Used Adhesive Melter (Defective) for sale (1,759)

Condition: used, Adhesive melter, gluing machine, hot glue machine, industrial hot glue gun, melting glue gun -sold as a source of spare parts -Connection: 220 volts -Machine: electrically heated Gjdpfx Asb A Rf Sek Uekb -for granules -Propulsion via adjustable geared motor -Dimensions: 700/500/H1200 mm -Weight: 150 kg

Condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun -Manufacturer: Nordson, Adhesive Melting Gun Godpfx Akjx Nftbe Uokb -Type: 2302 -Part No.: 276239 -Transport dimensions: 570/400/H530 mm -Total weight: 35 kg

Year of construction: 2020, condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun, glue binder -Manufacturer: Nordson, VersaBlue melting device with accessories -Type: VB_ENG -Pumps: 3 gear pumps -Accessories/individual components: see photos Gsdpfxjygtnyo Ak Uskb -Dimensions: 1070/760/H1380 mm -Total weight: 330 kg

Condition: used, Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Connection: 220 volts -Power: 500 watts -Melting capacity of up to: 4.2 kg per hour -Machine: electrically heated -for cartridges -Funding: via compressed air Gedsb A Tayepfx Ak Uekb -Weight: 1.8 kg

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Gjdszfx A Espfx Ak Ujkb Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Gjdpfx Akey Hl Nko Uekb

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Godpfx Ajyw Nxksk Uekb Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, IMA Postforming, year of manufacture 1999 The melting adhesive units for surface and corner gluing are not included. The machine offered is being sold as a used unit. The sale is made under exclusion of any liability for material defects. The machine is sold as inspected and without any warranty. The seller does not provide any guarantee for functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent behavior on the part of the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks related to dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest with the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information regarding the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, however, without guarantee. Gkedpfx Akeywfifs Ueb

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 18GG1012, Neopost DS 180i envelope inserting machine from a demonstration unit, practically NEW, hardly used, with only 17,245 envelopes processed on the counter!!! The machine has been fully inspected by a certified technician and is in absolutely new and flawless condition, without any defects. Includes a stacking belt! Technical data: Godpewl Ihtofx Ak Uskb Max. volume (per month) 180,000 Throughput up to 4,500 envelopes/hour optional up to 5,500 envelopes/hour Gathering capacity (multiple extraction) up to 6,900 sheets/hour optional up to 9,400 sheets/hour Envelope formats C6 (optional), DinLang, C6/5, C5 Container capacity for adhesive fluid 10 liters Folding capacity up to 8 sheets (80 g/m2) 22" touchscreen monitor yes Job memory unlimited Automatic job setup yes System capacity documents/feeder up to 500 or 1,000 System capacity envelopes up to 800 Paper thickness documents min. 70 g/m2 - max. 120 g/m2 Max. insert thickness* 4 mm *depending on the feeder module used Folding types single, roll, zigzag, and double parallel folds, as well as no fold

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Gedpjt Hal Djfx Ak Ujkb Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: good (used), Year of construction: 2011, Site price: Carton sealer, Mohrbach, closer 376- second-hand - : Price per unit ex site: only 18.950.-€ (net), incl. loading! Manufacturer: Mohrbach Type: Closer 376 Year of construction: 2011 Machine number: 1112031 Gkodpouxqxaefx Ak Usb with Nordson ProBlue 4 glue melter 4 liter hot melt adhesive Machine dimensions: approx. length: approx. 3.70m plus approx. 60cm for the hot melt machine, width approx. 1.60m, height: approx. 2.18m Condition: good Available: immediately Location: CZ Bor

Condition: like new (used), A company is selling a wide variety of items due to liquidation. Machinery and miscellaneous items! Check out my other listings too! . Gkjdpfxsy Ahixj Ak Uob A custom-made adhesive dispenser for sale. Works perfectly. Features multiple adjustment options.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling Gkedpfx Aox Dmdhsk Uob 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Gkjdpju Rim Hefx Ak Uob * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Gkodpfjpp Tkfjx Ak Uob Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Gksdpfozt Ip Rox Ak Usb Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Godjk Egvdepfx Ak Uekb Bearing track with retractable pin Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Phon group

Year of construction: 2007, condition: ready for operation (used), Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. Gkedpfx Aezug Dcok Usb • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) Gkodpfx Aezz Agmjk Usb 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: used, Year of construction: 2009, Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: TF350 - Year of manufacture: 2009 - Machine type: tray packer for PET bottles - Output: 45 - 50 packs/min - Adhesive system: Nordson ProBlue 4 hot-melt unit - Packaging material: flat cardboard blanks - Guarding: full safety enclosure with viewing panels and access doors - Location: Germany Equipment - Nordson ProBlue 4 hot-melt adhesive melter - Magazine for flat cardboard blanks - Machine-mounted control cabinet - Full safety enclosure with viewing panels and hinged access doors Condition Very good, well-maintained condition. Extensive annual overhauls have been carried out by the manufacturer. The machine is still installed and under power and can be inspected in operation on site. Godpfx Akszuw H Uj Ujkb Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: good (used), Year of construction: 2011, Site price: Carton erector, Mohrbach, erector 541 - second-hand - : Price per unit ex site: only 19.950.-€ (net), incl. loading! Gedpfx Akouxq N Es Uekb Manufacturer: Mohrbach Type: Erector 541 Year of construction: 2011 Machine number: 1112030 with Nordson ProBlue 4 adhesive melter 4 liter hot melt adhesive Machine dimensions: approx. length: approx. 2.06m plus c. 1.36m for the magazine Condition: good Available: immediately Location: CZ Bor

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: Gsdpfx Aoum Hufjk Uekb * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. Gkjdpfxjztqlze Ak Ueb • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Year of construction: 2007, condition: good (used), PRATI LF 330 Machine Type: Label finishing / inspection rewinder Year of Manufacture: 2007 Serial Number: LF012 Machine Type Code: LF330-C0-N0-T0-0-0P0-5-009 Location: Germany Condition: Used – good working condition Unwinding Unit • Shaft unwinder for self-adhesive label rolls • Pneumatic expanding shaft • Adjustable tension control • Suitable for narrow web label rolls Web Guiding System • Electronic web guiding system for precise web alignment • Edge guiding sensors installed Inspection Table • Large illuminated inspection table • Designed for visual inspection of printed labels • Enables removal of defective labels during the inspection process Slitting System Gsdpfx Aeyrg S Aok Uokb • Razor blade or shear slitting system (depending on configuration) • Adjustable slitters for multiple lanes • Suitable for narrow label formats Rewinding Unit • Differential rewind shafts • Independent tension control for multiple rolls • Designed for rewinding several finished label rolls simultaneously Control Panel • Operator control panel for machine speed and tension adjustment • Emergency stop and safety control system Safety Equipment • CE certified machine • Safety guards and emergency stop systems installed Maximum Web Width: 330 mm Power Supply: 400 V – 3 Phase Frequency: 50 Hz Installed Power (Pn): 3.4 kW Nominal Current (In): 7 A Maximum Current (Imax): 9 A Short Circuit Current (Isc): 120 kA Machine Weight: approx. 2,200 kg Typical Applications • Final inspection of printed labels • Slitting of narrow web label rolls • Rewinding finished labels into customer roll formats • Converting and finishing of self-adhesive labels Advantages of PRATI Finishing Machines PRATI machines are widely recognized in the label converting industry for their robust construction, precise tension control and excellent operator ergonomics. The LF series allows efficient inspection and finishing of label rolls, reducing waste and ensuring consistent product quality before delivery. Thanks to the reliable web guiding and differential rewind system, the machine ensures

Condition: used, Year of construction: 2008, - with 6 plates - with 2 labeling stations (front- and back label) for self-adhesive labels Gsdpfez Ad Etjx Ak Ujkb Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 6 bottle diamater max (mm): 100 bottle diamater min (mm): 60 bottle height max (mm): 370 bottle height min (mm): 180 motor height adjustment: yes speed adjusment: frequence converter