Used 2G G Box 50 for sale (65,499)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,000 h, functionality: fully functional, rotational speed (min.): 1,514 rpm, rotational speed (max.): 1,514 rpm, total height: 1,625 mm, total length: 2,427 mm, total width: 994 mm, overall weight: 1,800 kg, type of cooling: water, number of cylinders: 4, cubic capacity: 4,580 cm³, torque: 341 Nm, protection type (IP code): IP54, For sale are 4 x 2G G-Box 50 cogeneration units in a soundproof enclosure. The units are fully functional and have been regularly serviced throughout their operational period in accordance with the manufacturer's service protocol, using original spare parts. Details: Manufacturer: 2G Model: G-Box 50 Quantity: 4 units Design: soundproof enclosure Fpsdpfoz I Nakex Akyjn Engine age: 10 years Operating hours: approximately 40,000 hours Condition: fully functional and regularly serviced The set includes all necessary equipment for the operation of the cogeneration unit (CHP), including the electrical cabinet, control system, and all other required components. The units are ready for transport. Price: 10,000 EUR/unit

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH Fpsdpfxez Hngme Akysn • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Fpedpfszg Nbhox Akyjn Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar Fpedpfxehgiz Io Akyen

Condition: used, mileage: 765,248 km, power: 302 kW (410.61 HP), first registration: 08/2006, fuel type: diesel, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, number of seats: 2, Year of construction: 2006, Equipment: retarder, Number of doors: 2 Cab: XXL Fpjdpfx Ajzt N R Aekyen Number of cylinders: 6 GVW: 26.000 kg Make of engine: D28 66LF 320 Number of beds: 2 Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Fjdsz Imr Rjpfx Akyjpn ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Fpsdpfjz Rlkxjx Akyen Thread cutting | steel M42 Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Base dimensions 600 × 520 mm Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet Fpjdpfsybtnvox Akysn - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: used, power: 150 kW (203.94 HP), first registration: 10/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2008, Equipment: spoiler, tail-lift, = Additional options and accessories = - Roof spoiler = Remarks = Polywood box 6.05 m – Palfinger tail lift – 3 seats – Gross weight 7500 kg – Unladen weight 5180 kg – Wheelbase 4200 mm – = Further information = Suspension: Leaf suspension Front axle: Steered Fpedpfxjxxg Aaj Akyen Unladen weight: 5,180 kg Payload: 2,320 kg Gross vehicle weight: 7,500 kg Tail lift: Palfinger, column lift Reference number: 60 Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), mileage: 626,000 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,180 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,650 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, electric window regulation, power mirror, spoiler, tail-lift, traction control, = Additional options and equipment = - Heated mirrors - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sun visor - Toolbox = Remarks = M.A.N. TGM18.250BL 4x2 CHASSIS WITH PLYWOOD BOX, D'HOLLANDIA DHLM 1,500 KG TAIL LIFT, AS-TRONIC GEARBOX & AIR CONDITIONING (ENGINE PROBLEM!!) 250HP, EURO 5, 6 CYLINDER ENGINE!! (ENGINE PROBLEM!!) AS-TRONIC GEARBOX!! AIR CONDITIONING!! SUN VISOR!! ROOF SPOILER!! ETC.!! MULDER PLYWOOD BOX: DIMENSIONS: LENGTH x WIDTH x HEIGHT: approx. 7.65 m x 2.48 m x 2.65 m (INTERNAL)!! D'HOLLANDIA DHLM 1,500 KG TAIL LIFT!! SIDE DOOR ON RIGHT SIDE!! STAINLESS STEEL TOOLBOX!! ETC!! TRUCK HAS ENGINE PROBLEM AND IS NOT DRIVEABLE, WE CAN TRANSPORT THIS TRUCK FOR YOU!! MORE M.A.N. 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE: SHIPPING, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US! WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (?v=G1cTWpn_7kQ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine capacity: 6,871 cc Transmission Gearbox: AS-TRONIC, 6-speed, automatic Axle configuration Tyre size: 315/70R22.5 Fpedpfxoyfhure Akyjn Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle: Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,765 kg Payload: 10,235 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D'HOLLANDIA DHLM 1500, tailgate, 1,500 kg Superstructure make: MULDER PLYWOOD BOX WITH LOADING PLATFORM Loading platform height: 110 cm Condition Technical condition: good Optical condition: very good Identification Registration: BZ-TL-02 Further information Please contact Sales Department or Erik Engel for more information.

Condition: excellent (used), mileage: 368,500 km, power: 180 kW (244.73 HP), first registration: 03/2012, fuel type: diesel, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, loading space length: 5,700 mm, loading space width: 2,430 mm, loading space height: 2,400 mm, Year of construction: 2012, Equipment: tail-lift, Refrigerated truck MAN TGL 8.180 First registration: 23.03.2012 Mileage: 368,500 km Automatic transmission Emission standard: 5 Refrigeration unit: Carrier Supra 950 MT Drive: Diesel & Electric Refrigerated compartment with 2 chambers Length: 5.7 m Height: 2.4 m Wheelbase: 4.2 m Unladen weight: 6,160 kg Total weight: 8,800 kg Tread depth, front tires: approx. 45% Tread depth, rear tires: approx. 75% Brake pads, front: 50–54% Brake pads, rear: 56–57% Equipment: Automatic climate control On-board computer Central locking Cruise control Electric windows and exterior mirrors Air suspension, rear .... Cevoman bv. Lenskensdijk 5 Fedpfx Aszl Ttxskyspn 2200 Herentals Belgium

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Fedsz Eht Depfx Akyjpn Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: ready for operation (used), A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement. Fpjdpfx Aozrzpbskyjn

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/2003, loading space length: 13,480 mm, loading space width: 2,490 mm, loading space height: 2,610 mm, total length: 13,780 mm, total width: 2,550 mm, suspension: air, tire size: 425/65, wheelbase: 8,860 mm, color: other, Year of construction: 2003, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles - Steering Axle - Tailgate = More information = Axle configuration Tyre size: 425/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Fedoz Imhfjpfx Akyepn Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Weights Empty weight: 9.100 kg Carrying capacity: 22.900 kg GVW: 32.000 kg Functional Tail lift: D`Hollandia, slider lift Identification Registration number: OH-84-BL

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2001, loading space length: 13,490 mm, loading space width: 2,540 mm, loading space height: 2,640 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 3,950 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,110 mm, color: white, Year of construction: 2001, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Mercedes-Benz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Fodpfx Aez Hu I Rekyjpn Weights Empty weight: 8.800 kg Carrying capacity: 30.200 kg GVW: 39.000 kg Functional Tail lift: AMA Stama 20 UF, slider lift, 2000 kg Make of bodywork: Pacton Plywood Box History Number of owners: 1 Condition General condition: moderate Technical condition: moderate Visual appearance: moderate Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, System: used piston diaphragm pump / pump Fsdpedkdi Tofx Akyepn Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: excellent (used), power: 213 kW (289.60 HP), first registration: 10/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro4, number of seats: 2, loading space length: 7,730 mm, loading space width: 2,500 mm, loading space height: 2,720 mm, Year of construction: 2007, Equipment: air conditioning, cruise control, power mirror, spoiler, = Additional options and accessories = - Aluminum fuel tank - Enhanced engine brake - limited slip differential - Radio/CD player - Roof Spoiler - Sun visor - Toolbox = Remarks = Tailgate Plateau length: 275 cm = More information = General information Number of doors: 2 Cab: single Registration number: XUA712 Technical information Engine capacity: 6.374 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 9.445 kg Carrying capacity: 9.555 kg GVW: 19.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Fjdez Nhamspfx Akyopn Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: repair required (used), functionality: not functional, Year of construction: 2014, Paper Spike 2 G, typ 2000, Dimensions of machin 2850 x 2350 x 2000mm (L x W x H). weight 2800 kg Fedpfxszzzq Rj Akyjpn

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Fpsdpfxezt Ih Ts Akyon Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Fsdjz Hqw Ijpfx Akyjpn Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Indramat 2G 1014 IR-B3-2506 H2 DC servo motor SN 66646 B 044 + fan, used, minor signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fpodsrwtybepfx Akyjn

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Centering table CPRC-600, length 1.2 m - Length: 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multi-blade saw type RP-500-G, max. cutting height 160 mm - Saw shaft drive motor 55 kW, feed motor 2.2 kW (stepless speed adjustment - inverter) - Chip collection conveyor belt - Strong lateral pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70) - Maximum thickness of cut material (cant): 160 mm - Minimum thickness of cut material: 50 mm - Minimum length of cut material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction: automatic pneumatic chip extraction, extraction socket Ø 250 mm - Lower chip extraction + belt + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2100 (2600) mm - Machine width: 2080 mm - Machine height: 1800 mm - Machine weight: 2200 kg Fsdpfxjynkgij Akyjpn - Machine’s productivity: 6-10 m³/h - Machine does NOT include saw blades - Power consumption approx. 62 kW 3. Outfeed conveyor DPTOZ-100 for ripped boards - Length: 4 m - 2 cross chains 4. Cross chain conveyor for sorting and picking boards - Width: 1 m - Length: 2.5 m Very little used. Like new. TOP condition.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 221005, functionality: fully functional, Technical Data – AICHELIN Pusher Furnace System Manufacturer: AICHELIN Type: DHLG-50/50/50 System Type: Gas-heated Pusher Furnace Year of Construction: 2012 (system) Control System: Siemens S7-400 Machine No.: 221005 Electrical Data Connected Power: 261 kW Rated Current: 383 A Supply Voltage: 400 V / 50 Hz Furnace Data Heating: Natural Gas Max. Furnace Temperature: 500 °C Protective gas operation possible Continuous pusher operation Batch Data Max. Batch Weight: 10,000 kg Continuous heat treatment of large series components Application Area Hardening Tempering Stress-relieving annealing Preheating Heat treatment of forged and cast parts Gearbox and drive components Equipment Siemens S7-400 control system Automatic loading and pusher system Gas-heated industrial furnace Protective gas atmosphere possible Fully automatic series operation Typical Applications Automotive industry Forging operations Gearbox manufacturers Heat treatment companies Fpedpfjzf Upnex Akyon Supplier industry Special Features Very high batch capacity of up to 10 tons Modern Siemens PLC control system Energy-efficient gas heating Suitable for high production volumes in 3-shift operation Ideal for the heat treatment of gearbox parts, shafts, gears, and forged parts This AICHELIN DHLG-50/50/50 is a modern industrial heat treatment system and is significantly more valuable than a comparable standard tempering or chamber furnace. The system is particularly interesting for forging companies, gearbox manufacturers, foundries, and contract heat treatment companies.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2007, total length: 14,040 mm, total width: 2,600 mm, suspension: air, wheelbase: 8,980 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Steering Axle = More information = Axle configuration Fodpfez Imhljx Akyepn Make axles: BPW Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg; Steering Weights Empty weight: 9.700 kg Carrying capacity: 32.300 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: OJ-39-SV

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2006, loading space length: 13,540 mm, loading space width: 2,530 mm, loading space height: 2,520 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, wheelbase: 8,860 mm, color: other, Year of construction: 2006, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes - Steering Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg; Steering Weights Empty weight: 9.260 kg Carrying capacity: 32.740 kg GVW: 42.000 kg Functional Tail lift: slider lift Identification Fpjdpfx Ajz Hctbokyon Registration number: OJ-63-NV