Used 64X90 Punching Machine 1963 With Double Action Stripping Unit for sale (91,479)

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Nlsdpfx Aetyqizef Seg Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine Nljdpfozt Nbzox Af Sjg - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Nsdpfx Aoxghngef Solg Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Nodpfx Asx Ndu Def Sjlg Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Barrels of Copper Wire with Punched Parts Control Cabinet Technical Specifications: Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / punching unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Nsdsg T S Tdjpfx Af Selg Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more punching and bending machines - new and used - in our shop! International shipping costs upon request!

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Nljdpfx Asiiyr Sef Sjg

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Nedpfx Aoz Dvfxef Selg Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Njdpszr Ha Eofx Af Selg

Year of construction: 2018, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Nodpfoiiyuqex Af Sjlg Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Also other models available from stock! Inquire about the current stock.

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feeder Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Machines Bracket and Brush Motor with Mounted W32/1-32 Tool Soundproof Cabin Drums of Copper Wire with Stamped Parts Control Cabinet Item Condition: Very Good Manufacturer's Description, Deviations Possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de Nledpeg T S Taofx Af Sjg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) Nodpfjzy Hpijx Af Sslg - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Nlodpfxsz Exv No Af Sog Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Nlodpfx Aey Ndyajf Seg Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Njdpjzh I Iisfx Af Solg Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Nledpfx Aozz Adfef Seg Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Njdoz A Ubispfx Af Solg Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Nlsdpfx Aozmv Dvof Sog Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st pass) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm ?? / ??? Working width (min/max) mm 236 / 1300 - Working length (min/max) mm 250 / 5600 Numerical Control / Software ICOS Open (prepared for ZIMBA) Adjustable feeding speed (m/min ) 10 - 70 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.34 (2 x Kw 12,5) adjustable by N.C., with Hydro-Format-tool-system Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Nlsdpfxez Eka Tj Af Sog Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1570 (with Nordson VersaPUR) Pressure zone (adjustable by N.C.) Edge coils supporting unit (No. 12 reels) with servo material infeed Servo material end-trimming knife to cut the reel material Rough Trimming (Milling) unit 08.0555 HS/LS1 (2 x Kw 1) Fine Trimming (Milling) unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 0,66) Spraying Unit (for sliding liquid) Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.0516 HS/LS1 Glue scraping unit 08.522 Buffing unit 08.617-2 (2 x Kw 0,18) - Spraying Unit (for sliding liquid) No. 1 Milling grooving unit 75.34 (Left-Hand) adjustable by N.C. (1 x Kw 8) Hydro-Format-tool-system No. 2 Milling grooving unit 75.34 (Right-Hand) adjustable by N.C. (2 x Kw 12.5) Hydro-tool-system

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Nedpfx Asz D Ippsf Selg Production speed: up to approx. 50 m/min Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Nsdpfxszxzago Af Sjlg Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 1996, type of input current: three-phase, sheet thickness (max.): 1 mm, total width: 2,000 mm, total length: 20,000 mm, total height: 1,900 mm, shaft diameter: 40 mm, input voltage: 380 V, working width: 300 mm, input current: 40 A, spindle motor power: 15 W, coil weight: 1,500 kg, overall weight: 10,000 kg, We are offering this used Dallan T4R-10-300 punching and profiling line / roll forming machine, manufactured in 1996. Manufacturer: DALLAN Nljdpeztcgqefx Af Ssg Type: T4R-10-300 Serial number: 964310.30 Year of manufacture: 1996 Machine specifications: Sheet width: max. 300 mm Sheet thickness: ± 0.5 – 1.5 mm Number of stations: 16 Number of cassettes: 5 Configuration: Double coil, rolling, punching module, roll forming line (16 stations), flying shear Roller diameter: 40 mm Punching unit: 8 punching units Coil: Double coil (rolls max. 1,500 kg) Current configuration: Omega profiles Dimensions: 20 x 2 x 1.9 meters Weight: ± 10,000 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure Nlodpsy Samujfx Af Seg - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Package counter with shifter. Nljdpezurzaefx Af Ssg Format: min 20mm max 110mm

Condition: like new (used), Double-sided profiling milling and grinding machine, model Uinze 4T2500STD - Year of manufacture: 2023 - New price: €64,000 - Machine is equipped with 2 special carbide milling heads and 2 grinding units Nedpfszqgmcsx Af Selg - Weight: 4300 kg - Safety fence: 800 kg, safety roller gate: 300 kg - Working length: 2500 mm, working width: 170 mm - Motor power: milling unit 4.5 kW, grinding unit 4.5 kW - Table return speed: 80-100 m/min - Milling speed: 4000 rpm

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, Nledpfxez Dv Tvo Af Ssg punching slug extraction, ball bearings in the machine table Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools.