Used Wmt Lct 425 for sale (1,414)

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: Isdsygxzrjpfx Ahysih - Foot switch - Wired remote control - 315mm chuck

Condition: new, feed pressure 8 bar Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. Iodpfx Ahsu Imhieyoih motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: new, range L-W-H 780x480x105 mm Iiodou Imigepfx Ahysh weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism.

Condition: new, press capacity 60 kN oil volume 60 ml 5 - 40 Grad C weight 7 kg range L-W-H 430 x 350 x 100 mm Pneumatic impact wrench set 1/2 " Iodpfx Aeu Imkkjhysih 10 pcs. Nuts in 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm 1 pc. 1/2 "extension rod 1 pc. 4 mm Allen key In the storage case

Condition: new, feed pressure 8 bar Iedsu Imp Hepfx Ahyjih Effective free air delivery 235/165 L/min Receiver capacity 50 / 10 l / bar weight of the machine ca. 37,5 kg. Number of cylinders 2 Stk. motor 230V / 1,5KW V / KW range L-W-H 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. tool trolley with tool set 272 pieces. Iiodpfsu Imp Tex Ahyeh See pictures

Condition: new, sheet width 1070 mm plate thickness 9.0 / 10,0 mm distance between columns 1070 mm diameter of upper rolls 190 mm pre-bending capacity 9,0 mm connected load 5,3 kW Isdpjw In A Isfx Ahyjih weight of the machine ca. 2,4 t dimensions of the machine ca. 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap 320 mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 38 mm tailstock quill taper MT 3 connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Iiodpehwavrefx Ahyjh Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools

Condition: good (used), Servo motor, geared motor, electric motor -Manufacturer motor: Siemens type 1FK7042-5AF71-1SGO -Voltage: 267 V -Torque: 3.0 / 2.6 Nm -Speed: 9000/3000 rpm -Manufacturer gearbox: alpha type LP 090-M02-30 -111-001 -Translation: 1:30 Iedpfx Ahshyutueyeih -Shaft: Ø 22 x 35 mm -Construction: B14 -Dimensions: 345/95/H143 mm -Weight: 10.1 kg

Condition: good (used), Servo motor, geared motor, electric motor -Motor manufacturer: Siemens Type 1FK7042-5AF71-1SGO -Voltage: 267 V -Torque: 3.0 / 2.6 Nm -Speed: 9000/3000 rpm -Manufacturer of gearbox: alpha type LP 090-M01-10 -111-00 -Translation:: 1:10 -Shaft: Ø 22 x 35 mm -Design: B14 Iedpohyuucsfx Ahyeih -Dimensions: 320/95/H143 mm -Weight: 9.2 kg

Condition: new, sheet width 1070 mm plate thickness 3,0 mm distance between columns 1100 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 420 Kg dimensions of the machine ca. 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller Ijdjhfhzvjpfx Ahysih - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V

Condition: new, Power 7,5 KW Receiver 500 L weight of the machine ca. 300 kg dimensions of the machine ca. 1,7x 0,6 x 1,45 m feed pressure 16 bar liter capacity 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Isdpfxehid Ers Ahyoih Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm Isdehpktropfx Ahyeih band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, weight max. 20 t workpiece diameter 150 - 3800 mm drum diameter 350 x 150 mm Isdsf Ep Dmopfx Ahyeih feed 100 - 1000 mm/min total power requirement 2 x 1,1 kW

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min Iodpfxef Nb Hko Ahyeih centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

Condition: used, Electric motor, three-phase motor Iiedegurxbopfx Ahyoh -Electric motor: power 5.5 kW -Type: 4AM112M4Y3 -Speed: 1425 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Dimensions: 435/300 / H330 mm -Weight: 57 kg

Condition: new, Protection level 4 - 12 M Power supply 2 x CR2032 weight 460 Gramm dimensions 250 x 270 x 230 mm Ijdpfegu Ey Hsx Ahyoih

Condition: new, number 37 Positionen 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Iisdpfegazl Rox Ahyeh Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1000 mm Iodpfxogazl Ue Ahysih table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Isdjgazmkjpfx Ahyjih Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, number 57 Positionen 22 mm condition neu weight 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Isdpfxjgazmre Ahyjih Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) Iijdega Nh Hspfx Ahyeh 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: good (used), Servo motor, geared motor, electric motor, three-phase motor -Motor manufacturer: Siemens Type 1FK7042-5AF71-1FAO -Voltage: 267 V -Torque: 3.0 / 2.3 Nm -Speed: 9000/3000 rpm -Manufacturer of gearbox: Laipple Keb type NMS30 -Translation:: 1:40 -Hollow shaft: Ø 14 x 65 mm -Quantity: 1x geared motor available Isdpfxsh Dxrze Ahysih Price: per piece -Dimensions: 345/95/H130 mm -Weight: 7.1 kg

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm Iodpsl R Nnvsfx Ahyoih welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right Iedomhm Aqspfx Ahyoih - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling