Used Zmm C 10 Ths for sale (71,488)

Condition: new, Siemens 6SC6100-0BN20 module B C D SN:T-T31257, unused, 100% functional, scope of delivery as per photos Gedpfsxagy Usx Ag Reiu

Condition: ready for operation (used), Siemens 6SC6170-0FC51 power module 462 017.9052.51 B C D Serial number: 103097, used, in good condition, 100% functional, delivery as shown in the photos. Gisdpey Nr Irsfx Ag Rsu

Condition: new, Dittel F 20971 Built-in balancing head 829-5-10 , serial no. according to photo ,unused with traces of storage, 100% functional Gijdoi D Upnspfx Ag Rsu

Condition: ready for operation (used), Winkelmann GNFI 90.11M / 10 DC motor SN:159295, used, normal signs of use, 100% fully functional, delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Gijdpox Dwizefx Ag Rju

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-0/WI520LV / 235450 servomotor, serial number: MAC0290-85049 + Heidenhain ROD 1424.003-1250, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Giodpfjx Etyzex Ag Rsu

Condition: ready for operation (used), Brinkmann TC 25 / 810 + 001 submersible pump 10 L / min No. - 002, used, slight signs of wear, 100% functional, scope of delivery as per photos Gsdpfx Agsi D Hmde Roiu

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 three-phase AC servomotor, serial number: 42433, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gisdpfxjy T Unis Ag Rsu

Condition: ready for operation (used), Indramat MAC090C-0-GD-2-C/110-A-1/S001 permanent magnet motor, serial number: MAC090-77267, used, in good condition, 100% functional, scope of supply as shown in the photos. Giedpjy T Un Asfx Ag Reu

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-B-0/S001 Permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, small traces of use, 100% functional Gsdpoi D Imyefx Ag Rsiu

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 permanent magnet three-phase servo motor SN: 17285, housing broken off from connector, function not affected ,used, normal signs of use, 100% functional, scope of delivery according to photos Gijdpfx Aoi D Irtsg Rju

Condition: ready for operation (used), Indramat stator for MAC 090A-0-RD-4-C / 110-A-0 / WI522LX motor, serial number: 51271, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gijdpfx Aszahu Ueg Rsu

Condition: ready for operation (used), Indramat rotor for MAC 090A-0-RD-4-C / 110-A-0 / WI522LX motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gisdpfxozahu Is Ag Rsu

Condition: ready for operation (used), Indramat MAC090B-0-PD-2-C / 110-A-0 // SN:39974, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Gedpstt U Afofx Ag Rsiu

Condition: new, Manufacturer: Schmersal Product series: PROTECT PSC1 Type: PSC1-C-100-FB1-PNPS Article number: 103011996 Device type: Programmable safety controller Supply voltage: 24 V DC Safety level: PL e Safety level: SIL 3 Safe inputs: 14 Safe semiconductor outputs: 4 Signal outputs: 6 Safety relay outputs: 2 Communication protocols: EtherCAT, Ethernet/IP, PROFINET IO, PROFIsafe Mounting type: DIN rail Dimensions: 112.5 × 100 × 115 mm Weight: 630 g Available quantity: 6 pieces Godpfjzcguxjx Ag Reiu

Condition: used, empty load weight: 5,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller timber trailer 3-axle | SAF axles with disc brakes | Unladen weight 5,520 kg | Payload: 32,480 kg | Lift axle | Tyres: 385/65 R22.5 | 10 pairs of stakes | Subject to error, input mistakes and prior sale. Godpfxox S N Ubo Ag Reiu

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual mode / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Gisdpfxey I Tdxj Ag Rou Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test item control Scope of supply: CTS climate test chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Other: Inspection possible by appointment Loading can be arranged Commercial sale – sale without warranty. (Subject to changes and errors)

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, available for immediate delivery with automatic transmission, double glazing, and auxiliary heater! 8 x facelift model Gjdezdbu Ajpfx Ag Roiu The ideal school bus or small group minibus for those on a limited budget. Built for Germany with double glazing, auxiliary heater, and a 24-month warranty (optionally extendable). 29 sleeper seats with folding tables ----General vehicle data: * Length: 7,168 mm * Width: 2,262 mm * Height: 3,352 mm * Wheelbase: 3,350 mm * Front/rear overhang: 1,613 mm / 2,205 mm * Turning circle diameter: 12,200 mm * Passenger capacity: 29 + 1 * Permissible total weight: 8,160 kg * Diesel tank capacity: 160 l * AdBlue tank: 12 l Drivetrain: * Type: E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Automatic transmission * Emission standard Euro 6e * Displacement: 2,998 cm³ * Power: 110 kW / 150 hp at 3,500 rpm * Max. torque: 370 Nm at 1,320 rpm * Engine compartment fire suppression system Braking system and safety features: * Disc brakes * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ABS (Anti-lock Braking System) * ASR (Traction Control) * AEBS (Advanced Emergency Braking System) * LDWS (Lane Departure Warning System) Climate control / heating / ventilation: * Safkar roof-mounted air conditioning * Convector heaters on side panels * 1 roof hatch, manually operated * Additional Eberspächer heating unit Doors: * Door 1: single-leaf at front * Door 2: single-leaf at rear * Electrical control Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been in the market for 35 years. You can inspect and test drive the vehicles with us. You will be welcomed at our operational premises—not in some parking lot, and our business address is not a mailbox at an apartment building. Those mailboxes usually disappear after a few months.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2022, next inspection (TÜV): 08/2026, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,665 mm, Year of construction: 2022, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typographical errors, and prior sale: Reisch 65 cbm sliding floor trailer (Vehicle 607) First registered: June 20, 2022 Type: RSBS-3-10 Permissible total weight: 35,000 kg Unladen weight: 6,720 kg Payload: 28,280 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,665 mm TÜV (technical inspection) valid until: 08/2026, main inspection valid until: 02/2027 Rollover tarpaulin, platform Clean floor, end pieces, sides Portal doors 1/2 and 1/2 at the rear LED work lights + reversing lights 2 x 12-ton 2-gear winch Plastic storage box Air suspension with lifting and lowering function 1 lifting axle SAF disc brakes Tires: 385/65R22.5, approximately 50% tread 8-ton axles Gsdpfxszdbbpo Ag Roiu Price: €30,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 10,100 mm, overall weight: 2,990 kg, fuel type: electric, color: yellow, transport length: 2,820 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Industrial Vertical Mast Lift - JLG Toucan T 10 E Manufacturer: JLG Model: Toucan T 10 E Year of manufacture: 2013 Technical Specifications Working height: 10.10 m Platform height: 8.10 m Lateral outreach: 3.38 m Slew range: 345° Total weight: 2,990 kg Length: 2.82 m Width: 0.99 m Access height: 1.99 m Platform size: 0.90 m x 0.70 m Platform capacity: 200 kg Outriggers: none Drive: electric Special features White tyres Basket arm rotation angle: +66°/-61° Inspections/Status Safety inspection (UVV): valid until 09/2025 Gedpfexfiy Usx Ag Rsiu Operating hours: approx. 967 hrs as of 04/2025 Age-related signs of use If interested, we are available for you Monday to Friday from 07:00 to 16:00. Quoted price plus statutory VAT. Subject to change and errors!

Year of construction: 1993, condition: used, Manufacturer: Hosokawa Bepex Model: PCS-10 (Pulvocron) Year : 1993 Type: Air classification mill / Microniser Nominal capacity: 10 kg/h Brabender screw feeder Product filtration and collection cyclone + pneumatic cleaning Explosion-proof safety valve Rotary air/product seal valve Mikropul 12-6-30 receiver filter: Gjdpfezbynvox Ag Roiu Product collection hopper with fine particle separation Internal dimensions: Ø 90 cm x 530 cm Lubrication unit with a pump Steam sterilisation Plan a new electrical installation (This request is subject to an additional quote) Full technical documentation + paper drawings Product outlet hopper capacity: 200 kg – 1,100 litres

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling MachineMachine: 17-10 FP 300 NC / 5 mSerial Number: 2.8304.06Original Year of Manufacture: 1983In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction.The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks.The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation.The system has been professionally dismantled and packed in containers.It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment.Manufacturer: Waldrich CoburgOverhauled by Waldrich Coburg (2016)Siemens SINUMERIK 840D slUniversal Fork Milling Head USP 300 C 350Additional Angle Milling Head WFU 500 SZ 400 F17Workpiece weight up to 100 tFull protective enclosureExtensive technical documentation availableDismantled and ready for loadingLocation: Port of Hamburg, GermanyImmediately available Passage between the uprights: 3,500 mm Gisdpfx Aozc Sagsg Rou 5-axis machining: Yes Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, 20 lashing rings each rated at 6 t, 20 lashing brackets each rated at 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, removable Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 warning signs with lighting Price: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,500 mm! -- Subject to misprints, errors, and changes, sample images -- For more data, see: !, More details: ! Giodpfx Aozbxl Tjg Rju

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor Gjdsxmr N Ijpfx Ag Rjiu 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Gisdezc I Exopfx Ag Rsu Brand: Eba, type 10/550 CNC. Equipped with a hydraulic pressing system, air table, light beam, geared mechanism, and manual operation, 220 volts. This machine comes from a government office and has been used very little. It is in as-new condition. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). Regards, Henk Hoos.

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 2006, machine/vehicle number: 119441, load capacity: 350 kg, empty load weight: 1,730 kg, next inspection (TÜV): 02/2026, fuel type: electric, We offer this faulty Haulotte Compact 10 scissor lift, year of manufacture 2006. Battery/charging controller is defective. Mechanically operational. The scissor lift shows signs of use. Manufacturer: Haulotte Model: Compact 10 Year of manufacture: 2006 Machine type: scissor lift Condition: defective Gijdpfx Aoyzzybeg Rsu If you have any questions or need more information, feel free to send us a message or call us.