Used Battenfeld Injection Moulding Machines for sale (66,672)

Condition: used, Wittmann Battenfeld Type: SmartPower 210 Wittmann Battenfeld injection molding machine with UNILOG B8 control For use with thermosets Current software version IO4.26 The machine was serviced / inspected by WITTMANN BATTENFELD Deutschland GmbH in 2026 and brought up to the most current possible standard. In addition to the pressure switches that are already normally present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the mold internal pressure switch upgrade are included in the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C Year of manufacture: 2017 Operating hours: 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max. (HLP 32) min 30°C (86°F) / max. 40°C (104°F) Oil temperature min / max. (HLP 46) min 40°C (104°F) / max. 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, hydraulic pump 37kW Motor voltage Lsdpfezdywnox Ab Ashn Frequency Water system: Oil cooler: Cooling water consumption approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F) NW ⅜" Cooling water battery: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water outlet ∅ ¾" Number of heating zones incl. nozzle 5 Clamping unit SmartPower 210 Clamping force 2100kN Link to a short demonstration video on YouTube: ?v=DGLJ1uijosw Type: SmartPower 210 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Calculated displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Lhedpfszpwrgex Ab Aon Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Disassembly and collection must be carried out by the buyer. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Ledpfxekucxle Ab Ashn Weight: approximately 6000 kg In like-new condition

Condition: excellent (used), Year of construction: 1993, Battenfeld BK-T 2500/1250 Closing 250 TO Lodpfx Ajr Nf Rteb Ajhn Year 1993 Scrow 60 mm distance between tie bars 63x56

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Lhedoz Hn Spspfx Ab Aen

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Lhodpfx Ajwl Rucsb Ajn Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 805 kN, screw diameter: 42 mm, injection weight: 172 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 80M injection moulding machine. The BOY 80 is one of the most compact 80t clamp machines around, a great allrounder, fitted with the Procan 2 controller and 42mm diameter screw, which gives a shot weight of 179 (PS)g. Lsdpfxswfpqco Ab Aehn Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Lhsdjibyatopfx Ab Aen Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Lhsdpozhpg Tjfx Ab Aon terms of payment: 100% prior to delivery

Year of construction: 2004, condition: ready for operation (used), A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect. Lsdpfx Abeyz Anmj Aohn

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Ljdpfx Abj Aa Alwj Ashn

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 Ledpfx Abovdqbhs Aohn 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Delivery time: by arrangement Lhedpfx Aov S H Rhob Ajn Payment terms: 100% before taking delivery of the machine, net

Condition: reconditioned (used), Year of construction: 2004, clamping force: 129 kN, ejector stroke: 30 mm, total length: 27,400 mm, total width: 810 mm, total height: 1,600 mm, overall weight: 920 kg, pump power: 5,500 W, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Lhjdpfx Abetpw I Uo Asn Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Lodpfx Abe Aaz Taj Aohn Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ledezp R Izspfx Ab Aehn

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. Lhsdpewm Iz Nsfx Ab Aon ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Lhodpfx Aozl Enhsb Aen

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Lodpfx Abozvy E Ao Ajhn

Condition: good (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503729 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar equipment included incl. Spruepicker screen text german CEE-socket 16A core pulling hydraulically 1x Anti vibration mounts mould heating 6x handling type: Linear manufacture: ARBURG controller: INTEGRAL PICKER Lsdpfxjz Eahaj Ab Aohn year of construction: 2012 measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System Ljdpfxjwm Iy Es Ab Aohn The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible. Lhodpfxjy T Sdzj Ab Aen

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) Ljdpfxsv S H Rbj Ab Ashn delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm Lhedsgrzh Espfx Ab Aen distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Lodpfx Abor N Rh Hj Ajhn