Used Tobacco Cutting Machine Prototype for sale (66,954)

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): Prsdpsyuvciefx Adlec CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Prsdpfxjy Nl U Se Adloc

Year of construction: 2006, condition: excellent (used), functionality: fully functional, 1 used cutting and punching machine Prsdpfez I Uf Sex Adloc Manufacturer: BOGRAMA AG, Switzerland Type: BSM 450/220/15/Plus Year of manufacture: 2006 Machine No.: 232/06 Technical data / Equipment: - Cutting and punching machine - Working width up to approx. 450 mm - Product width up to approx. 220 mm - For cutting, punching and perforating - Punching thickness with Servo-Plus version up to max. 4 mm - Pneumatic connection: max. 6 bar - Robust design for professional use in post-press processing The technical specifications are based on the BOGRAMA data for this machine series; individual values may vary depending on the equipment of the specific machine.

Condition: used, Year of construction: 2013, operating hours: 4,400 h, For sale is a waterjet cutting system, STM WS 4020, in good condition, with a simple design, including a BFT Ecotron 40.37 high-pressure pump. Pjdpfxjz Rkn Ao Adlerc

Condition: new, Year of construction: 2024, Guowei 52 - available immediately on stock in Europe Cutting width CM 52 Max.cutting height without assistance pressing plate CM 7.5 Max.cutting depth CM 52 Min cutting depth without assistance pressing plate CM 2 Extended length of working table CM 47.5 Height of working table CM 87-90 Machine width including side working table CM 79 Total length of working table CM 120 Cutting speed R/MIN 15 Manx. Paper pressure N 7000 Power of main motor KW 2.2 Predpfx Adou Nxd Sjloc Motor for paper feeding KW 0.2 Machine weight KG 370 Overall dimension CM 137*92*146

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6911018, Polar 92 EM-MON paper cutting machine, with air table, light barriers, and programmable control. Machine number 6911018, manufactured in 1998, in good condition, immediately available. Pedpfez Ind Ujx Adlorc

Condition: used, Kraus and Reichert Kuris KVS700 Cutting Knife Machine, Fabric Cutter, Textile Item condition: Used and tested for functionality. _RD 6 kg Textile Machines Find more textile machines – new and used – in our shop! International shipping costs available upon request! Psdpfxopitkgj Adljrc

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 911 kg traversing speed 80 m/min dimensions of the machine ca. 5600 x 2260 x 1960 mm 1. BodorPower 6 kW laser source 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Bodor oxygen control valve and nitrogen control valve 7. Bodor Lightning perforation technology 8. 21.5-inch touchscreen monitor Pjde Agpg Uopfx Adlsrc 9. Automatic cutting gas pressure adjustment 10. Active anti-collision function 11. Intelligent vibration protection 12. Burn-resistant mineral cast housing 13. Bodor Mango® ergonomic remote control 14. Gas-saving nozzles with stable flow 15. Smart maintenance reminder 16. Wi-Fi internet connection 17. Smart alarm for anomalies 18. Water cooling 19. Wear parts kit 20. Exhaust system 21. Nitrogen proportional valve 22. Oxygen pressure gauge/nitrogen pressure gauge MAX. SHEET THICKNESS, CARBON STEEL (mm) 20 MAX. SHEET THICKNESS, STAINLESS STEEL (mm) 18 MAX. SHEET THICKNESS, ALUMINUM (mm) 14 RATED POWER (KW) 30.6 MAX. START-UP CURRENT (A) 58.1

Condition: new, Year of construction: 2026, tube diameter 8 - 230 mm workpiece weight 300 kg weight 2450 kg dimensions of the machine ca. 9374 x 1872 x 2285 mm Technical Specifications: Max. diameter of round tubing (mm): 8 - 230 Max. diameter of square tubing (mm): 8 - 230 Rectangular tubing (mm): 8 - 230 Profile (mm) Angle steel: 30 - 140 Channel steel: 50 - 140 I-beams: 100 - 140 H-beams: 100*100 - 140*140 Max. pipe material length (mm) 6500 Max. cut pipe length (mm) 3000 Max. workpiece weight (kg) / (kg/m) 300 / 46 Max. acceleration 1G Shortest remaining material (mm) 70 Positioning accuracy (mm) 0.05 Repeatability (mm) 0.03 Max. material thickness, carbon steel (mm) 16 Max. material thickness, stainless steel (mm) 12 Configuration 1. BodorPower laser source, 6 kW 2. BodorGenius T high-precision laser head with autofocus 3. BodorThinker Tube control system 4. Pneumatic chuck 5. Bodor Lightning perforation technology 6. Adaptive adjustment of jaw clamping force 7. Trailing servo unloading bracket 8. Composite rollersâ??screw roller and trailing pallet rollers 9. Automatic tube inspection 10. Automatic adjustment of cutting gas 11. Active anti-collision function 12. Gas-saving nozzles with stable flow 13. Intelligent maintenance reminder Prsdpfx Ads Agpg Roloc 14. Wi-Fi internet connection 15. Nitrogen proportional valve 16. Water cooling 17. Safety light curtains 18. Wear parts kit 19. Exhaust system 20. 3-meter unloading table 21. Option: Open clamping 22. Option: K-Loader Pro auxiliary feeding device: - Round tube: f25â??f220 mm Square tube: ?25â???160 mm Rectangular tube: 220 = side length = 25 mm, and diameter of the outer circle = 220 mm - Maximum pipe weight: 300 kg - Pipe loading length range: 5,000 mmâ??6,500 mm - Maximum loading weight: 1,800 kg

Condition: used, Year of construction: 2001, saw blade diameter: 150 mm, type of input current: three-phase, Startrite SC160 professional panel saw / sliding table saw, manufactured in 2001. Fully working and available to view/test by arrangement. Features include: • Large sliding table • Sliding crosscut table and adjustable fence • Rip fence • Main saw blade diameter: 150 mm minimum • Blade angle adjustment up to 45° • Professional workshop machine • 3-phase supply • Substantial, heavy-duty machine Prsdpfx Adez Nl Hkslec The machine is in used workshop condition with normal signs of use and cosmetic wear, as shown in the photographs. Collection from Tamworth, Staffordshire. Buyer to arrange suitable collection and transport. Please study all photographs carefully. Further information available on request.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers Psdpfez N Sd Nex Adlorc – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: used, Year of construction: 2012, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of Manufacture: 2012 Working Area: 3,000 x 13,500 mm Pedpfxez H I Aus Adljrc 1 Plasma Torch with Kjellberg HiFocus 161i Power Source Automatic Gas Console 121026ä

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm Prsdpfx Adsz N Dquslec This table has NO option for low e deletion

Condition: used, Year of construction: 2013, KONGSBERG CUTTERS HAVE SUPERB BUILD QUALITY, COMPREHENSIVE TOOLING, CUTTING ACCURACY AND GREAT SOFTWARE REFURBISHED 2013 KONGSBERG XP24 CUTTER Excellent condition 3200 x 1680mm work area 1Kwatt Router for milling (refurbished new spindle) Pjdpsz S Hx Hsfx Adlsrc Heavy duty tool / large & small crease wheels V Notch tool, high force knife, oscillating knife I cut software / PC New conveyor belt recently fitted 3 Phase extractor, 6kwatt Busch vac pump & silencer

Condition: ready for operation (used), Year of construction: 1988, technical documents Predpfx Asyagn Tsdljc automatic feeder tools and documentation

Condition: used, functionality: fully functional, Year of construction: 2007, control type: CNC control, For sale: CO₂ Tube Laser BLM Group Adige LT712D The machine is fully operational and in daily use in production. Inspection and testing on site are possible. The laser source ROFIN RF tube DC025 has been replaced with a new one. The new source has only 2386 operating hours. Specifications: Model: BLM Adige LT712D CO₂ tube laser Year of manufacture: 2007 Predpfx Aoy R Tt Sodlec Laser source: Rofin RF tube DC025 New laser source operating hours: 2386 h Total machine operating hours: 89186 h Automatic tube loading and unloading CNC control Autofocus cutting head Suitable for cutting round, square, and rectangular profiles Automatic profile centering and measurement devices Professional industrial construction Scope of supply: Rofin DC-K laser integration AK-HP 591-LT712 cutting head 5” focusing system 6500 mm tube system Automatic unloading module The machine is suitable for the production of metal constructions, furniture, automotive, tubular structures, and other metal products. If you have any further questions, we will be happy to answer them.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Pedpfxoq H Sqde Adlorc Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Psdpoz H Nzfofx Adljrc Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg

Condition: used, Year of construction: 2012, Plasma power source for plasma cutting system Manufacturer: Kjellberg Podpfx Adoz Ipnuolsrc Type: HiFocus 440i Year of manufacture: 2012 Automatic gas control unit Includes cooling unit KWE360 Includes hose package with torch and cable 191026ä

Condition: ready for operation (used), Year of construction: 2005, The Wohlenberg 76 (2005 model) is a robust, high-precision industrial paper guillotine designed for cutting paper, cardboard, plastic, foil, and leather. Technical SpecificationsMaximum Cutting Width: 760 mm (29.9 inches)Maximum Feeding Depth: 760 mmMaximum Clamp Opening (Stack Height): 110 mmTable Height: 870 mmBackgauge / Saddle Speed: 30 cm/sTotal Machine Weight: Approximately 1,200 kg to 1,650 kg (depending on specific table configurations)Electrical Requirements: 3-Phase, 380V, 50 HzKey Operational FeaturesControl Interface: Equipped with an LCD color display and an alphanumeric keypad supporting multiple languages.Automation: Features a built-in autoprogrammer capable of storing up to 1,500 custom cutting programs. Data Integration: Table Setup: Chromed central air table complemented by chromed side air tables for easy stock manipulation.Hydraulics: Adjustable hydraulic pressure clamping to match the density of varying materials.Safety EquipmentInfrared Safety Grids: Light beam guarding system protects the operator during the cutting cycle.Two-Hand Control: Requires simultaneous two-handed engagement to activate the knife safety sequence.Mechanical Safety: Includes rear table guarding and a physical pressure bar. Prjdpfxjzavlbo Adljc

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 4,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. - incl. 2D Bevelcut function for weld seam preparation or production of countersunk holes (see image) Please also note our attractive leasing/hire-purchase offers. - Machine without automatic pallet changer! The loading takes place on the long side of the machine. - very space-saving - extremely energy-efficient cutting system Podpfxsyacqwe Adlorc - only approx. 4 x 4.5 meters of installation area - 3kW laser source from MaxPhotonics (G5/CE version) - Laser generator with socket efficiency better than 30% - suitable for aluminum - Top quality, arrange a viewing now! Cutting of steel sheet up to 22mm (maximum) Cutting of stainless steel sheet up to 12mm (maximum) Cutting of aluminum sheet up to 10mm (maximum) Cutting of brass sheet up to 8mm (maximum) - Travel range 1500 x 3000mm (for large format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures of the cutting head - large laser protection windows for observing the cutting process - Extensive cutting parameter file - incl. box module - very easy to operate - powerful laser cooler - Machine control in German - German service and spare parts supply - powerful laser cooler - Filter extraction is available as an option (5.5kW with frequency inverter for pleasantly quiet operation) A lease or hire-purchase is possible via our financing partner. The following options are also available: - automatic nozzle changer (optional) - automatic nozzle centering (optional) - Sheet metal recognition and part nesting via camera system CypVision (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap management, etc. (optional) - ERP system combinable with all your other sheet metal processing machines (optional) The sale is exclusively to commercial enterprises. Delivery / consultation / sale only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Do you need a different laser power, a different table shape or table size? No problem. I would be happy to create a suitable offer. e.g. 2kW machine from 29,990 euros Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air-cushioned) • Light barrier Podpfx Ajytb A Sedlerc • Programmable • Three extra spare blades • In production • Available: 05/2026

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW – Year of manufacture: 2017 – Laser source: IPG – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m – CAD software – Nesting software – Pipe laser software Podpfxevyhczo Adljrc – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Podjzn Hp Sjpfx Adljrc Type: HiFocus 80i Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose package and torch Manual gas control panel 191026ä

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours: approx. 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with universal gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without fume extraction Predpfxoypdl Ij Adloc 1 x nesting software Asper Win Basic + automatic nesting on the machine control system 191026ä Universal gas = enables the gas to be changed to adjust the cutting quality and cutting speed to the material.