Used Weiler Voest-Alpine Steinel E35 for sale (645)

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Ijdox Urmljpfx Ah Eotl

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Itsdpfxjy Rpr Rs Ah Eel Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Itedswcxf Dopfx Ah Eol Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front Iedpfx Ahjzbc Dao Eotl

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Iedpfx Ajzu Tf Tjh Estl

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" Iodszbc Dtepfx Ah Ejtl - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Itsdpfx Ajvdu N Aeh Ejl

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: Iedpfx Aevv Etvsh Estl >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key Itedpexacgdofx Ah Eel - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Itjdpfx Ajw I A Uxeh Eol Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Itodpsyfnwmjfx Ah Eel

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Itodpfxsx Av Rue Ah Ejl

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min Iodpfx Ahjxacire Ejtl motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Stator blade row: 2 Rotor width: 280 mm Rotor diameter: 280 mm Itjdpfx Ahsyr Tmgo Eel Inlet dimensions: 300 x 300 mm

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Itjdpfx Aeyyy Nxsh Esl

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm Isdpewrm Dtofx Ah Eotl >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer Ijdpfx Aeutuyieh Ejtl - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. Itjdpsuqb Emofx Ah Eol The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: Iedpfxsw E Hpvj Ah Eetl • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Itjdpfx Asvrckqsh Esl For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, Precision lathe with cycle automation for chuck and shaft work, digital drive technology (Sinamics S120) and a Siemens Sinumerik 840D sl control running WEILER's operator-oriented SL2 software. Distance between centres 2000 mm, swing over bed 570 mm, spindle bore 83 mm, main drive 20/17 kW up to 2500 rpm. Year of manufacture 2022. Itsdpfx Aszl Ipneh Eol

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Itjdpfx Aswhzdmoh Eel Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm Ijdpfexfwckjx Ah Estl turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm Ijdpfxexacg Ro Ah Eetl tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe Ijdpfxjxaccxo Ah Estl - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall