Used Adjustable Gearbox for sale (25,126)

Condition: good (used), adjustable gearbox, variable speed gearbox, spindle gearbox -Manufacturer: PIV, variable speed transmission -Type KS 712 B3 -Shaft diameter: 19 x 28 mm -Shaft diameter: 19 x 40 mm -Individual components: see photos -Overall dimensions: 385/350/H310 mm Hsdsikgc Njpfx Ap Hent -Weight: 38 kg

Condition: good (used), adjustable gearbox, variable speed gearbox, spindle adjustment gearbox, extruder gearbox, PIV gearbox -Manufacturer: PIV, adjustable gearbox type RZO without drive -Adjustment range: R-9 Hnsdpjtxklmsfx Ap Hot -Chain: Rb 1 40 -Technical data: see photo type plate -Shaft diameter: 18 x 30 mm -Total dimensions: 290/220/H320 mm -Weight: 31 kg

Condition: good (used), adjustable gearbox, variable speed gearbox -adjustable -Design: B5 -Angle gear ratio: 1:15 -Inlet shaft diameter: 19 mm Hnjdpfsb A Nn Hsx Ap Hot -Output shaft diameter: 25 mm hollow shaft -Weight: 26 kg

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. Hedpeyw Rzaofx Ap Hjnt The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Hjdpfxewrp Emo Ap Hjnt Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 2.25 kW (3.06 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: AC, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 130 mm, actuation type: manual, rotational speed (max.): 2,380 rpm, rotational speed (min.): 65 rpm, total width: 685 mm, total length: 1,030 mm, total height: 1,900 mm, throat depth: 300 mm, table width: 600 mm, table length: 460 mm, overall weight: 410 kg, Equipment: documentation/manual, rotational speed infinitely variable, Column drilling machine SerrMac TCO 40L - Year of manufacture: 1999 - Good condition considering its age - Work table: 600 (width) x 460 (depth) mm - Motor: 2.25 kW - Spindle speed: 65 – 2,380 rpm – 2 speeds via gearbox, infinitely variable within each speed Hsdpez Ailrofx Ap Hsnt - Mechanical drill drive with feed rate adjustment possible - Thread cutting device - LED table lighting (retrofitted) - Sturdy machine with a robust column - Weight: 410 kg - Fully functional - Tool holder, clamping devices, and a vise can be purchased separately, depending on the pricing - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. Sale is only to commercial customers after inspection and acceptance on-site. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) - no shipping.

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hnsdpfjz Aqlmsx Ap Hjt Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: used, Year of construction: 2021, functionality: unexamined, Metal Band Saw Automatic Daiß + Partner HBA 320 SG Power-Line, HBA 320 SG Power-Line, Year of complete overhaul: 2021, mitre saw in 2-column design, drive power: 240/400 Volt, 2.2 kW frequency motor, cutting speed: 15 - 105 m/min, reinforced gearbox for high cutting performance, hydraulic system flow rate l/min, electrics: 240/400 Volt, 50 Hz three-phase power, control voltage: 24 Volt DC, automatic feed length: 8,400 mm (in combination with PS 210: 600 mm), multiple feed standard: 2-fold, maximum workpiece support weight: 2000 kg, maximum transport force: 1000 kg, transport frame repeat accuracy: approx. 0.02 - 0.04 mm, mitre cut angle accuracy: approx. 0.05 mm at 100 mm diameter for St 37 material, saw blade dimensions: 4400 x 34 x 1.1 mm, blade tension: constant tension via spring set, weight: 2330 kg. Dimensions (L x W x H), Features: - 1 control cabinet opposite - 1 CNC control PS 95 - 2600 x 2200 x 1950 mm - 2-axis control for feed and mitre adjustment - 1 frequency drive 2.2 kW - 1 Daiß+Partner Power-Box - 1 motor-driven chip brush - 1 stepless drive via frequency converter motor - 1 micro-cooler instead of coolant unit - 1 hydraulic blade tensioning Hsdpjyr Ifwefx Ap Hjnt - 1 saw blade breakage monitoring - Inspection under power possible

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Hedjz Aq Nfopfx Ap Hjnt Motor brake Further technical data and information can be found in the attached documents.

Condition: good (used), Year of construction: 2005, functionality: fully functional, spindle bore: 50 mm, turning diameter: 190 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 190 mm, center height: 170 mm, center width: 700 mm, turning length: 600 mm, quill stroke: 120 mm, total length: 1,596 mm, total width: 880 mm, total height: 1,240 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, type of input current: AC, overall weight: 730 kg, Equipment: rotational speed infinitely variable, Due to restructuring measures, we are selling our conventional lathe – EMCO EM 17 D. Hsdpfez Aff Ijx Ap Hsnt - Year of manufacture: 2005 - Good condition - Fully functional - Distance between centers: 700 mm / Center height: 170 mm - Max. turning diameter: 340 mm (190 mm over cross slide) - Max. turning length: 600 mm - Spindle max. 3,000 rpm – 5.3 kW - Speed infinitely adjustable (frequency control) - 4-speed gearbox – with reduction - Constant cutting speed adjustable - 3-jaw chuck 200 mm - 2+1-axis digital display - Complete machine documentation - Depending on the price, various tool holders, a 4-jaw chuck (faceplate) 200 mm, and a collet chuck device (tube and collet) can be purchased. - The machine can be inspected while powered on. - Full spare parts supply and service provided by EMCO. This offer is subject to change. Sale is subject to prior sale. No online sales. The sale is only to businesses after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) – no shipping.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Hnedexx Nuxepfx Ap Het Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Hnedpjxp Sb Aofx Ap Hst Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Hjdpoyzc Efsfx Ap Hsnt

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Hsdewfiaqspfx Ap Hsnt Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: ready for operation (used), functionality: fully functional, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, The 3-phase 380V motor is running smoothly! Forward and reverse operation. Electronic motor brake. Geared headstock, gears running in oil. 9 adjustable spindle speeds from 52 to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both directions, including cross-travel. Coolant pump. Emergency foot pedal. Hnjdpfxszkwfce Ap Hot D1-3 camlock spindle nose. Dickson quick-change toolpost with a total of 4 toolholders. MT3 tailstock. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €4,150.00

Condition: used, adjustable gearbox, variable speed gearbox, spindle adjustment gearbox -Manufacturer: GUSA Gensheimer, adjustable gearbox type SK 25 without drive -Speed range: n2 0-300 rpm at n1 1500 rpm -Drive motor: can be supplied at extra cost -Shaft diameter: 15 x 28 mm / 17 x 35 mm Hsdpeupbc Nsfx Ap Hont -Total dimensions: 300/200/H140 mm -Weight: 14 kg

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle Hodpfxex Hdq Te Ap Hont - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: new, functionality: fully functional, ✅ New stock ✅ €4,179 incl. VAT ✅ Available immediately ✅ Shipping possible The SCHORR RR1000DHKB crawler dumper is a powerful and versatile mini dumper with hydraulic tipping drive and a payload capacity of up to 1,000 kg. Powered by a 15 HP single-cylinder 4-stroke petrol engine, it effortlessly tackles rough terrain and inclines. The self-propelled dumper is equipped with a robust track drive, ensuring a secure stand and optimal traction. Hnodpfjxvbw Tex Ap Hot The generous loading platform allows for the transport of Euro pallets, even with sidewalls closed. The hydraulic tipping skip makes unloading considerably easier, while the automatic front-opening of the skip ensures complete emptying without manual assistance. Removable side panels make the platform flexibly extendable, allowing for easy transport of larger or bulky loads. Thanks to the intuitive crawler drive, the dumper can be maneuvered safely and precisely even on uneven ground. The foldable ride-on platform enables comfortable travel over longer distances, and the 6+2 speed gearbox ensures precise control and speed adjustment. With a maximum forward speed of 6 km/h and reverse speed of 3 km/h, complex maneuvers on the construction site are easily managed. The RR1000DHKB is designed for outdoor use, combining robust construction with user-friendly operation. The engine features a recoil starter, and all fluids—fuel, hydraulic oil, and gear oil—are easily accessible for maintenance and refilling. Dimensions: Total length 2240 mm, width 900 mm, height 1235 mm. The skip measures internally 1315 × 815 × 300 mm, externally 1390 × 880 × 300 mm, filling height closed 785 mm, and 485 mm without side panels. SCHORR provides comprehensive service: spare parts are always available, and repairs can be carried out in our workshop if necessary. Our team is available to answer your questions or offer advice regarding the RR1000DHKB crawler dumper. This dumper offers excellent value for money, is available immediately, and—thanks to its compact design and high payload—is the ideal solution for small to medium construction sites, landscaping, and industrial applications. We are happy to advise you and assist with any questions regarding the SCHORR RR1000DHKB crawler dumper.

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Hedpfx Apox Dzxae Hjnt Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Hnsdpfx Ajvcfhmjp Hst Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear Hodpszzyd Aefx Ap Hent * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands Hnsdpfx Apjzzyd Ne Het * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Hodezylx Ajpfx Ap Hent Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Hnsdpfjzxmimjx Ap Hot Motor power: 30 HP

Condition: new, Year of construction: 2026, The CORMAK TYTAN 210x520 conventional universal lathe + cutting tools is a professional metalworking lathe designed for precision machining of steel, aluminium and other engineering materials. Its compact design, solid machine bed and 6-speed gearbox ensure stable operation, high accuracy and a wide range of applications in workshops, toolrooms and small manufacturing facilities. CORMAK TYTAN 521 Universal Lathe – Precision Conventional Lathe for Professional Metalworking The CORMAK TYTAN 210x520 universal lathe has been designed for users who require a reliable machine for a wide range of turning operations. The machine's design allows both simple workshop operations and more demanding tasks related to one-off and small-batch production. The 6-speed gearbox allows the operator to easily adjust the spindle speed to the type of material being machined and the operation being performed. Mechanical gear shifting ensures stable operation, high durability and efficient use of the motor's power during turning. Main Advantages of the Machine 6-speed spindle gearbox allowing the appropriate operating parameters to be selected. 750 W / 230 V motor providing stable drive during machining. Compact and rigid construction reducing vibration during turning. Precision bed guides ensuring dimensional accuracy of machined components. Ability to cut both metric and imperial threads. Spindle with an MT3 taper and 21 mm spindle bore. 4-way tool post enabling quick tool changes. Right-hand and left-hand rotation. Spindle guard and chip tray improving safety and working comfort. Standard Equipment steady rest and follow rest, Set of 5 turning tools 125 mm 3-jaw chuck, right- and left-hand jaws, gears for thread cutting, MT2 dead centre, grease gun, chip tray, chuck and tool post keys, open-ended and Allen keys, operating manual in Polish, CE Declaration of Conformity. Optional Equipment lathe stand, 4-jaw chuck, tool holders, live centres, Hsdpjz A A Idofx Ap Hjnt turning tools, drill chucks for the tailstock. TECHNICAL SPECIFICATIONS Specification Value Swing over bed 210 mm Swing over cross slide 115 mm Distance between centres 520 mm Bed width 125 mm Headstock Spindle bore 21 mm Spindle nose taper MT3 Number of spindle speeds 6 Spindle speed range 140–1710 rpm Feed and Thread Cutting Number of metric threads 11 Metric thread range 0.4–3 mm Number of imperial threads 11 Imperial thread range 8–28 TPI Longitudinal feed range 0.05–0.2 mm/rev Cross Slide and Longitudinal Slide Tool post type 4-way Maximum tool post slide travel 70 mm Maximum cross slide travel 115 mm Maximum longitudinal slide travel 460 mm Tailstock Tailstock quill travel 45 mm Tailstock spindle taper MT2 Main Motor S1/S6 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Dimensions Length 1150 mm Width 580 mm Height 550 mm Weight 120 kg