Used Angelini Mas 140 for sale (7,746)

Condition: used, functionality: fully functional, spindle bore: 35 mm, well-maintained conventional lathe. Nedpfx Agjzzdnlj Iolh

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Nljdpfxey Ryrho Ag Ioh Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Rapid traverse: 8000 mm/min Max. feed force: 5000 N Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Nedozdp Txepfx Ag Islh Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 - Siemens S5 Nodpfx Agez Ngzis Ielh - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,223 h, functionality: fully functional, machine/vehicle number: 1278R18TBF, turning length: 720 mm, turning diameter over cross slide: 530 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 720 mm, bar passage: 65 mm, total height: 2,100 mm, total length: 4,300 mm, total width: 2,000 mm, overall weight: 4,200 kg, number of tool stations in tool turret 3: 12, Due to the closure of the business, an AMV Angelini Oscar turning machine with a Y-axis and counter-spindle is for sale. The machine is very well equipped – 3-jaw chuck for the main and counter-spindle, collet chuck Hainbuch for the main and counter-spindle, parts catcher, prepared for a bar feeder, chip conveyor. Nodpfjy S R Atsx Ag Ijlh High-pressure pump, 12 powered tool stations VDI30. Control system: Fanuc 21 I-TB series. Numerous accessories are included, such as turning tool holders and powered tools. The machine is still connected to power and can be inspected by arrangement. Price includes loading onto a truck (FCA).

Condition: used, Offered is a radial drilling machine with a movable machine column. Equipped with a height-adjustable radial arm, electrically driven drill head, control panel with emergency stop button and machine base with guide rails. Inspection possible by arrangement. Nedpfo Afpkdsx Ag Ijlh

Condition: used, functionality: fully functional, KOVOSVIT VO 63 Radial Drilling Machine – Drilling Capacity 80/100 mm For sale: used KOVOSVIT VO 63 radial drilling machine, manufactured in the former Czechoslovakia. Heavy-duty industrial radial drill designed for drilling, boring, countersinking and tapping operations on large and heavy metal workpieces. The machine features a height-adjustable and swivelling radial arm, a horizontally movable drilling head and a heavy-duty base plate with T-slots. Technical specifications: - Manufacturer: KOVOSVIT Holoubkov - Model: VO 63 - Max. drilling capacity in steel / cast iron (solid drilling): 80 / 100 mm - Max. tapping capacity in steel / cast iron: M85 - Max. spindle nose diameter: 100 mm - Spindle travel: 380 mm - Spindle taper: Morse MT6 - Number of spindle speeds: 16 - Spindle speed range: 11.2–2,000 rpm - Number of spindle feeds: 16 - Spindle feed range: 0.035–2.8 mm/rev - Spindle reach min./max.: 386–2,000 mm - Distance from spindle to base working surface min./max.: 473–1,803 mm - Base working surface: 1,100 × 2,300 mm - Number of T-slots: 3 - T-slot width: 22 mm - Distance between T-slots: 250 mm - Main motor power: 7.5 kW - Power supply: 3 × 380 V / 50 Hz - Connected power: 10 kVA Dimensions and weight: - Length: 3,700 mm - Width: 1,380 mm - Height: 4,050 mm - Machine weight: 7,100 kg Nsdpfxoz Rpado Ag Ielh Equipment and features: - Height-adjustable and swivelling radial arm - Horizontally adjustable drilling head - Mechanical spindle speed and feed selection - Mechanical spindle feed - Heavy-duty base plate with T-slots - Conventional control Machine condition: Used machine in the visual condition shown in the attached photographs. Normal signs of age and previous use, including paint wear and areas of superficial corrosion. Further information available upon request.

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Year of manufacture: 2015 Nlsdpfx Agjzydarj Ijh Heidenhain iTNC 530 control system X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Tool changer: 24-position SK50 Spindle speed: up to 8000 rpm Spindle torque: 406 Nm / 100% 623 Nm / 40% Chip conveyor Coolant pressure: 20 bar Weight: 11800 kg

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Nlodoz Iyq Tjpfx Ag Ioh

Condition: good (used), functionality: fully functional, Scope as per image. Infinitely variable speeds up to 3,000 rpm. Nodpo Aavq Hefx Ag Islh

Condition: used, Year of construction: 2016, Laminate Coating System Manufacturer: Type: Master PUR-1400 Year of manufacture: 2016 Technical data Professional PUR hot-melt laminating system for acrylic, PET, PVC, HPL, and CPL sheets General description The MASTER PUR-1400 is a professional, high-performance laminating system designed for single-sided lamination of sheets with PUR hot-melt adhesive. The system is suitable for continuous industrial production and offers excellent surface quality with low adhesive consumption. It is designed for the production of high-quality furniture panels, interior design components, wall panels, and decorative panels. Suitable substrates The machine is suitable for laminating: MDF Chipboard Plywood PVC sheets Gypsum boards Other wood-based panels Compatible surface materials The system is designed for processing the following materials: Acrylic sheets (high gloss & super matte) PET film PVC film HPL laminate CPL laminate Decorative paper Technical data Working width: 1,400 mm Maximum sheet size: 2,800 x 1,300 mm Sheet thickness: 2-40 mm Production speed: 5-17 m/min Throughput: 3-5 sheets/min Maximum productivity: up to approx. 1,200 sheets per 8-hour shift Installed motor power: 21.49 kW Heating power: 51.7 kW Overall dimensions of the machine: approx. 16 x 2.5 x 2 m Required installation area: at least 6 x 22 m System configuration Nedpfx Aozuzkqog Islh The production line includes: Automatic feeding system with roller conveyor Brush cleaning system for sheets Infrared preheating oven (IR) 3-roller PUR adhesive application system Feeding station for decorative material Laminating press with pressure rollers Take-away conveyor 208-liter melting tank for PUR hot-melt adhesive Advantages Excellent laminating quality Uniform PUR adhesive application Suitable for high-gloss and super-matte acrylic surfaces Low adhesive consumption Stable and reliable operation in industrial series production High production efficiency Easy operation and maintenance Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Nsdpfjzwhkiex Ag Ielh Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm Nljdoyzq Dpepfx Ag Ieh weight 7000 kg

Condition: new, Year of construction: 2025, Our priority is buyer satisfaction. Sheet metal bending machines from PROD-MASZ are designed according to individual customer requirements. Thanks to many years of experience in the industry, we can effectively implement the expectations of the roofers, to whom we primarily address our offer. Semi-automatic folding bench ZGH-2140 / 3.0mm -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production the maximum working length: 2140 mm Bending power: 3.0 mm (steel) Bending beam thickness: 30 mm Bending angle: max. 140 degrees Upper cheek opening: 80-95 mm Weight: approx. 1300 kg Power: 3 KW- 400 volts CE marking with a control panel Warranty: 12 months Delivery date: up to 3 weeks from the order date -ᐳ Adjustable support bars with scale optionally plus 1250 euros Nljdpocxu Tzefx Ag Ijh We are looking forward to your contact!

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Njdpfjzg Dx Ujx Ag Islh Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Year of construction: 2023, Used for the production of refrigerator door panels. Line Specifications: Manufacturer: MAS AUTOMAZIONI SRL Year of manufacture: 2023 Electrical supply: 400 V (±10%), 50 Hz Compressed air: 4.5-6 bar, dew point +5°C Cycle time: 10 seconds Changeover time: Automatic Line dimensions: 38.1 m (L) × 9.6 m (W) × 4.4 m (H) Sheet dimensions: Length: 400-2200 mm (±1 mm) Nledpfezummqex Ag Ijh Width: 650-900 mm (±1 mm) Thickness: 0.35-0.55 mm (±0.04 mm) The metal sheet forming line consists of: Sheet loading with measuring laser sensors. Punching and bending station with 2 sets of bending blades for different shapes. 2 available spaces for additional bending or forming stations. 2nd punching stations. Total number of pieces produced to date: 89,963. 2 scrap conveyors. Siemens S7 control system.

Condition: used, Year of construction: 2000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain TNC426/430, total height: 2,400 mm, total length: 2,600 mm, total width: 3,100 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 5,500 kg, spindle motor power: 28,000 W, X - Travel 1000 mm Nedpszimklefx Ag Islh Y - Travel 450 mm Z - Travel 650 mm Table Length 1300 mm Table Width 600 mm Length 2600 mm Width 3100 mm Height 2400 mm Weight 5500 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Qualitative Machine Benefits • Perfect condition • Full documentation available including service history Technical Machine Benefits • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Dimensions Machine Depth 4200 mm Nodjzv N Iajpfx Ag Ijlh Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - roller width 400mm Nljdpfjzx Rntjx Ag Ieh - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2120mm *from above: - pawls - smooth pressure roller - pawls - smooth pressure roller - saw arbor - 2 smooth pressure rollers from below: - guide - smooth sliding roller - pawls - track - central lubrication - 2 lasers - stepless feed rate adjustment - feed motor 1.1kW - main motor 37kW - electric body lifting 0.75kW - electric saw arbor lifting 0.75kW - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 2200x1850x2100mm - weight approx. 3000kg ADVANTAGES - German production - laser - electric body and arbor lifting - stepless feed rate adjustment - multi-blade saw, used, very good condition Net price: 109900 PLN Net price: 25558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 1998, functionality: fully functional, The used AVM ANGELINI DG13 2-axis CNC lathe is a medium to large-sized, 2-axis numerically controlled lathe with an inclined bed, featuring a center distance of 850mm, an ASA 8” spindle nose, and a maximum bar capacity of 90mm. It was manufactured in 1998 (installed in 2000), complies with “CE” standards, and is equipped with a FANUC 0-T CNC control. Nodpezu Awfofx Ag Ijlh It features a 315mm hydraulic chuck, a 26kW spindle motor, a 12-position automatic tool changer turret (with corresponding tool holders), and is complete with a tailstock, a chip conveyor, manuals, and a “CE” certificate.

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Nsdpfxez E A T Ej Ag Ielh Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Nledpfjt Tfbqox Ag Ish Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: new, Year of construction: 2026, More time saved! More convenience! The RED-3200/1.0/155* electric swing bending machine is ideal for thin sheet metal processing up to 1.00 mm steel sheet, recurring one-off productions, and small-batch manufacturing. The upper beam and bending beam are motorized. The RED-3200/1.0/150* motorized swing bending machine has a working length of 3200 mm and bends steel sheets up to a maximum thickness of 1.00 mm. Prod-Masz's electric sheet metal bending machines now feature an electric pressure lifting device. This is a fully electric sheet metal bending machine. ✔️ Maximum working length: 3200 mm ✔️ Bending capacity: up to 1.0 mm (steel sheet) ✔️ Titanium-zinc sheet: 1.0 mm, aluminum sheet: 1.2 mm, copper sheet: 1.2 mm ✔️ Bending angle of the bending machine: max. 150 degrees Nlsdpfx Agecri E Ns Ioh ✔️ Bending jaw thickness: 18 mm ✔️ Cutting with the roller shear across the entire working width ✔️ Lifting of the upper beam in three positions ✔️ Upper jaw stroke: 80 mm ✨ Seize this unique opportunity and upgrade your workshop with the best press brake on the market! Trust the manufacturer that has been an industry leader in metalworking for years. -> Rotary shear (max. cutting capacity 1.2 mm / steel) plus €500 -> crusher/ welt press plus €75 Delivery costs: € please ask Additional equipment: - Rotating finger guide 65cm plus €1250 - Measuring gauge 36cm (2 pcs.) €75 - Measuring gauge 65cm (2 pcs.) €150 Delivery date: every Monday/Tuesday Cash on delivery or prepayment We look forward to hearing from you! - We issue invoices

Condition: good (used), Year of construction: 1996, Radial drilling machine, MAS Kovosvit V0 80, serial number 151321248, manufactured in 1996, weight approximately 12,000 kg, overhang approximately 200 cm, with a large clamping cube. Nledpjz Ib Uyofx Ag Ioh

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, located in 45891 Gelsenkirchen, is a Seydelmann Konti cutter, model KK 140 AC-6. The cutter was manufactured in 2023, is used, and comes from a business liquidation. Currently, the cutter is still connected to power and can be inspected by appointment. We will gladly provide you with the technical specifications upon request if you are interested in purchasing it. Nlsdpfx Aez Izntog Ish Dismantling and loading are the responsibility of the buyer.