Used Zikun Zk-Ad2-B1B1-Tf2Fl for sale (393)

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims Ndodpjzp Ak Ujfx Af Sjb - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Condition: good (used), Year of construction: 2006, functionality: fully functional, Rated power consumption 3000W (Cuprex high-performance motor), rated voltage 230V 50Hz, rated no-load speed 4050 rpm, milling head 15 x 115 x 30 mm, cutting depth 0-70 mm (83.5 mm), swivel range 0-60°, weight approx. 20 kg, cutting speed 31.8 m/s. Nedpfx Afjzvyb Do Sedb

Condition: used, maximum load weight: 14,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, next inspection (TÜV): 06/2027, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2003, Equipment: ABS, Well-maintained Kögel ZK 18 tandem tipping trailer. Equipment: SAF axles Ndodpfx Afsz Efdtj Sjb Air suspension Steel sideboards Steel tailgate Foldable underride guard LED reversing lights Platform at the front wall For any questions regarding the equipment, please call. The tipping body can be painted in your desired color for an additional charge! Errors and prior sale excepted.

Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible. Nedpfswdwztox Af Sodb

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 681852N, total length: 2,200 mm, total width: 1,450 mm, total height: 1,550 mm, Size: 360 x 520 mm Availability: in stock Total impressions: 49.7 million Estimated model year: 1983 Status: discontinued in 2025 Maximum sheet size: 360 x 520 mm Nsdpfx Ajz D Ernef Ssdb Minimum sheet size: 105 x 180 mm Maximum speed: 8,000 sheets/hour Printing units: 2 Total weight: 2,850 kg Includes: 2 x Varn Kompac III, automatic, continuous dampening system Eltek elektrostat P22

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Ndjdpfx Asz D Autof Seb Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ Nsdpfx Aey A H Umjf Sodb • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, Müller Martini Corona, (~2005), complete clamping unit, for a machine with a maximum speed of 18,000 units/hour. - Part numbers: 3010 1011 9 and 3010 1013.9 The entire clamping unit is available for sale as a spare part. Ndjdpez Au I Ejfx Af Sjb

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller Ndedoziciwspfx Af Sjb KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: used, mileage: 297,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm Nodez Al Tfjpfx Af Sedb * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire: 40-50%, 2nd tire: 60% * Diesel tank * AD-Blue tank (plastic) * Two-line system * ABS / 15-pole * 2x fire extinguisher holders Cab: * Classic Space S * 2 seats * Spoiler * Air conditioning * Radio * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Reversing camera Body: * Zikun Fahrzeugbau beverage box truck * Bär BC1500 S4B4 * Max. 1,500 kg * Support legs on both sides * 2x cargo securing bars per side * 4x cargo securing bars at the top and bottom * 4x cargo securing beams * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40 m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: * 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Unladen weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New MOT (technical inspection) possible upon request ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, transport of your purchased vehicles within Germany is possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and mistakes; subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Daytime license plates / export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you handle customs matters.

Condition: used, mileage: 297,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire ~40-50%, 2nd tire 60% * Diesel tank * AD-Blue tank, plastic * Two-line brake system * ABS / 15-pin connector * 2x Fire extinguisher bracket Cab: * Classic Space S * 2 seats * Spoiler Ndjdpfsz Al S Usx Af Sob * Air conditioning * Radio * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Rear view camera Body: * Zikun Fahrzeugbau beverage box * Bär BC1500 S4B4 * Max. 1,500 kg load capacity * Support legs on both sides * 2x Load securing bar per side * 4x Load securing bar on top and bottom * 4x Load securing beam * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Tare weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New technical inspection (TÜV) available upon request ---- New technical inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typographical errors, changes, prior sale, and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, Offered: Sinker EDM machine genius750NOVA + connection Chameleon Linear - 120 electrode positions - 6 pallet positions 400x400 Sinker EDM machine genius 750 NOVA Right-hand configuration Control panel on the right, automation possible from the left side! * Travel ranges X * Y * Z: 420mm * 420mm * 400mm * Work table: 600mm * 600mm * Work table T-slots: number / width / spacing: 6 slots / 10mm / 83/100/100/100/83 * Controlled C-axis with n = 45 1/min * High retraction speed due to acceleration of 10 m/s² in Z and 20 m/min travel speed Generator * genius IPMtec, with comprehensive technology package for graphite, copper, and tungsten copper for machining all materials commonly used in tool and mold making * max. working current 52A, optional 100A or 196A (with 96A booster) Control system * Internal control computer with 1.2 GHz RISC CPU, 64-bit * Industrial PC with user interface, based on Win 10 * 22“ touchscreen, keyboard, mouse and handheld unit for setup with joystick, handwheel and touch display * Connections: LAN, USB, RS-232 Connection values * Electrical: 6 kVA, 400V, 50Hz * Pneumatic: 6 bar, 10 l/min * Required cooling capacity: 4.5 kW for cooling of dielectric fluid and control cabinet Chameleon base unit consisting of: * Robot * ZK’s own robot controller * 1 guide rail * 1 base magazine without magazine levels with rack and pinion drive Chameleon expansion magazine Nodpfezzawpsx Af Sjdb including base plate and glass sliding door set (magazine positions not included)

Condition: used, mileage: 156,025 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 134 MERCEDES-BENZ SPRINTER 315 HIGH + LONG Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF7 Fabric Maturin black Equipment: * 212L Berlin * 9147 Paint color Arctic White MB 9147 * AI1 Control code rear axle ring gear 215 * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydraulic aggregate variant 7 * BK1 Control code wheel brake configuration 1 * C6L Multifunction steering wheel * C907 - * CB8 Stabilization level II Ndjdpfx Afoz Exu Ss Sob * CL1 Steering wheel adjustable in inclination and height * CW2 Omission of vehicle lowering * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E1E Navigation * E1G Live Traffic capability * E1U USB socket 5 V * E2N Control of Pro features in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - locking automatic transmission * ES0 Jump start contact * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors heated and electrically adjustable * F907 - * FF4 Storage compartment above roof liner * FF5 Storage compartment above windshield * FJ4 Storage compartment under dashboard * FKA Box van * FY7 Multi-button remote control * G43 9G-Tronic * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (BM-defining code) * IT4 3.5-tonner * J10 Speedometer km/h * J58 Seatbelt warning system for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI7 Start-up mileage maintenance interval 60000 km * K13 Main tank 71 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * L65 Dome light in loading/passenger compartment with door contact * L94 Omission of parking light * LA2 Driving light assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in loading area * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MJ8 ECO start-stop function * MT2 Emission class Euro 6D-TEMP N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * Q11 Longitudinal member reinforcement * Q67 Towing eye rear * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel rims 6.5 J x 16 * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S25 Armrest for passenger seat, center armrest at the rear (FFO) * S87 Driver's seat console, low * SA5 Airbag driver * SB2 Passenger seat comfort * SB3 Driver's seat sprung seat * SK2 Seat occupancy recognition driver's seat * T16 Sliding door right * T77 Grab handle at the entrance of the loading area sliding door on partition * T86 Grab handle on rear corner pillar right * V42 Tie-down rails side wall on bulwark strap * V43 Wooden floor * V94 Cable duct on side wall * V95 Cable duct on rear portal * VA2 Interior lining loading area up to roof height (wood)

Condition: used, mileage: 156,025 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 134 MERCEDES-BENZ SPRINTER 315 HIGH + LONG Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF7 Fabric Maturin black Equipment: * 212L Berlin * 9147 Paint color Arctic White MB 9147 * AI1 Control code rear axle crown wheel 215 * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydraulic unit variant 7 * BK1 Control code wheel brake configuration 1 * C6L Multifunction steering wheel * C907 - * CB8 Stabilization level II * CL1 Steering wheel adjustable in inclination and height * CW2 Omission of vehicle lowering * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E1E Navigation * E1G Live Traffic Capability * E1U USB socket 5 V Ndjdpfx Afoz Exvce Seb * E2N Control of Pro functions in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - Locking automatic transmission * ES0 Jump start contact * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors, heated and electrically adjustable * F907 - * FF4 Storage compartment above roof lining * FF5 Storage compartment above windshield * FJ4 Storage compartment under dashboard * FKA Box van * FY7 Multi-button remote control * G43 9G-Tronic * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic market (Germany) * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (BM-generating code) * IT4 3.5-tonner * J10 Speedometer km/h * J58 Seatbelt warning system for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI7 Start-up mileage maintenance interval 60000 km * K13 Main tank 71 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * L65 Dome light in the loading/passenger compartment with door contact * L94 Omission of parking lights * LA2 Driving light assistant * LB1 Lateral marker lights * LB5 3rd brake light * LC2 LED light strip in the cargo area * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MJ8 ECO Start-Stop function * MT2 Emissions class Euro 6D-TEMP N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * Q11 Longitudinal member reinforcement * Q67 Towing eye rear * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * S22 Armrest for driver's seat, ISO-fix (child seat fastening system) * S25 Armrest for passenger seat, center armrest rear (FFO) * S87 Driver's seat box, low * SA5 Airbag driver * SB2 Passenger seat comfort * SB3 Driver's seat suspension seat * SK2 Seat occupancy recognition driver's seat * T16 Sliding door right * T77 Handrail entry loading area sliding door at partition * T86 Entry handle on rear right corner pillar * V42 Lashing rails sidewall on partition belt * V43 Wooden floor * V94 Cable duct on sidewall * V95 Cable duct on rear portal * VA2 Interior paneling cargo area up to roof height (wood)

Condition: used, mileage: 386,677 km, power: 260 kW (353.50 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,380 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Mercedes-Benz Actros 1835 4x2 | Zikun Beverage Box Body | Bär LBW | MirrorCam | ACC | Onspot VIN: W1T96300310447612 CHASSIS / COMPONENTS * 4x2 * Leaf / Air Suspension * Wheelbase: 5,500 mm * ABS * 2-line pneumatic connection * ABS trailer connection * 15-pole electrical connection * 1x PVC storage box * 1x Aluminum diesel tank, approx. 290 liters * AdBlue tank, plastic * Automatic snow chains / Onspot * 2x Fire extinguisher holders BODY * Zikun Beverage Box Body * Side swing doors, right and left * Bär Rear Liftgate Type BC1500 SE * Multiple locking rods for load securing * Tie-down points * Rear view camera Cargo area dimensions approx.: * Length: 7,380 mm * Width: 2,460 mm * Height: 2,200 mm * Volume: approx. 39.94 m³ TIRES * 315/70 R22.5 * Front axle: Remaining tread approx. 40 / 40 % * Rear axle: Remaining tread approx. 20 / 20 % ENGINE / TRANSMISSION * 260 kW / 354 hp // 7,698 cm³ // Euro VI D * Automatic transmission * Engine brake CABIN / DRIVER'S CAB * StreamSpace cab * Automatic climate control * MirrorCam * Navigation * Cruise control * Adaptive cruise control * PPC ? Predictive Powertrain Control * Lane keeping assist * Turning assistant * Hill start assist * Hands-free system * Radio * AUX * USB * Bluetooth * Multifunction steering wheel * Electric parking brake * Sunroof * Spoiler WEIGHTS Ndodpfsz Al Suox Af Sjb * Permissible total weight: 18,000 kg * Tare weight: 9,520 kg * Payload: 8,480 kg OTHER * Color: White * Year of manufacture: 2020 * First registration: 07/14/2020 * Mileage: 386,677 km * MOT: 07/2027 * Inspection: 01/2027 * Tachograph test valid until: 07/09/2027 ----New MOT/inspection as well as weight reductions or increases are available upon request.----We will not leave you alone even after the purchase: We will help you with obtaining export or short-term license plates. A transfer of your vehicle within Germany is also possible. Just contact us – we will be happy to help you! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and spelling errors as well as prior sale.----About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. For us, it is not only the vehicle that counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we will personally and reliably support you – from the first contact to the handover of your vehicle. Be convinced for yourself. We look forward to your inquiry!----Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will help you with obtaining export or short-term license plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle transfer If desired, we will organize a transfer of your vehicle within Germany.

Condition: used, mileage: 386,677 km, power: 260 kW (353.50 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,380 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Mercedes-Benz Actros 1835 4x2 | Zikun Beverage Box Body | Bär LBW | MirrorCam | ACC | Onspot VIN: W1T96300310447612 CHASSIS / COMPONENTS * 4x2 * Leaf / Air Suspension * Wheelbase: 5,500 mm * ABS * 2-line pneumatic connection * ABS trailer connection * 15-pole electrical connection * 1x PVC storage box * 1x Aluminum diesel tank, approx. 290 liters * AdBlue tank, plastic * Automatic snow chains / Onspot * 2x Fire extinguisher holders BODY * Zikun Beverage Box Body * Side swing doors, right and left * Bär Rear Liftgate Type BC1500 SE * Multiple locking rods for load securing * Tie-down points * Rear view camera Cargo area dimensions approx.: * Length: 7,380 mm * Width: 2,460 mm * Height: 2,200 mm * Volume: approx. 39.94 m³ TIRES * 315/70 R22.5 * Front axle: Remaining tread approx. 40 / 40 % * Rear axle: Remaining tread approx. 20 / 20 % ENGINE / TRANSMISSION * 260 kW / 354 hp // 7,698 cm³ // Euro VI D * Automatic transmission * Engine brake CABIN / DRIVER'S CAB * StreamSpace cab * Automatic climate control * MirrorCam * Navigation * Cruise control * Adaptive cruise control * PPC ? Predictive Powertrain Control * Lane keeping assist * Turning assistant * Hill start assist * Hands-free system * Radio * AUX * USB * Bluetooth * Multifunction steering wheel * Electric parking brake * Sunroof * Spoiler WEIGHTS Nedpoz Al R Rofx Af Sjdb * Permissible total weight: 18,000 kg * Tare weight: 9,520 kg * Payload: 8,480 kg OTHER * Color: White * Year of manufacture: 2020 * First registration: 07/14/2020 * Mileage: 386,677 km * MOT: 07/2027 * Inspection: 01/2027 * Tachograph test valid until: 07/09/2027 ----New MOT/inspection as well as weight reductions or increases are available upon request.----We will not leave you alone even after the purchase: We will help you with obtaining export or short-term license plates. A transfer of your vehicle within Germany is also possible. Just contact us – we will be happy to help you! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and spelling errors as well as prior sale.----About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. For us, it is not only the vehicle that counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we will personally and reliably support you – from the first contact to the handover of your vehicle. Be convinced for yourself. We look forward to your inquiry!----Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will help you with obtaining export or short-term license plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle transfer If desired, we will organize a transfer of your vehicle within Germany.

Condition: like new (used), functionality: fully functional, power: 340 kW (462.27 HP), first registration: 11/2025, fuel type: diesel, tire size: 385/55-315/70-385 /55r22.5, color: white, driver cabin: other, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: parabolic leaf (spring), total length: 11,800 mm, total width: 25,500 mm, total height: 31,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 8,000 kg, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, airbag, electric window regulation, fog lights, full service history, onboard computer, parking air conditioner, power mirror, retarder, tachograph, tire pressure monitoring, trailer coupling, ALL TECHNICAL DETAILS CAN BE FOUND IN DETAILED FORM IN THE ATTACHMENT Ndjdpfx Asy H Ht Djf Sob

Condition: repair required (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 65123, For sale: Mazak QT 10N with Knoll chip conveyor. The machine and chip conveyor are functional, but the X-axis needs to be overhauled and is currently not in operating condition. The price is a fixed price and non-negotiable. Nodpfx Aswn D Nfsf Ssdb

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding Nsdpfx Afezv Eaxo Ssdb We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MMFE 422132/35, Müller Martini 3631 CB-16, manufactured in 2001, compensating collator and stacker designed for the automatic stacking of bound books and printed materials. Njdpfx Afoz Dftfs Sodb Maximum size: 450 x 340 mm (varies by model version, up to 470 x 320 mm) Minimum size: 140 x 100 mm Product thickness: 3–70 mm Maximum speed: Up to 18,000 pieces per hour The machine is currently in production. The CPU battery needs to be replaced. After purchase, the machine will be dismantled and prepared for delivery. Please do not hesitate to contact us for more information.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,083 h, controller manufacturer: FANUC, This 3-axis FANUC ROBODRILL alpha-D21LiA5 was manufactured in 2015. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a weight of 2200 kg and is equipped with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL alpha-D21LiA5 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 2200 kg • X-Axis: 700 mm • Y-Axis: 400 mm Nsdsz Akuuopfx Af Ssdb • Z-Axis: 330 mm • Main electronic connection: 200/220 V, 3-phase, 50/60 Hz • Power consumption: 10 kVA • Machine type: CNC Vertical Machining Center • Year: 2015 • Made in: Japan • Serial number: P157YH978 • Tool measurement: Blum laser tool measurement system with A2 reference • Workpiece measurement: Renishaw OMP probe

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours • Table size: 575 x 500 mm • Max workpiece weight: 700 kg • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots Njdpfx Aeyip Arsf Sodb • 9 UPC pallet slots with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: excellent (used), Year of construction: 2019, operating hours: 8,255 h, functionality: fully functional, We are offering a system consisting of two ZK Genius 700 wire EDM machines, complete with the associated Chameleon Quad automation system. Due to changes in our product portfolio, these machines are no longer required for our wire EDM capacity. The complete system is in very good used condition. 1x ZK Genius 700, manufactured in 2015, with 22,056 operating hours 1x ZK Genius 700, manufactured in 2019, with 8,255 operating hours • Travel range: 400 x 350 x 350 mm • Table: 575 x 500 mm Nedpjzwt Erefx Af Sodb • Workpiece weight: 700 kg • 96 Ampere generator capacity • Controlled C-axis and rotating spindle • CO/2 fire extinguishing system from Kraft & Bauer and extraction system • C-module for hard metal, PCD, or etching applications • O-module for very fine surface roughness • CIMCO editor for path-controlled wire EDM 1x Chameleon Quad, manufactured in 2015 • 176 electrode positions • 9 UPC pallet positions with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: used, mileage: 176,339 km, power: 9,134 kW (12,418.77 HP), first registration: 03/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 6,400 mm, fuel: diesel, brakes: engine braking, color: other, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,980 mm, total width: 2,520 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Additional options and accessories = - Lift axle - Air suspension - Fifth wheel coupling - PTO - Radio - Reversing camera - Sun visor - Toolbox = Notes = Crane: HMF 1943Z. High-level operation. Additional function for operating the container from the high-level platform. Bakker gripper 100 cm / 500 ltr. Hyva hook system. 26,000 kg. 540 cm. Distance from hook to bumper: 575 cm. Ringfeder hook: 40 mm. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steerable; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Nedpfez Er S Dox Af Sodb Rear axle 3: Tire size: 385/65R22.5; Steerable; Tire tread left: 80%; Tire tread right: 80%; Suspension: Air suspension Weights Unladen weight: 16,180 kg Payload: 19,820 kg GVW: 36,000 kg Functional Crane: HMF Maintenance MOT (Technical Inspection): valid until 04.2027 Financial information Price: On request Identification Model number: TGS 35.430 8x4-4 BL / HOOK ARM + = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, axle configuration: 2 axles, Year of construction: 2008, Carrying capacity: 22.000 kg VAT/margin: VAT qualifying Nsdpezbl Axofx Af Sodb