brushes (6 pcs.) Very good and clean condition As is Available immediately

Year of construction: 2016, condition: ready for operation (used), Max. printing format: 1200x650mm, max. printing speed: 1000mm/s, connected load: 8kW, with documentation, has been regularly serviced by the manufacturer, on-site inspection is possible. Nsdpfx Abjq N A Nco Aedc

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Motor: 15 hp Nedpfe Acd N Nox Ab Aodc Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t

Condition: new, Year of construction: 2026, neu 2026 070225 prompt, Zwischenverkauf v Türkei 33700 € 643.67 € 1 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm 2050 mm 1670 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Ndsdpfjwirbxox Ab Aoc Options: vibrations pads € 132,- bolster plate € 720,-

Condition: used, Year of construction: 2011, machine/vehicle number: M318, Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Control SystemsThe monoblock integrates advanced automation to ensure repeatable filling accuracy and stable carbonation control. The Omron PLC coordinates the rinsing carousel, isobaric filling carousel, and capping turret with synchronized drives. Operator-friendly controls help streamline format changes and reduce setup time.Omron PLC automation for reliable machine coordinationCentralized control of rinse, fill, and cap turretsAutomatic operation with format-dependent parametersIsobaric process control for carbonated beverage handlingInterlocked guards and access doors for safe operationProduction Line Integration CapabilitiesDesigned for seamless integration in a beverage production environment, this monoblock is suitable for embedding into a complete used bottling line or operating as a core station within an industrial packaging system. It can be coupled upstream with depalletizing and air conveyors and downstream with labeling, inspection, packing, and palletizing equipment.Inline integration with conveyors and accumulation systemsCompatible with standard PET handling componentsFlexible for carbonated beverage applicationsOptimized for 0.24L PET; adaptable across similar small-format PETMachine Condition & Maintenance HistoryThis second hand monoblock is presented in ready-for-operation condition, suitable for beverage producers seeking dependable performance. The robust engineering typical of MESAL equipment supports consistent uptime when correctly maintained and commissioned.Ready for operation with standard commissioningIndustrial-grade construction for durabilitySuitable for inclusion in a used bottling line upgradeOperational Performance & VersatilityEngineered for carbonated beverage filling, the isobaric system maintains product CO2 content and fill-level stability. The PET handling components support 28 mm neck finishes, common in CSD applicatio... Nsdpfx Abj Adt Nzj Asdc

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Njdpfov Rmkxox Ab Ajdc

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Ndsdpei Ab Akofx Ab Aec Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, Year of construction: 2006, functionality: fully functional, Fully renovated, repainted drilling machine. Guides, bearings, compressed air pipes has been fully changed. Njdpexz Ez Hjfx Ab Aedc

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 30 kg, arm reach: 2,100 mm, ROBOTIC ARM BRAND: KUKA MODEL: KR 30 R2100 / SEL TECHNICAL DESCRIPTION PAYLOAD: 30 KG MAX. REACH: 2100 MM YEAR OF MANUFACTURE: 2024 CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 Ndedpfx Abj Ad Ng No Aec OPTIONS: KRC 5 dualcab BA C5 dualcab AC SPB USB KSI