Used 2006 Vettorel Stv Fc for sale (1,824)

Condition: used, Year of construction: 2006, Programmable automatic stretcher, for small furniture or furniture components, brand Vettorel Silverio, model STV FC. Year of construction 2006 CE marked. Used. Cedpszcpydsfx Ailjrh

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. Crjdez Efwyepfx Ailoh The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 134N1391, input voltage: 400 V, input current: 381 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP21, year of last overhaul: 2026, continuous power: 200 kW (271.92 HP), Equipment: type plate available, Exact model designation: Danfoss FC-102N200T4E2MH4XLCXXXSXXXXA0BXCXXXXD0 Output power and output current: 200kW | 395A 134N1391 ° Includes inspection seal! ° Only 1.293 motor operating hours – manufacturer rating allows for over 100,000! ° Easy operation via integrated control panel Cjdpfxez Hydds Ailsrh ° Rapid parameter setup possible thanks to Quick Menu ° Original operating manual for commissioning included Only 5 units left in stock! The item has been reset to factory settings and is therefore in its original condition as supplied by the manufacturer. Please refer to the original product photos for its visual condition. Fully functional and ready for immediate use.

Condition: like new (used), Year of construction: 2024, operating hours: 300 h, Kaeser EBS 410 CL SFC screw blower with a 37 kW motor. Cedpfoz I R Iisx Ailorh Energy-efficient. 41 m3/min, 600 mbar.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional Crodpfx Aezgw Eboiloh • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation Csdpfx Asy Au Aleilsrh • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Crjdjzyfvuepfx Ailoh Model: VAC-100a + VAC-100m × 4 Towers Year of Manufacture: 2010 Number of Towers: 5 Towers Number of Stations: 50 Bins * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: like new (used), functionality: fully functional, back gauge: 750 mm, overall weight: 3,500 kg, total length: 2,800 mm, total width: 1,900 mm, total height: 1,660 mm, number of support arms: 3, year of last overhaul: 2019, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO TS 2006 in very good condition Working length: 2050 mm Capacity in regular steel: 6 mm (400 N/mm²) Length of back gauge: 750 mm Control: SP-9 motorized back gauge with digital display Blade gap: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of clamps: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side gauge 1500 mm including ball bearings Equipped with a sheet support device: No Working height: 770 mm Motor power: 7.5 kW Total length: approx. 2800 mm Cjdpezxgupofx Ailerh Total height: approx. 1660 mm Total width: 1905 mm Weight approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Cedpfx Aoxpm Iqoiljrh Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs.

Condition: excellent (used), Year of construction: 2006, Double finisher 842 Multimatic with control system, year of manufacture 2006, original price €20,110   Garment former and trouser topper rotatable on a single column Finishing process in a closed cabin Integrated cabin extraction system with automatic control Doors close automatically Flexible processing of various garments and sizes Computer control with nine freely programmable memory slots Airflow regulation for particularly delicate garments Space-saving and minimal impact on the working environment due to the finishing process Heated by external steam or fully electric with a built-in electric steam generator   Are you looking for an all-rounder for jackets and similar items? - Multimatic double finisher 842   With the Multimatic double finisher 842, jackets, blazers, coats, trousers, and similar items can be automatically finished. It consists of a form finisher and a trouser topper. The two devices are rotatable and mounted on a single column. For finishing, the previously loaded element (form finisher or topper) is swiveled into a cabin. The doors close automatically, and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low noise, small footprint. Year of manufacture 2006, original price €20,110 The machine is in perfect working order.   You can find more items - new and used - in our shop! International shipping costs on request! Csdpfxsgtiddo Ailjrh

Condition: used, Year of construction: 2006, Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment Crodpfez Hb Nusx Ailsh - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors - CE marked Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview Cedpfx Aoz Hcivjilerh This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment Crjdez Hckmspfx Ailoh - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Crsdpfsz Hbxijx Ailjh Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: MBK 12 AS - Year of manufacture: 2006 - Machine type: capsule placing and shrinking machine - Output: 3,000 - 12,000 bottles/h - Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm - Head diameter: 33 mm - Heating stations: 12 - Capsule magazine: 1,800 capsules - Bottle height: 235 - 360 mm - Bottle diameter: 50 - 115 mm - Working height: 1,100 mm (+/- 50 mm) - Direction of travel: left to right - Power supply: 400 V, 50 Hz; main drive 0.75 kW - Compressed air: 6 - 7 bar, approx. 350 l/min - Overall dimensions (L x W x H): 3,700 x 2,500 x 2,580 mm - Weight: approx. 1,400 kg Equipment - Capsule magazine with multi-level storage shelves and capsule feed - Rotary capsule placing turret - Rotary shrinking turret with 12 heating stations - Bottle infeed and outfeed on slat chain conveyor with guide rails - Siemens touch panel (French, Dutch, German) with fault list, emergency stop and signal tower - Control cabinet with PLC - Stainless steel frame, enclosure with transparent guard doors Cjdpfx Aisz Hbzkslsrh - CE marked; operating manual with spare parts list available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, load capacity: 180 kg, arm reach: 3,100 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. Codpfszpxxbox Ailorh We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending Brand: KUKA Model: KR 240 L180-2 2000 Year: 2006 Control Cabin: KRC2 ED05 Rated Payload: 180kg Access Distance: 3100mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Shipping: NOT included in the price Payment: 100% payment prior to collection Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 190 x 421 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 6: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1800 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - System/software: Memory System - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 130 - Options: Automatic feeding system - Feed speed: Automatic Csdozl Tvajpfx Ailorh - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 30 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cedpfx Aiozry N Tslorh Yorick Diebels

Condition: used, Year of construction: 2006, 5 Positions Digital positioning Crsdpfxez Ha Dwj Aileh Universal tree

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc Crjdpjy Uwg Rjfx Ailoh This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, Controll : CC200 Clamping force: 260 t Screw dia: 40 mm Type: Multicomponent Drive: Hydraulic Crsdpfx Aozu Smieileh Rotary table Machine is including robot and conveyor belt Robot: Engel ERC 23/1-F machine is in excellent condition

Condition: used, Year of construction: 2006, Panel saw Manufacturer: Altendorf Type: F45 Credpfx Ajz E Rnqjiljh Year of manufacture: 2006 Technical data Saw blade diameter: max. 500 mm Main motor power: 5.5 kW Scoring motor: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, mileage: 211,658 km, power: 115 kW (156.36 HP), first registration: 06/2006, fuel type: diesel, empty load weight: 2,115 kg, maximum load weight: 1,385 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 5,200 mm, total width: 2,300 mm, total height: 2,200 mm, displacement volume: 2,685 cm³, nominal power: 115 kW (156.36 HP), Equipment: ABS, EBS, USB port, electronic stability program (ESP), power mirror, Key Features Internal Reference: 26280M Chassis Number: WDB 904 612 1R8 780 86 Serial Number: 663.110.986 Vehicle Model: 416 CDI 4x2 / Swiss Vehicle Vehicle Make: Mercedes-Benz Product Category: Semi-trailer tractor unit Condition: Used Mileage: 211658 Emission Standard: Euro 3 Date of First Registration: 06/30/2006 Last inspection (MFK or TÜV): 03/26/2024 Fuel: Diesel Overall Vehicle Condition: Used Engine Displacement (ccm): 2685 Engine Power: 156 Transmission Type: Manual Suspension: Steel-Steel Cab Vehicle Equipment: ABS, CD player, EBS, Electric mirrors, ESP, Radio, USB interface Number of Seats: 3 Air Conditioning: No air conditioning Axles & Tires Axle Configuration: 4x2 Axle 1: 195/70 R15c/3mm, Disc brakes, Leaf spring suspension Axle 2: 195/70 R 15c/4mm, Disc brakes, Leaf spring suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 3500 Gross Train Weight: 6600 Payload: 1385 Unladen Weight: 2115 Vehicle Wheelbase: 3700 Cedpfjz Hpd Tjx Ailsrh Vehicle Height: 2200 Vehicle Length: 5200 Vehicle Width: 2300

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Colour: Grey Empty weight: 3.500 kg Dimensions (LxBxH): 180 x 358 x 184 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 Crsdpfxezguqzj Aileh - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Equipment - Heidelberg Suprasetter A52/A74 - Thermal CtP technology - Integrated plate punching system - Heidelberg MetaShooter software - Included: 3 prepress/workflow computers - Plate formats up to 745 × 605 mm - including Agfa Azura C85 plate processor Credsz Dh Rgopfx Ailjh Counters - Total plates: approx. 55,764 - Total exposures: approx. 56,673 - Total punchings: approx. 55,568 - Total imaging time: approx. 3,728 hours Software - RIP Prinect Meta Dimension - Heidelberg MetaShooter - Prinect Signastation - RIP/workflow system installed on the included computers Available at short notice