Used Wp Kemper St 125 A for sale (72,545)

Condition: good (used), • Dimensions: L 6000 mm x H 3000 mm x D 1320 mm Support: 390 mm right and 390 mm left 2 pieces Ppjder T Itpjpfx Ak Djr

Condition: refurbished (used), Kemper F125 SL paddle mixer 200kg dough Podou Uty Nopfx Ak Djpr 120kg flour 2 speed

Condition: new, machine/vehicle number: 207ad28f83705ed0d38a4f174, empty load weight: 3 kg, maximum load weight: 11 kg, overall weight: 14 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude) Telescopic front support leg 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right Wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required Towing device central axle trailer Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered) Lower coupler drawbar without length adjustment drawbar Axles + suspension SAF drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, with connection line to the engine trolley, in FR-left Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in each case in lowering / lifting position Vehicle - driving stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position! 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, in FR-left 2 x 7-pin sockets in FR left rear for truck-mounted forklift 1 x 15-pin socket in FR left rear for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Approval / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Ppsdpfx Aoi Ri Iaek Dsr Frame

Condition: new, machine/vehicle number: e8628b18bda6db44719c946e0, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 385/65 r22.5, Further information Chassis Changing turntable Fine-grained steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with strong ball bearing slewing ring 2 wheel chocks with holder Aluminum side bumper Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard Underride guard shortened for optimum clearance to the swap body supports, lighting system mounted protected Half-shell mudguards Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Drawbar height adjustment via spring Pedpji Rivlofx Ak Dspr Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering and lifting position Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 2 additional LED work lights at the rear, switched via reversing light 1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration/ plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Please note! These are archive images!

Condition: new, machine/vehicle number: d7a33d709a92cd60f18d010e8, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 385/65 r22.5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side impact guard Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard Half-shell mudguards Spray flaps Towing device central axle trailer Drawbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or precise testing still required in the event of an order) Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the engine trolley, connection in FR right-hand side EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering / lifting position Wheels and tires 385/65 R22.5 Athos brand Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, connection in FR right-hand side 2 additional LED work lights, integrated at the rear, switched via reversing light 1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Psdpfei Riwbex Ak Depr Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Attention: Archive pictures!

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Ppjdowzvquspfx Ak Der Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Condition: ready for operation (used), CTX125 X-RAY system control unit, used, normal signs of wear, 100% functional, scope of delivery according to photos Ppjdpfol Ech Tjx Ak Djr

Condition: ready for operation (used), Mennekes 364 wall plug 125A-6H/380-415V , used, normal traces of use, 100% functional, scope of delivery according to photos Ppodpfsi Eb D Sex Ak Dor

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPWN854125 serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Psdpfsi Edg Nox Ak Depr

Condition: ready for operation (used), Mennekes 364 wall plug 125A-6H/380-415V , used, normal traces of use, 100% functional, scope of delivery according to photos Pedpfxoi Eb D Ij Ak Depr

Condition: ready for operation (used), Siemens 6FX1125-8AA01 / 548 258 9101 Production number: 83 GE.548258.0002.00 E-Status: B00, used, good condition, 100% functional, scope of delivery as per photos Ppodpfx Ajxagpcjk Dsr

Condition: ready for operation (used), Siemens 6SN1125-1AA00-0EA0 LT module SN:T-P32033992, the item has been refurbished and has a 3-month warranty, used, normal signs of wear, 100% functional, scope of delivery as per photos Ppjdpfx Aoxahgpok Djr

Condition: ready for operation (used), Indramat 2G 1125 IR=B3-3302 DC servo motor SN: 70701, professionally completely overhauled and tested, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ppjdpfx Akstwhrzo Dor

Condition: refurbished (used), functionality: fully functional, used dough divider rounder WP / W&P / Werner & Pfleiderer Rotamat CN, overhauled, with 3 moulding plates, new electrics, newly painted, new bearings, new V-belts, for 30 pieces, about 900 to 2,100 g dough in total, serial no. 215 022, 2.1 A, 380 V, 50 Hz Ppedpjx Ti Azsfx Ak Dsr

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside out. For years. And as a manufacturer, we are always up to date. We look forward to you. Small compact folding bench RED-1250cmm for steel sheet 0.8mm, aluminum sheet 1mm with built-in beading machine and roller shears. * Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to them, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. - Possibility of regulation of the cheeks - Weight: 49 kg - bending beam: 15mm - Working length: 1.25 m - built-in beading machine -ᐳ tube diameter 14mm - Passage opening 60mm - Bending radius: 145 degrees Ppsdpfxjcqu Svs Ak Dsr Price: 1.100 euros + shipping costs Delivery date: every week Cash on delivery or bank transfer in advance We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery.

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Series D, SN: 41269093, used, minor signs of wear, 100% functional, delivery as shown in photos. Ppsdjx Eqtxspfx Ak Dor

Condition: ready for operation (used), Siemens 6SN1125-1AA00-0DA0 Lt-Module Version: A SN:T-PN2029425. The item has been refurbished and comes with a 3-month warranty, used, normal signs of wear, 100% functional, delivery as shown in the photos. Podpfxsx Eu H Aj Ak Djpr

Condition: ready for operation (used), Trumpf 1255448 Industrial PC / Industrie PC SW V4.2 HW Index A3 SN: 2918, used, in good condition, 100% fully functional, delivery as shown in photos Ppedpfx Asx Eu T Nsk Der

Condition: ready for operation (used), Heidenhain RCN 280 03S17-7V angular encoder Id. 1253381-03 SN:76475487, professionally fully overhauled and tested with 6-month warranty, 100% functional, scope of delivery as shown in the photos. Ppedpfex Er Nzex Ak Dor

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, We offer this used Kemper Multimatic spiral mixer, year of construction 2004. Manufacturer: Kemper Model: Multimatic Ppsdpfx Aksx R Ugme Dor Year of construction: 2004 year Condition: used Category ID: 1005 Type ID: 187 Machine type: Dough line for hamburgers and hot dog buns If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Ser D SN: 41269120, used, slight signs of wear, 100% functional, scope of delivery as per photos Ppsdpfx Akercun Is Dsr

Condition: ready for operation (used), Rexroth SF-A4.0125.030-10.071 Motor SN 004602722 MNR 1070082280, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Pedeq A A N Eopfx Ak Djpr

Condition: ready for operation (used), Siemens 1FT7064-5WK71-1MH1 synchronous motor SN:YFHN631252803001, professionally fully overhauled and tested with 12-month warranty, 100% functional, supplied as per the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Psdpfx Akjx Du Als Depr

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive SN:256355-01253, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per the photos. Pjdpfx Aksx Dw Hgs Dopr

Condition: ready for operation (used), Heidenhain RCN 280 03S17-7V angle encoder Id. 1253381-03 SN:639787320, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Ppjdpfxjx Dww So Ak Der