Used Bausmann Nail Rolling Welding Machine for sale (69,629)

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Speed - 100 nails/sec. ( frequency regulator ) Hfedpfedmbp Usx Ag Ieg Management - PLC Simens S5

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Machinetype: thread rolling machine for nails Make: ENKOTEC Type: TA01 Hfsdpewm Rtzsfx Ag Isg Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V with 2-step switch (high/low range) Hjdpfjtxl Ivox Ag Ijfg Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Main switch Synchronous welding control unit 8036 Weight: 635 kg Example photo Machine is still being refurbished

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. Hfodpfx Agjdx Suho Iog .

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Hfjdpfew S Exuex Ag Ieg Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Hfodpfx Agsdzzyfe Iog

Condition: used, Year of construction: 1971, machine/vehicle number: 15162, Roller diameter 150 mm, coolant device and machine lamp Hodpfx Agey Sqigj Iofg

Condition: used, Year of construction: 1954, machine/vehicle number: 6315, Roll diameter 200 mm, coolant device and machine lamp Hfsdpfx Agsy Sqi Te Iog

Condition: good (used), Year of construction: 1998, FOR SALE: ORT ITALIA RP 24 Thread Rolling Machine Precision machine for thread forming, ideal for high-performance industrial production. Capacity & Technical Details Pressing force: 24 tonnes. Brand: ORT Italia. Hfedpjy Shd Isfx Ag Ijg Model: RP 24. Year: 1998 Power supply: 380V / 20A. Equipment Automation: Integrated automatic loading. Control: Digital control panel. Ejection: Discharge chute included.

Condition: good (used), - Type: AKLE-L 700 - Year of manufacture: 2011 - Serial number: 0127930010 Hfjdpforu Dd Rsx Ag Isg - 2 x available both are new unused

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Hodpfx Agjrdf Aco Isfg Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: good (used), 3-Roll Plate Rolling Machine Type R55 Working length 1020 mm Maximum sheet thickness 1.25 mm Hjdpfx Ajy Rx Dcjg Iefg Good, fully functional condition.

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Hsdpov Dia Aofx Ag Iefg Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Hodpfxjwq Hp To Ag Ijfg Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Hodpsr Ikvmsfx Ag Ijfg Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Hfedpsvvvw Ejfx Ag Isg Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Hfjdpjwq Hqkofx Ag Isg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option Hjdpfoxw D Udsx Ag Iefg TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Hfodpfx Agsx D Dfve Isg Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: used, Year of construction: 1958, machine/vehicle number: 197, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller length: 1,100 mm, sheet thickness steel (max.): 2 mm, overall weight: 750 kg, total length: 1,650 mm, total width: 1,000 mm, total height: 1,750 mm, input voltage: 400 V, Equipment: foot remote control, hardened rollers, Type: 3-roll plate rolling machine / bending machine Construction: Robust, fully steel construction ("all-steel") for high durability and rigidity. Versatility: Suitable for both sheet metal and profile bending, including conical bending. Hjdpfx Ajy Spbhog Iefg Application: Widely used in heavy industry.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Hsdpfx Agoy Snyco Iefg

Condition: used, CORRUGATED SHEET METAL ROLL FORMING LINE – SGP Costruzioni Meccaniche Hfjdpfx Agjy Smxwe Iog Composed of: • EGB 401 MAT 11/98 roll forming machine with 18 stations • Motorized decoiler mod. AS/P 10x1250 • Loading cradle • Infeed table unit • Fixed start/stop cutting unit • Discharge table • Stacker • General control panels with console system

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Hfsdoyb Szhspfx Ag Ieg Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, Straightening and welding plate made of steel Hfedjy N Du Rspfx Ag Iog Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Hsdpfx Agey N Duke Isfg Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition