Used Stierli-Bieger Bending Machine for sale (65,633)

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Guodpfx Asuwrv Dok Uog

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Guodszka H Ajpfx Ak Usg

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Godpfx Aoyttwbsk Usug

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Gjdpfx Aksycwtfj Ujug

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Godpfowwlkiox Ak Ueug

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Gusdpfx Aeyttv Rek Uog

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Guedpfx Aksrc Hiis Ujg

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Gujdpfx Akoxl Up Ue Ueg

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Guodpfxoxcx Atj Ak Uog

Condition: new, Max. capacity steel tube (mm) 32x2 Max. capacity stainless steel tube (mm) 25x1.5 Max. capacity steel profile (mm) 30x30x1.5 Gedpfxezuklks Ak Ueug Min. Tube (mm) 8 Max. Radius (CLR) 225 Min. Radius (CLR) 20 Control system PLC Max. bending angle (°) 190 Screen 10” PC Windows touch screen

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Guodpfx Aey D A Hnjk Uog Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: good (used), Brand Ercolina Gedpfx Ajw Hx Tvek Ueug Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Guodpsw Hyc Sjfx Ak Uog Weight 2000 kg Power 5 kW

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Guedpfxszt Ir So Ak Ueg Max. steel profile capacity (mm) 80 x 80 x 4 Max. radius (CLR) 300 Min. radius (CLR) 55 Control system PLC Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm Gjdpfx Aoztvgwsk Usug - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: new, CNC 76R1 Max. capacity for steel tube (mm): 76x5 Max. capacity for stainless steel tube (mm): 76x3 Max. capacity for steel profile (mm): 60x60x3 Max. radius (CLR): 250 Min. radius (CLR): 35 Max. bending angle: 190(°) Godpfxoztpuno Ak Uoug

Condition: new, CNC-38/R3 Gsdpfsztpf Tex Ak Ueug Max. Diameter (max. O.D.) 38 mm Max. Wall thickness 2 mm Max. Diameter (max. O.D.) for stainless steel 438 x 1.5 mm Max. Bending angle 190 (°) Hydraulic pump motor 11 kW Total motor power 22 kW Max. Hydraulic pressure 140 (bar) Mandrel Length 3450 mm Machine Length 5850 mm Machine Weight 3000 kg

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. Gusdpjztckisfx Ak Ujg The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Gedpfohmmfksx Ak Uoug Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Gsdpfjttc Uaox Ak Uoug

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Guodexpqy Djpfx Ak Ujg Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Gujdsya Iaqepfx Ak Ujg Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: Gjdpjzr Nthjfx Ak Ujug - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Gedpfx Aeu Snlkjk Ujug Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, tube bender R 1 ZOPF - without bending tooling Guodpjfiqntefx Ak Uog - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °