Used Abrollbehälter Feuerwehr Rettungsdienst Ab Manv for sale (11,591)

Condition: used, mileage: 25,000 km, first registration: 05/2000, overall weight: 11,000 kg, color: red, loading space volume: 28 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,000 mm, Year of construction: 2000, total width: 2,550 mm, total height: 2,400 mm, Equipment: all wheel drive, 1st hand / German Fire Brigade. Walk-in 28 m³ roll-off container, configured as a mobile storage and supply unit for rescue services, designed for swap body vehicle transport with hooklift and rollers. Application: Mass casualty incidents (MCI/MANV) and large-scale stockpiling of medical supplies. Year of manufacture: 2000. German manufacturer: JERG Feuerwehr- und Umwelttechnik, Baltringen. Unladen weight: 3,400 kg. Permissible total weight: 11,000 kg. Container dimensions (WLF-compatible): Length 6.00 m (including revolving beacon; interior box dimension approx. 5.90 m), width 2.55 m, height approx. 2.40 m (including roof hatch and ventilator). The container is fully walkable at the rear, with robust swing doors right and rear, enabling through passage even when uncoupled. Both doors feature large tilt windows and open 90 degrees. A door key (fits both doors) is included. A rear staircase, previously removed for fire service transport, is included loose inside the container. Heating unit and multiple shelves located at the rear section inside. Electrical installation with a total of 8 sockets is fitted. At the front left, there are two equipment compartments with aluminum roller shutters and shelving. Front right: a single equipment compartment with shelving, completely accessible from the left. A front battery compartment with 2 batteries for independent power supply is present, along with a permanently installed battery charger. Interior lighting installed throughout, including equipment compartments. Dsdpfsxnt Riox Agvech Blue rotating beacon at the rear for use when mounted on a swap-body truck in emergency deployment. The container is available immediately at this location. This offer is exclusively for commercial customers, authorities, aid organizations, or emergency services. Subject to prior sale and errors. VAT is not shown separately due to prior municipal ownership (differential taxation according to §25a of the German VAT Act). Final gross price = net price.

Condition: used, mileage: 13,000 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 06/1995, loading space length: 3,140 mm, loading space width: 2,030 mm, loading space height: 1,500 mm, color: red, Equipment: ABS, Volkswagen LT 35 Fire Service Vehicle Double Cab Old-Style Analog Tachometer Internal Ref. No. for inquiries: 1124854 * Equipment and logistics transporter for fire brigade use * Condition: very good * Original 13,000 km * First registered: 22/06/1995 Dodpfxsu Tzk Tj Agvsch * Engine: 70 kW / 95 hp * ABS * Rear axle differential lock * Double cab * Radio * Rear bench seat * Blue light on roof * Shelving systems with aluminium frame construction Tyres: Front axle: 185 R 14 70% Rear axle: 185 R 14 70% ----Price: €11,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: * We speak: German, English, French and ????? Errors, mistakes and prior sale reserved.

Condition: used, mileage: 288,370 km, power: 132 kW (179.47 HP), first registration: 05/2003, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro3, total length: 6,700 mm, total width: 2,280 mm, total height: 2,830 mm, number of seats: 6, Equipment: ABS, Very nice fire engine TSF-W M.A.N 8.185 4x2 double cab with 4 doors First registration: 12.05.2003 288,370 kilometers ABS 6-speed manual gearbox Cruise control Roof hatch Heated exterior mirrors 100 L fuel tank Wheelbase: 3,900 mm Tires: 235/75 R 17.5 M&S Towing equipment: ball head Towing device: Rockinger with 2-line brake system Double cab with 4 doors 6 seats 2 fittings for breathing apparatus Superstructure by TOMA, year of construction 2011 Water tank approx. 800 liters Pneumatic TEKLITE light mast 4 spotlights (24 Volt) Dodox U Nv Ropfx Agvoch Hose carrying baskets 4-section ladder JOHSTADT EL 200 FPN 5-200 pump, year 2011, driven by B&S engine type 6.5 205 cc petrol Differential taxation according to § 25a.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, first registration: 04/2026, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, emission class: euro6, color: red, number of seats: 8, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, * Emission system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * Diesel engine 2.0 l/130 kW (4V) * Start-stop system with regenerative braking * One front tow hook * Fixed tow bar * Standard wheelbase 3,640 mm * Front and rear mud flaps * 75 l fuel tank * Heavy-duty suspension/damping and reinforced stabilizer * Registered as 3.5t * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, 1,050 kg load capacity, black * Tyres 235/65 R16C 115/113 R, low rolling resistance tyres, no specific tyre brand * All-season tyres * Battery 520 A (92 Ah) * Electronic immobilizer * Electrical terminal strip and KFG with ABH programming Dodpfxoxyntio Agvech * 'Climatic' air conditioning in the cab * 2nd battery (AGM) with isolator relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist light * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo compartment * Fog lights incl. cornering light * Side marker lights * Heated front washer nozzles, without washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right convex, with integrated LED indicator and wide-angle area * Standard roof * Rear step, half-width * Entry handles on rear pillars * Rear wing doors with window cut-outs * Heated rear window with rear wiper/washer system * Radiator grille, black with chrome trim * Rear wing doors with enlarged opening angle * Intermittent wiper with light and rain sensor * Sliding door, right * Fixed side window in the passenger/cargo compartment, front left * Fixed side window in the passenger/cargo compartment, front right * Laminated windshield with heat insulation, heated * Airbag for both driver and passenger, with passenger airbag deactivation * Roof console with storage compartments, 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise insulation * Glove box with lockable lid, illuminated * Safety interior mirror, auto-dimming * Heated leather multifunction steering wheel with Tiptronic * 12V socket and 2 cup holders in dashboard * 3-point automatic seat belts with height adjustment and electric tensioners in front * Seat belt control, E-contact in belt buckle * 2 remote keys * Keyless Go * Auxiliary water heater with remote control * Chrome package * 'ergoActive' air-cushioned seat, left * 'Comfort' seat, right * "Mesh" artificial leather seat covers * Heated driver and passenger seats, individually adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB type-C data and charging port(s) with increased charging capacity * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (emergency call services), with OCU3 low * Convenience telephony * Hill start assist * Emergency brake assistant * ESP with electronic differential lock, traction control (ASR) and ABS * Front and rear parking sensors * Cruise control * Traffic sign recognition * Reversing camera system with dynamic guidelines * Driver attention and drowsiness detection

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear outlet Superstructure: Water tank roll-off container approx. 12,000 liters. ARCHIVE IMAGES Water tank without platform approx. 12,000 liters – according to DIN 30722-1 – Internal clear dimensions LxWxH: 5500x2394x1003 mm Dcodpfxeyymwpo Agvsh – Material grade: S235 (St-37) – Floor/side wall plates: Smooth steel plate, floor thickness 5 mm, sides 3 mm, roof and rear wall 4 mm – Rear lower section: 2x Storz A-connectors with ball valve (4 inch) – Rear upper section: one Storz B-connector with elbow and cap (2 inch) – Front upper hook: one Storz B-connector with elbow, coupling, and cap (2 inch) – Galvanized and screwed-on climbing ladder on the front wall, pipe for venting (with ball valve for closing) – Frame made from INP180 – Roof access port: diameter 600 mm – Inside: 3 baffle plates, diameter 600 mm (large cavities) – Watertight (leak-tightness tested) – Greasable steel rollers Tanks welded, degreased, blasted, interior primed with epoxy Temabond ST 200 300 μm, exterior primed with epoxy paint 60 μm and finished with 2K polyurethane topcoat (Polyurethane paint B7) 40 μm in RAL color shade 3000 red. With UVV sticker (DGUV), checklist (safety instructions), and warning markings – watertight (leak-tightness tested). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted.

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, rear outlet Body: Water tank roll-off container approx. 10,000 litres. ARCHIVE PHOTOS – Water tank with platform approx. 10,000 litres – according to DIN 30722-1 Dcodeyymwcopfx Agveh - Clear internal dimensions (LxWxH): 5400 x 2394 x approx. 1000 mm (tank 4600mm, flatbed 800mm) - Material grade: S235 (St-37) - Base plate / side plates: Base plate thickness 5mm, sides 3mm, roof and rear wall 4mm - Rear platform made of 5mm checker plate - Chassis made of INP180 - Manhole on the roof: diameter 600mm - Three 600mm diameter internal baffle walls (large cavities) - Galvanised, bolted-in ladder on front wall - Bottom rear with A-connection and water tap - Upper rear with B-connection and filling flap - At the front wall, C-connection with ball valve bottom left and right, pipe for venting - Two greaseable steel rollers, length 300mm - Two galvanised, bolted-in riser pipes (1x front, 1x rear) - Two hose-type fill level indicators (1x front, 1x rear) Tanks welded, degreased, blasted, interior primed with epoxy Temabond ST 200 (300 µm), exterior primed with epoxy resin paint (60 µm) and finished with 2K polyurethane paint (B7) (40 µm) in RAL 3000 red Supplied with accident prevention badge (DGUV), safety checklist, and warning markings – waterproof (tested for water tightness). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to modifications, prior sale, and errors.

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, rear outlet Body: Water tank roll-off container approx. 10,000 litres. ARCHIVE PHOTOS – Water tank with platform approx. 10,000 litres – according to DIN 30722-1 - Clear internal dimensions (LxWxH): 5400 x 2394 x approx. 1000 mm (tank 4600mm, flatbed 800mm) - Material grade: S235 (St-37) - Base plate / side plates: Base plate thickness 5mm, sides 3mm, roof and rear wall 4mm - Rear platform made of 5mm checker plate - Chassis made of INP180 - Manhole on the roof: diameter 600mm - Three 600mm diameter internal baffle walls (large cavities) - Galvanised, bolted-in ladder on front wall Dcsdeyymwiepfx Agvjh - Bottom rear with A-connection and water tap - Upper rear with B-connection and filling flap - At the front wall, C-connection with ball valve bottom left and right, pipe for venting - Two greaseable steel rollers, length 300mm - Two galvanised, bolted-in riser pipes (1x front, 1x rear) - Two hose-type fill level indicators (1x front, 1x rear) Tanks welded, degreased, blasted, interior primed with epoxy Temabond ST 200 (300 µm), exterior primed with epoxy resin paint (60 µm) and finished with 2K polyurethane paint (B7) (40 µm) in RAL 3000 red Supplied with accident prevention badge (DGUV), safety checklist, and warning markings – waterproof (tested for water tightness). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to modifications, prior sale, and errors.

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, rear discharge Structure: water tank roll-off container approx. 12,700 L. Roll-off container/water tank from approx. 6,000L to 13,000L The tank shown has a volume of approx. 12,700L - Internal clear dimensions LxWxH: 5,400 x 2,400 x 1,200 mm (tank 4,600mm, platform 800mm) - Material quality: S235 (St-37) - Floor sheet/wall sheets: smooth floor sheet thickness 5 mm, sides 3 mm - Forklift pockets at base of the container - Rollers greasable - Top ventilation with cover/access hatch - Upper C-coupling with flap - Rear A-coupling with ball valve - Epoxy coating inside, 50 micron Dcsdpfx Agjlu Hrusvsh - Outside primed 40 micron and painted - Two internal baffle plates - Ladder on front wall right side - Additional C-coupling with ball valve, front, lower left on front wall Container is fully welded, degreased, blasted, primed inside with 50 µm epoxy coating, outside primed with 40 µm alkyd primer and painted with 40 µm alkyd resin in RAL color of your choice Delivery time: approx. 8–10 weeks Available from 6,000–13,000 liters, price depending on capacity between EUR 8,000.00 and approx. EUR 13,000.00 depending on volume Available with self-priming water pump, self-lubricating with separate drive motor, delivery rate: 129 m³/h (2,000 l/min), head: 17 m, particle size: 28 mm, fuel type: diesel, tank 4.3 liters, see 2907 at approx. EUR 4,000 extra charge! Available as roll-off container and tank. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 1985, color: red, loading space width: 2,420 mm, loading space length: 3,150 mm, loading space height: 2,000 mm, mileage: 1,001 km, first registration: 01/1985, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Body: box body with roller doors, roof accessible on a new city roll-off frame, total length approx. 4m, ex. fire department, box dismantled from a U1300L built in 1985! Top condition! All information without guarantee, as the body is in the inlet! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! - . Dsdpfx Agoi Rmlfovjch

Condition: used, power: 10 kW (13.60 HP), input voltage: 400 V, inner dimension width: 800 mm, inner dimension height: 600 mm, number of chambers: 2, actuation type: electric, Pizza/stone oven – (without steam injection) 2 levels – internal dimensions approx. 800x600 mm Modern display, 400V power, 10KW With extractor hood and feet Djdjyg N D Djpfx Agvsch For Flammkuchen, pizza, Lamacun, etc. Used until recently, ready for immediate use, test run possible We have 6 units – used. From our own operations. Package price possible for dealers.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour Dcodsy Tu Rqspfx Agvoh The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Dsdpfxoy S Ru Aj Agvjch Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Djdoy S Rtlepfx Agvech Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, tank capacity: 250 l, total length: 1,490 mm, total width: 900 mm, total height: 1,730 mm, outer diameter: 790 mm, wall material: stainless steel, Used stainless steel tank Article number: 10176 Dcodpfx Agjy Uurdovjh Volume: 250 L Type: Standing on a roller frame Material (in contact with the medium): Stainless steel V4A / AISI316 Number of fixations: Roller frame Bottom: Conical bottom Top: Conical bottom Operating pressure of the tank according to the nameplate: Atmospheric Tank dimensions: Tank diameter: Ø 790mm Tank height: 1000mm Distance from outlet to bottom: 480mm Overall height: 1730mm Overall width: 900mm x 1490mm Height of the feet: 130mm Materials: Inside: 1.4571 / AISI316 Exterior parts: 1.4571 / AISI136 Equipment: Centered on the top: 1x dome cover Ø 400mm Connections on the top: See photo Pump Control cabinet Electric heating element

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. Dcsdpfx Aget Irffevsh • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 1074-B-101, Offering fully operational pallet collar production line. Totally 3 machines: Djdpfx Agjy Nyx Ssvjch 1. Drill 2. press 3. press Also additionally assembling tools, tables, hinges ect. Possible to see how it works. Line production capacity 600-800 collars per day.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System Dcedpfoyhhgaox Agvsh The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcedpfx Aopitfxogvjh

Condition: used, Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, Full trigeneration plant with York absorption chiller. Regularly maintained and covered by the supplier’s preventive and corrective maintenance contract. Major overhaul performed in 2021 at 61,000 operating hours. New Long Block (LB) supplied by INNIO on the occasion of the major overhaul, documentation available. • 87,670 plant hours; • 26,904 engine hours; The crankshaft has not been machined, while the engine block has been machined for the use of oversized liners. Overhauled alternator, report available. Dcedpfoy Ibldox Agvjh Price and further information available upon request.

Condition: used, mileage: 67,948 km, power: 140 kW (190.35 HP), first registration: 02/2019, fuel type: diesel, empty load weight: 4,780 kg, maximum load weight: 2,710 kg, overall weight: 7,490 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 6,030 mm, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 500 mm, operating hours: 90 h, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - Exact delivery time upon request, approximately 2 months - Chassis already on site and available for inspection at any time Dodpfx Agjy Hx D Uovech - The images shown are reference pictures for illustrative purposes - Exact equipment details optionally available upon request - MAN TGL 8.190 BL fire engine with city hooklift system - New TÜV/inspection (HU/AU), new body (lifting capacity 6,000 kg) for city containers approx. 3.5m to 4.0m - Permissible total weight: 7,490 kg - Curb weight without container: approx. 4,780 kg - Payload: 2,710 kg - Lane departure warning system - Differential lock - Manual transmission - Driver comfort seat - Trailer coupling (jaw-type) 11,265 kg - Ball-type coupling, trailer load: 3,500 kg - Air-suspended rear axle - Front axle load: 3,400 kg, rear axle load: 5,200 kg - 2x work lights - Rear window - Hydraulic connection for tipper trailer optionally available - Subject to errors and prior sale! - More information, further XXL images, directions, on our homepage at: - For inquiries in English, please call ... Air conditioning, automatic climate control, driver seat heating, VAT deductible, ESP, ASR, ABS, radio, onboard computer, cruise control, heated mirrors, electric front windows, electronic immobilizer, central locking, trailer coupling, power steering, ride height control, tachometer, differential lock, electrically adjustable mirrors, tachograph, cabin: local traffic configuration, air-suspended driver's cab, air-suspended driver’s seat, electric windows, seat heating, work lights, additional lights, heat-insulating glazing, PTO, trailer brake (with 2 lines), tipping hydraulics, first-hand, emissions class: Euro 6, diesel, rear-wheel drive, type code (HSN) 1516, particulate filter, new TÜV and AU inspection before delivery, rental possible, low-emission sticker: 4 - green, fire extinguisher installed.

Condition: good (used), functionality: fully functional, mileage: 17,300 km, power: 88.26 kW (120.00 HP), fuel type: diesel, empty load weight: 5,430 kg, overall weight: 10,500 kg, axle configuration: 4x4, fuel: diesel, Year of construction: 1986, Equipment: all wheel drive, TOP CONDITION Dcodpsxm S Abefx Agvsh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Dcedpfoy Hgnhox Agvoh Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 472 h, power: 60 kW (81.58 HP), load capacity: 750 kg, lifting height: 26,000 mm, lifting power: 750 kg/m, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 19,800 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: electric, wheelbase: 4,100 mm, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 472 h Machine width: 2.50 m Drive system: 4x4 Driveable at full height: Yes Extendable platform: Yes (2.13 m) Power output: Electric drive, 80 V / 750 Ah Working height: 28.00 m Platform capacity: 750 kg Drive type: Electric – Hydraulic Battery type: Lead-acid Self-levelling outriggers: Yes Platform dimensions (L x W): 5.48 × 2.44 m Tyre type: Non-marking CE certified: Yes Weight: 19,800 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Selected from a professional fleet with verifiable technical data CE-certified machine Driveable at full working height High platform capacity suitable for heavy-duty applications === CONDITION === Machine is in original operational condition. Electric drive system fully functional. Dedpfxox Ivqns Agvoch Battery system present (80 V / 750 Ah). Available directly from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide transport available. Price on request (EXW / excl. VAT). Reliable heavy-duty electric scissor lift designed for demanding indoor and outdoor applications. High load capacity, full-height drivability and extendable platform ensure maximum productivity. Machine is CE-certified and ready for immediate deployment. === DELIVERY === Crane loading available on request. Flexible transport solutions available depending on destination. Logistics handled by Collé Rental & Sales.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,934 h, load capacity: 750 kg, lifting height: 20,500 mm, lifting power: 750 kg/m, platform length: 4,300 mm, platform width: 2,400 mm, overall weight: 11,000 kg, transport length: 4,600 mm, transport width: 2,450 mm, transport height: 2,970 mm, fuel type: diesel, tire condition: 75 %, wheelbase: 3,140 mm, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 6,934 h Machine width: approx. 2.45 m Drive: 4x4 Driveable at full height: Yes Extendable platform: Yes Engine power: Diesel (manufacturer on request) Working height: 22.5 m Platform capacity: 750 kg Drive type: Diesel Battery type: N/A (diesel powered) Self-levelling outriggers: Yes (WDS system) Platform dimensions (L × W): 4.30 × 2.40 m Tyre type: Rough terrain (non-marking: no) CE certified: Yes Weight: approx. 11,000 kg Indoor / outdoor use: Outdoor === HIGHLIGHTS === Carefully selected machine with verifiable history CE-certified and compliant with European safety standards Equipped with self-levelling hydraulic outriggers (WDS) High platform capacity for heavy-duty applications Ready for immediate transport and operation === CONDITION === Machine in original working condition. Diesel engine and hydraulic system operate correctly. Tyres in good condition (approx. 75% tread remaining). Available directly from stock. === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery possible Dcedex Ihicopfx Agveh Price on request (EXW / excl. VAT) Reliable AB Lift S225-24 D4 WDS diesel scissor lift for demanding outdoor applications. Thanks to its 4x4 drive, self-levelling outriggers and high platform capacity, this machine is ideally suited for construction, industrial and infrastructure work. All machines from Collé Rental & Sales are professionally inspected and ready for immediate use. Spare parts, service and technical support available on request. === DELIVERY OPTIONS === Crane loading available on request Flexible transport solutions tailored to destination and logistics Transport professionally arranged by the Collé Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 496 h, load capacity: 750 kg, lifting height: 14,300 mm, lifting power: 750 kg/m, platform length: 4,500 mm, platform width: 2,360 mm, overall weight: 9,000 kg, transport length: 4,840 mm, transport width: 2,460 mm, transport height: 2,370 mm, fuel type: electric, tire condition: 85 %, wheelbase: 3,200 mm, color: blue, Equipment: UVV, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 496 h Machine width: 2.46 m Drive system: 2WD (two-wheel drive) Driveable at full height: Yes Extendable platform: Yes (up to 2.70 m) Power output: Electric drive, 80 V / 540 Ah Working height: 16.30 m Platform capacity: 750 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: No Platform dimensions (L × W): 4.50 × 2.36 m Tyre type: Non-marking CE certification: Yes Weight: approx. 9,000 kg Indoor / Outdoor use: Both (Indoor & Outdoor) === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Battery tested and in good working condition. Dedox Nhvrepfx Agvsch Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable electric scissor lift with high platform capacity and compact design. Ideal for indoor and outdoor applications where low emissions and quiet operation are required. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional technical assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales.