Used Topper Vertical Machining Center for sale (68,654)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,160 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 610 mm, table length: 1,320 mm, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 7,000 kg, tool length: 200 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine was not used for mass production. Accuracy: ±0.01 mm. It has been regularly maintained, both electronically and mechanically, e.g., new ball screws were installed one year ago. Equipped with an oil mist separator. Hodpfx Agey T Nggj Uon It is in daily use until the end of June 2026 (and can be viewed in operation until then). Net price.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Hsdpey T Iwqefx Ag Usn Chip conveyor, 3D measuring probe, Simulation graphics, Pocket with islands, Synchronous tapping drill, Helix, 3D option, NC / Dialog mix, Surface selection, Tool change optimization, Tool + material database, X-axis bearing likely defective.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Year of manufacture: 2002, Control system: Ultimax 4, Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Ramping/helix plunging, Advanced Velocity Control, Hedpfx Agey T Iuvj Usn Z-axis cover defective.

Condition: new, Main Motor Power 15/18.5 kW Table Size 2000x900 mm T-slot Size 5/22/165 mm Table Load Capacity (Max.) 1600 kg X, Y, Z Travel 1800, 900, 600 mm Spindle-Table Distance 112-712 mm Spindle-Column Distance 950 mm Spindle Speed 10,000 rpm, Direct Drive Spindle Taper BBT50 Spindle Diameter 190 mm X, Y, Z Rapid Traverse Rate 12/12/12 m/min X, Y, Z Motor Power 4.5/4.5/4.5 kW Cutting Feed Rate 8000 mm/min Magazine Capacity 24 Stations, Arm Type ATC Max Tool Diameter 110/220 mm Tool-to-Tool Change Time 2.91 sec Control Unit Mitsubishi M80V - Fanuc 0i-MF PLUS Drive and Encoder Mitsubishi - Fanuc Hedpfxjy T H Sme Ag Uen Main Motor Torque 143/236 Nm X, Y, Z Guideway Load Capacity 77.8/159 Nm X, Y, Z Guideway 55/45/Box Type mm X, Y, Z Leadscrew Diameter 55/55/55 mm Positioning Accuracy +/-0.006 Repeatability of Positioning Accuracy +/-0.004 Required Total Power 34.5 kW/40 kVA Machine Dimensions 5900x4300x3500 mm Net Weight 16,000 kg

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Hsdpfey T Ekbsx Ag Uon Weight: 4,000 kg

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 Hsdpsyyqtuofx Ag Uon weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Cooling: Water with corrosion protection Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMG MORI ecoMill 600 V Hjdpsy Saazefx Ag Ujn Year of manufacture: 2016 Control unit: SIEMENS 840D Travels: 600 x 560 x 510 mm Table size: 900 x 560 mm Spindle mount: SK40 Max. spindle speed: 12,000 rpm Tool changer: 30 positions Total weight: 5,000 kg Various accessories

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] Hjdoy Tzc Hopfx Ag Ujn - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 762 x 516 x 570 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 36 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 - Tool exchange time : 1,3 [sec] PALLET CHANGER - Pallet size : 860 x 570 [mm] - Pallets number : 2 - Pallet exchange time : 5 [sec] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 40,25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3130x3260 [mm] - Machine height : 3130 [mm] - Machine weight : 9200 [kg] EQUIPMENT Hjdpfsy Tzcyjx Ag Uen - CNC : Fanuc 0i-MD Interface : PCMCIA, RS232 / RJ45 - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS Hodpjy Tzctefx Ag Uon - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle speeds : 12000 [rpm] - Spindle power : 18 [kW] LINEAR AXES - Travels on X/Y/Z axes : 800 / 700 / 510 [mm] - Rapid traverses rates (X/Y/Z) : 35 / 35 / 35 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS Hodpfx Ajy Tzcgjg Ujn - Travel : 360 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 TABLE - Table dimensions : 610 x 530 [mm] - Maximum weight upon table : 350 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4.000 x 2.700 [mm] - Machine height : 2.600 [mm] EQUIPMENT - CNC : Hurco Ultimax - Interactive programming - Electronic handwheel - Coolant tank

Condition: used, Year of construction: 2010, x-travel 800 mm y-travel 600 mm z-travel 500 mm control Heidenhain iTNC 530 Hodpfx Aey Ay Itog Ujn weight of the machine ca. 8300 kg

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Hedey Tx Nqepfx Ag Usn

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, Heidenhain TNC530, 4th axis rotary table spindle 20,000 rpm, HSK 63 table 850x530 mm travels 600x450x450 mm 30-tool changer weight 6,500 kg Hodpfxow Dc Irj Ag Uen

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 560 mm, feed length Y-axis: 410 mm, feed length Z-axis: 410 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece length (max.): 650 mm, workpiece width (max.): 450 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 250 kg, total height: 2,500 mm, total length: 2,000 mm, total width: 3,000 mm, table width: 450 mm, table length: 650 mm, table load: 250 kg, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, tool length: 200 mm, tool diameter: 77 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, This machine was not manufactured for mass production. Accuracy: +-0.015 mm. It has been regularly maintained, both electronically and mechanically; for example, it received new ball screws and linear guides two years ago. Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be inspected while in operation until then). Hodey Tv Nnepfx Ag Uen

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW Hedpfoy Tvw Esx Ag Uon DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 620 mm, table length: 700 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, MIKRON VCE 600PRO VERTICAL MACHINING CENTER, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN iTNC 530 ELECTRONIC HANDWHEEL TRAVELS: X 600, Y 500, Z 540 MM TABLE SURFACE: 700 x 620 MM 24-TOOL RANDOM TOOL CHANGER SPINDLE AT 10,000 RPM, 18 KW SPINDLE COOLING DUAL CHIP CONVEYOR Hedpey Tvr Njfx Ag Uon LINEAR SCALES INTERNAL COOLING AT 18 BAR TOOL MEASURING PROBE

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 550 mm, table length: 380 mm, Equipment: documentation/manual, FANUC ALPHA T14iFb VERTICAL MACHINING CENTER, MANUFACTURED IN 2015 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 500, Y 400, Z 330 MM TABLE SURFACE: 550 x 380 MM DIRECT DRIVE SPINDLE, 24,000 RPM SPINDLE COOLANT SYSTEM Hjdpfx Aey Tvnwog Uen

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 410 mm, table length: 850 mm, number of slots in tool magazine: 21, Equipment: documentation/manual, FANUC ROBODRILL ALPHA D21LiB5 MACHINING CENTER, YEAR OF MANUFACTURE 2016 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 700, Y 400, Z 330 MM TABLE SURFACE: 850 x 410 MM DIRECT DRIVE MOTORIZED SPINDLE, BBT 30, 10,000 RPM 21-TOOL AUTOMATIC TOOL CHANGER Hodpfoy Tvfcox Ag Uon 4TH-AXIS DIVIDER WITH DIRECT DRIVE LASER PROBE FOR TOOL MEASUREMENT INTERNAL COOLANT SYSTEM SPINDLE CHILLER

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 Hedey Tvbkepfx Ag Ujn PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: excellent (used), Year of construction: 2008, Opportunity to purchase this outstanding 5-axis HERMLE C30U including an additional tool magazine ZM157. This machine is in good condition with 20093 spindle hours on the counter. Machine can be inspected in operation upon appointment in the Belgium. Availability: 10/2026 Included: Magazine expansion: 157 positions (189 positions in total) Linear axes Standard version NC rotary table: ø280 6-fold rotary feedthrough A-axis position center Y = 300 IKZ 40-80 bar Scrap belt conveyor Blow-cleaning device Automatic cab door Manual cab roof Polycarbon safety windows Rotating transparent window iTNC electric heat compensation iTNC electronic handwheel Hedpfx Aey Tulujg Ujn BLUM Tool breakage detection A1 Coolant gun CNC control Heidenhain iTNC530 Max. spindle speed 18,000 rpm Spindle taper HSK-A63 DIN 69063 Travel paths X-Y-Z 650- 600- 500 mm Tool Magazine extension 157 positions (189 positions in total) Tool diameter 80 mm Tool diameter with adjacent clearance 125 mm Max. tool length 300 mm Max. tool weight 8 kg Max. magazine load 1256 kg Table plate ø 280 mm Center bore ø 32 H7 Swivel range A-axis = +/- 115° / C-axis = 360° Table load capacity 300 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), functionality: fully functional, JOHNFORD 2VS TURRET MILL Excellent Condition! • R8 spindle • 42" x 9" table • 2-axis DRO • Work light • Coolant Hsdpfx Agey Tt S To Usn Machine cleaned and serviced Price: €4,250 ex works JOHNFORD 2VS FRÄSMASCHINE Ausgezeichneter Zustand! • R8-Spindel • 42" x 9" Tisch • 2-Achsen-Digitalanzeige (DRO) • Arbeitsleuchte • Kühlmittelanlage Maschine gereinigt und gewartet Preis: 4.250 € ab Werk

Condition: new, Year of construction: 2023, 1050 mm 600 mm 600 mm 1200x600 mm ISO 40 10.000 U/min Hedpowp Tf Sjfx Ag Ujn

Condition: new, Year of construction: 2023, 1050 mm 600 mm Hsdpfx Agswp Tb Ts Ujn 600 mm 1200x600 mm ISO 40 12.000 U/min Motor Capacity 7,0/10,5 kW

Condition: new, Year of construction: 2026, 1100 mm 650 mm Hsdpfx Agsx Urtxs Ujn 610 mm 1200x6000 mm BBT 40 12.000 U/min Motor Capacity 7,5/11 kW max. table load 1300 kg