Used Watech As High Pressure Washing Machine / Pump for sale (85,906)

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Fodpfx Ajx Ecwmskyopn Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: used, Year of construction: 1992, machine/vehicle number: 1464435, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01)Baujahr / Year 1992 - SN. 1464435 Frequency 50 Hz Speed 1390 min power required 0,58 kW Fpjdpeiwu Elofx Akyen inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: 04.04.40, Technical characteristics: # Payload Capacity: Free conveyor, 350 mm width / 250 mm height # Tank capacity: 1 tank, 250 L # Washing chamber capacity: spraying nozzles in all directions in 3 consecutive steps # Conveyor speed: approx. 0.4 m/min # Eco-friendly operation: Solvent-free, uses water-based detergents. # Average load weight approx. 25 kg; maximum 50 kg # Mechanical weight: 4500 Kg Fpedoxx N Sdopfx Akysn Electrical Equipment # Operating voltage: 400Vx3 # Connected power: 60 kW / rated current 65A Dimensions # Machine dimensions (L×W×H): 5000 × 2000 × 1700 mm Equipment consists of: # Main machine, manual loading/unloading (Loading height approx. 930 mm) Machine status: WORKING

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Fsdpfx Akox Hff Seyspn

Condition: used, Year of construction: 1978, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker SV 2.130/1Baujahr / Year 1978 - SN. B676219 Frequency 50 Hz Speed 2900 min power required 3 kW inlet capacity 130 m3/h max. vacuum 195 m/bar Fsdpfxoiwu Epj Akyopn Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 Fodport Unwofx Akyjpn - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Fjdpfx Aozhualskyopn Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm workpiece height max.: 400 mm total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm * Fpedez Hfl Topfx Akyen

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 Fsdjzb Evlspfx Akyjpn MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Year of construction: 2016, condition: excellent (used), Belimed WD 290 Fpsdozrfraspfx Akyen Washing machine / cleaning and disinfection unit This device, made of stainless steel – with an exhaust air condenser (option with a higher design) – is specifically designed for cleaning laboratory glassware, infusion bottles, production parts, and similar items. The WD 290 is available with two automatically operated, vertically moving full-glass sliding doors for visual inspection during the entire processing cycle. Continuous process reliability is also ensured. The machine itself monitors all relevant performance parameters via an independent process data monitoring system. Loading is done manually through a vertical glass sliding door located on the front of the machine. The items to be cleaned (laboratory utensils, laboratory bottles, etc.) are placed on the loading carrier (nozzle car). The nozzle system consists of two rotating external washing arms (top and bottom), through which the individual media, such as washing, rinsing, and cleaning solutions, are passed. The rinsing medium is located externally and fed in depending on the program selection. The WD 290 is equipped with an electric heater for the washing chamber (22 kW) and the dryer (10.5 kW). The usable interior space of 69 x 63 x 80 cm has a capacity of approximately 350 liters (gross: 430 liters). Operating consumption values: Potable water approx. 40 l/min Hot water approx. 40 l/min Cold water approx. 40 l/min The system is operated via the panel on the front of the machine. English and German are available as operating languages. By default, 9 pre-programmed cleaning programs are stored.

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Fpsdpfx Ajxcx A Tekyjn

Year of construction: 1975, condition: used, We are offering this used Milnor 600-0653 A CN washing machine, manufactured in 1975. Y-shaped, with a capacity of 50 kg each, and capable of loading and unloading from both sides. Manufacturer: Milnor Model: 600-0653 A CN Serial number: 25005374882 Year of manufacture: 1975 Fjdpfxoz Egais Akyepn Maximum speed: 625 rpm Maximum capacity: 165 kg Steam (min): 2.0 bar Steam (max): 7.8 bar Water (min): 0.3 bar Water (max): 5.0 bar Air (min): 5.8 bar Air (max): 7.5 bar Rated current: 25.3 A Rated voltage: 380 V Number of phases: 3 ~ If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Fpjdpfx Aeyuty Sjkyjn Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), functionality: fully functional, fuel: diesel, For sale: Fpsdpfjzvc A Rjx Akyjn 2 oil-powered high-pressure cleaners, including accessories, extraction system, oil tank, and remaining oil. The system is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. Location: Neusäß, near Augsburg. Condition and dimensions can be seen in the pictures.

Condition: used, Year of construction: 2022, Used vertical glass washing machine, NEPTUN Type LVTop 1642-20, Year 2022. Fpedpfx Ajz H Nc Njkysn

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Fsdpsw Hxiwofx Akyepn Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: good (used), Technical data are shown on pictures. Fpodpfxjp N Aq Ho Akysn

Condition: excellent (used), Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), - 2 pcs. of air knives, - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. Fsdpfx Aksy Na Rnjyjpn The speed of movement of the conveyor is regulated by inverter Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately

Condition: excellent (used), Year of construction: 2009, Vertical glass washing machine Maximum working height: 1300 mm Open top Working direction: from left to right Fpodpfey Uhmujx Akysn 4 brushes (2 pairs) Glass thickness: 4 - 12 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested As is Available immediately See video

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine Fjdpfx Aksikrtqeyjpn - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Condition: used, Year of construction: 1992, machine/vehicle number: 1460773, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01)Baujahr / Year 1992 - SN. 1460773 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fpodpfjh Ax E Tex Akyon

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm Fpedpjwmnhpsfx Akyen - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160409, Offer 26217 Technical specifications: - Drilling capacity in full steel ST 60: 40 mm - Thread cutting ST 60: M 30 - Drill spindle connection: MK 4 - Quill stroke: 200 mm - Drill spindle speeds, stepless: 50 - 2000 rpm - Drilling feed rates: 0.08 - 0.50 mm/rev - Height adjustment of the drill column: 380 mm - Overhang: 950 mm Fpsdpfoz Arnijx Akyon - Travel of the upper slide: 590 mm - Table size: 1200 x 500 mm - Drive: 400 V / 4.5 kW - Space required (approx.): W 1200 x H 2400 x D 1700 mm - Weight (approx.): 2700 kg - Includes: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots, vertical, on the left side of the machine - Various accessories

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW Fodpfxjticdle Akyepn p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Fedpfx Akeyhgnisyepn