Used Son Schneepflug Spr 280 for sale (6,248)

Condition: used, Year of construction: 2011, _____used snowplow SON SPR 280 Year of manufacture 2011 Weight 790 kg The present used machine/device is sold with exclusion of liability for material defects. This does not apply in cases of intent, gross negligence and in the event of personal injury. Location: Hengersberg Cjdpfx Asyq Arcskcsrb

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, center height: 140 mm, spindle bore: 38 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, overall weight: 650 kg, total height: 1,650 mm, total length: 1,600 mm, total width: 1,000 mm, 3 Phase 380V motor is running smoothly! Both CNC & conventional turning are possible. Original Harrison CNC software installed. Geared headstock, gears run in oil bath. 9 spindle speeds adjustable from 52 up to 2000 RPM. Power feeds in both longitudinal and cross-slide directions. Norton gearbox for easy thread cutting. Csdpsywctnsfx Akcerb Quick change toolpost with a total of 4 holders included. MT3 tailstock taper. Camlock D1-3 spindle nose. Machine light, coolant pump integrated in base, chuck safety guard, and JOG mode included. Distance between centers: 800 mm Center height: 140 mm Spindle bore: 38 mm Made in the UK. Very good overall condition! Overall dimensions: 160 x 100 x 165 cm Weight: 650 kg Year of manufacture: 1992 Ex-college machine. We have the original (very rare!) power indexing 6-station turret set available for sale separately—see last 7 pictures. This turret is not included in the listed price but can be purchased additionally for €500.00 The turret set includes: - Original Harrison T280 turret - Original Harrison T280 turret control card (to be installed in the electrical cabinet) - Original turret activation button Includes accessories as shown in the pictures. Contact us for shipping options! €4,750.00

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Crsdpswmpcnefx Akcsb Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – COMPLETE INDUSTRIAL SAWMILL LINE (EWD / SPRINGER / MICROTEC) High-performance, fully integrated sawmill plant featuring an EWD saw line for efficient industrial log processing. The system combines proven technology with continuous upgrades and is in excellent working condition. Cutting capacity: approx. 120,000 m³ roundwood per year The plant has been regularly serviced, professionally maintained, and is still partially in operation. Inspection during running production is possible by arrangement at any time. Availability: approx. June 2026 Scope of supply Log yard (infeed & preparation): • Sorting, measurement, and debarking line – SPRINGER (Year 2017) • Nicholson debarking machine (Year 1992) Csdpoyza D Ejfx Akcorb • Microtec measurement system (Year 2015) • 30 sorting bins • Cross-cutting plant (Year 2017) Saw line – EWD: • Twin-shaft circular saw DWK 700 (Year 1999) • Profile chipping canter PF 19-3SP/V (Year 2003) • Secondary circular saw BNK 225/6 (Year 2003) • Complete mechanisation and control system • EWD Optimes BK-100B edger Lumber sorting & ancillary equipment: • 7 sorting bins with stacking system • Complete chip and waste wood removal system • Kiln drying chambers and heating system Your advantages • Complete plant – ready for immediate operation • Proven industrial technology • Regularly maintained and modernised • Highly efficient in operation • Compact and high-performance design • Ideal for industrial lumber production General information • Main components built: 1992 – 2017 • Condition: very good • Availability: from June 2026 • Inspection: possible during operation by arrangement This plant represents an economically attractive solution for companies looking for a complete, powerful, and immediately available sawmill line.

Condition: used, Year of construction: 2008, control Siemens 840D Crodpfx Akowzypnjcsb

Year of construction: 2010, condition: excellent (used), machine/vehicle number: LNDE002222, Ink Technology Ultrachrome® Colours Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum Droplet Size 3,5 pl Nozzle Configuration 360 Nozzles Black, 360 Nozzles per Color Printing Resolution 2.880 x 2.880 DPI Paper Formats A0, A1, A2 (42.0x59.4cm), A3+, A3 (29.7x42.0 cm), A4 (21.0x29.7 cm), B1 (72.8x102.8 cm), B2 (51.4x72.8 cm), B3, B4, 17", 24", 44" Cedpfx Aepitkrskcjrb Print Margins Sheet Media Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: with roll holder

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm Cjdsw Rf S Sepfx Akcjrb control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) Cedpfx Aswzyp Ijkcorb --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Crsdpfsxxkzmex Akcsb Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: used, mileage: 155,000 km, power: 210 kW (285.52 HP), first registration: 07/2023, fuel type: diesel, overall weight: 16,000 kg, tire size: 285/70R19,5, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, central locking, cruise control, navigation system, Volvo FL 280 16-ton truck with curtain-sided body by Fa. Junge, tail lift Palfinger MBB 1500, trailer coupling, Euro 6. Sale exclusively to commercial customers, with all warranties excluded. Subject to errors and prior sale. Codpoy Nnd Aofx Akcsrb

Condition: like new (used), functionality: fully functional, power: 340 kW (462.27 HP), first registration: 11/2025, fuel type: diesel, tire size: 385/55-315/70-385 /55r22.5, color: white, driver cabin: other, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: parabolic leaf (spring), total length: 11,800 mm, total width: 25,500 mm, total height: 31,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 8,000 kg, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, airbag, electric window regulation, fog lights, full service history, onboard computer, parking air conditioner, power mirror, retarder, tachograph, tire pressure monitoring, trailer coupling, ALL TECHNICAL DETAILS CAN BE FOUND IN DETAILED FORM IN THE ATTACHMENT Credpsy H Ht Dofx Akcsb

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: 1 x Xerox Versant 280 Press with the following equipment: Includes Fiery Pro Server Includes Paper Deck A-CF03 Crodpfxjxnihkj Akcjb Includes Booklet Finisher A-FN13 Includes side trimmer Includes front trimmer with SquareFold Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,161,667 pages Colour: Approx. 1,846,661 pages Black: Approx. 315,006 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, mileage: 18,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 2318BDD ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide - Always over 400 vehicles immediately available at the largest selection and best price. More than 1,000 satisfied customers per year - top customer ratings. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Excellent condition! First owner, German vehicle, non-smoker vehicle Fully documented service history, serviced exclusively by Mercedes Benz Next service due in 605 days New front and rear brakes Nearly new all-weather tires at the front SPS loading lift system for loading and unloading Save and Rescue: Loading-lift system for personnel safety, TÜV certified according to DIN EN 795 up to 14 kN, EN 365 and TS 16415 Sortimo workshop configuration Tow bar On request, we can offer - if possible - an increased towing capacity up to 3.5t! Rear-wheel drive ----Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multi-function steering wheel * Park package with reversing camera * Reversing camera * 2nd battery (auxiliary battery) in the cabin * Passenger airbag * Acoustic package * Armrest, driver and passenger door * Mounting rails for roof rack * Passenger-optimized gearshift console (without right center console storage) * DAB tuner (digital radio reception) * Entry handle on rear right pillar * Chassis: Stabilization level II * All-weather floor mats * Vehicle without lowering function * Cruise control system (cruise control) * Rear doors (opening angle 270 degrees) * Wooden floor in cargo area * Terminal strip for electric connections (driver's seat base) * Automatic climate control (Tempmatic) * Cable duct at rear portal * Cable duct on side wall * Side marker lights * Navigation system for multimedia system MBUX * Parameterizable special module * Tire pressure monitoring system * Spare wheel with matching tires * Spare wheel holder under frame end incl. jack * Windscreen wipers with rain sensor * Mud flaps rear * Mud flaps front * Seatbelt warning system (passenger side) * Comfort headrest, driver's seat * Driver’s cab seats: dual passenger seat * Driver’s cab seats: heated passenger seat * Driver’s cab seats: heated driver’s seat * Driver’s cab seats: driver’s seat with lumbar support * Driver’s cab seats: comfort suspension seat, driver side * Driver’s cab seats: low-profile driver’s seat base * Red fuel filler cap * Split-charge relay for additional battery * Rear door step * High wood paneling in load compartment (up to roof) * Plastic wheel arch lining in cargo/cabin area * Rear wall trim * Lashing rails in cargo area - side wall at waist rail * Lashing rails in cargo area - side wall at roof frame * Fleece battery 92 Ah * Reinforced front axle * Cabin thermal insulation * Cargo/passenger compartment thermal insulation * Additional electric auxiliary heater (air) Crjdpfewknr Nox Akcjb * Additional heater (hot water) * Additional heat exchanger * Intermediate limiter for cargo sliding door Standard equipment: 3rd brake light, overhead storage above windscreen, storage compartment below passenger-side dashboard, adaptive brake light, driver’s side airbag, anti-lock braking system (ABS), traction control system (ASR), drive...

Condition: excellent (used), functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Vesant 280’ colour production system. Item for sale: 1 x Xerox Versant 280 with the following equipment: Includes Fiery Server EX180 Includes Paper Deck A-CF03 Includes Booklet Finisher A-FN13 Includes 2-side trimming Includes square fold and front trimming Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 518,174 pages Colour: Approx. 289,321 pages Black: Approx. 228,853 pages Crsdpfx Aexx Ifcskcob Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, mileage: 1,600 km, power: 387 kW (526.17 HP), first registration: 05/2025, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, Body * Body Manufacturer: Hiab Transmission * Automatic transmission Exterior * Power take-off (PTO) * Axle load indicator Safety * Intarder Interior * Fabric seats * Interior color: anthracite * Sun visor Comfort * Automatic climate control * Comfort seat (driver/passenger) * Air-suspended driver/passenger seat * Height-adjustable driver's seat * Driver's armrest * Heated driver's seat * Driver's lumbar support * Driver's seat ventilation ---- Subject to errors and changes Cedpoyw Dmcefx Akcsrb

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: 1 x Xerox Versant 280 Press with the following equipment: Crjdpfx Akjyludmeceb Includes E300 controller Includes A-CF03 paper deck Includes A-FN13 booklet finisher Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Colour: approx. 430,279 pages Black: approx. 127,152 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: new, PRICE: 2800 EUR Crsdpsp R Sdwofx Akcsb Meat Grinder S32F Unger system 5 tools Manufacturer: Sind Model: S32F Dimensions: 600x550x1000 mm Electric power: 1.5kW Capacity: 500kg/h

Condition: new, 2250m² POSTEN Stone Design Decor facing bricks - Regular selling price 56.600,- This item consists of: 2x pallet Tuscany each 63sqm = 126sqm 12x pallet Tenerife each 55sqm = 660sqm 4x pallet Nuanced 48sqm each = 192sqm 7x pallet Nuanced per 24sqm = 168sqm 14x pallet Mini Euroc per 48sqm = 672sqm 12x pallet Mini Euroc per 36sqm = 432sqm Cover your wall with Decor Euroc and be inspired by the impressive resemblance to rustic natural stone. The Decor Euroc stones are inspired by spectacular mountains and cliffs and can be used both indoors and outdoors. The stones are made of concrete and are characterized by their robust, high-quality finish, which makes the stones colourfast and frost-resistant. Suitable for flat interior and exterior walls Natural appearance Strong concrete Product weight 1. 114 grams Product height 13.5 cm Product length 1 cm Product width 28.3 cm Brand Decor General Color Cream shade, White Mini,Tuscany,White Tenerife Line Euroc Number of pieces per pack 11 Forming rectangle Number of m² per pack 0.5 m² Style tile Concrete imitation Type of tile Stone strip Type of tile Material Concrete Material property Durable Credpfjtrf Rzex Akcsb Finish Untreated Dimensions Tile thickness 10mm Application Application Walls Area of application Office, interior, living room, bedroom, kitchen Frost-resistant Yes Technical properties Glazed NO Shine NO Color-fast Yes Scratch-resistant Yes Relief Yes Full in the crowd Yes Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more tiles - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Technical data for the shelving system: Shelving system: Dexion Crodpfx Akotrwa Njcob Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 820 mm Number of bays per shelf row: 01 pcs. Number of shelves: 05 pcs. The scope of delivery includes: 02x shelf uprights, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead bar and base plates The uprights are pre-assembled 2,100 mm high 400 mm deep 05x shelves, used Material color: sendzimir galvanized Dimensions: 750 x 375 x 30 mm 05x Shelf traverse, second-hand Material color: sendzimir galvanized Clear width: approx. 750 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. 04x compensation plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 01x Load plate with details of bay and compartment loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Technical data for the shelving upright: Shelving system: Dexion Type: HI280 The scope of delivery includes: 01x Shelf rack upright, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead web and base plates The uprights are unassembled 2,100 mm high 400 mm deep Note: Cedetrmfwopfx Akcorb The shelving uprights are supplied unassembled when ordered. delivered unassembled. For an additional charge of 5.00 € / piece plus VAT, we can also pre-assemble the also pre-assemble the uprights. These are new goods, second choice unused. New goods, second choice means that there may be dust deposits or soiling may be present. Currently available in stock: 30 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, power: 427 kW (580.56 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco X-Way AS280X58Y/ PS ON 6x2-4 Skip Loader Body: Meiller AK 16. T, radio remote control, CA axle configuration 6x2P, 3 axles, trailing axle, CT driver's cab Version: AS MY DR steering SX left-hand drive, EM emission level Europe, EP engine: 580 C13 Cursor 13, 580 HP, GT transmission: TX-12M, 12-speed HiTroniX, automated, MT permitted gross weight 26-28 t, RT drive axle type SR, single reduction, single axle, SU suspension: P air suspension on rear axle, TF brakes: DIS-DIS disc/disc, TT additional axle: STER steered trailing axle, single tires, US use: MIXED (for both road and light off-road use), VE vehicle variant: CABINAT standard chassis with cab, VS vehicle set-up: ON, WB wheelbase 3440 mm, 78742 power take-off NTX/10c, lower pump, 78507 rocking mode (free swinging mode), 00869 mirror cams. Cabin features at AS: Csdpeyfqg Rjfx Akcjrb Cab in vehicle color, 72775 hybrid bumper painted in cab color, 04047 luggage compartment left and right, 02758 electric cabin tilting device, 00553 headlamp protective cover, 00632 transparent sun visor externally mounted on roof, 00873 AS cab with standard roof (MY24), 72536 additional diesel/water heater 4 KW, 72970 standard fridge and storage box, 72251 with curtains at bed, 72270 single-piece lower bed, soft firmness/feeling, incl. adjustable head section, 78563 horn behind bumper (compressed air), 08549 reinforced parabolic spring at front axle, 05097 reinforced rear axle anti-roll bar D 60 mm, 14531 reinforced front stabilizer bar, 08299 air compressor 2-cylinder 630 ccm, 78713 battery charging socket, terminals, 07805 trailer hitch, Rockinger brand, 00733 rear axle ratio: i 2.85, 06156 trailer coupling, 40 mm, 130 kN, 02640 without roof spoiler, 00384 CAN bus interface CAN-OPEN for body control, 01340 free switch slots for body manufacturer, 78877 without GPS cruise control (Hi-Cruise), 02548 side marker lights, 75181 reverse warning buzzer, switchable, 05108 warning beacon, 50105 white IC 194, 30804 printed manuals (operating instructions), 30184 tire manufacturer: GOODYEAR, 20867 tire sizes 385/65 R22.5, 315/80 R22.5, 72920 operation and maintenance manual electronically, 00876 infotainment 10" TFT display + integrated Driver Pal, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sunblind roller for side window, driver and passenger sides, 02916 HI-Comfort driver's seat, multi-adjustable, air-suspended, integrated headrest and height-adjustable seat belt, lumbar support, with 3-stage cooling or heating function, 72543 LED front headlights, 78715 LED rear lights, 72629 fog lights incl. cornering/turning light, 00915 electric parking brake, 07306 axle load indicator in instrument cluster, 00883 corrective steering function (CSF) + lane departure warning system (LDWS), 00890 adaptive cruise control (ACC) with Stop & Go, 73240 electro-hydraulic power steering, 01076 high-performance engine brake. On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Subject to errors, change, and prior sale ...

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Codpfxexrnuwe Akcerb

Condition: used, Year of construction: 2009, Silo for sawdust in very good condition. Capacity: 280 m³. Crodjx Av Rnepfx Akcjb

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, 2 METAL SIDEWALL FEEDERS, model 1100x12x2.5-P200, Crjdsvtqa Ajpfx Akcsb

Condition: used, Year of construction: 2000, cutting diameter 250 mm dimensions of saw-blade 450 x 45 x 2,0 mm cutting width 280 x 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: square 170 x 200 mm cutting speed 16- 32 m/min power requirement 1,3 kW dimensions 1,3 x 0,55 x 1,0 m weight 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade Cedpfx Akoy Nnv Sscsrb - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade