Used Salvamac Optimization Cross Cut Line for sale (27,872)

Condition: new, Year of construction: 2026, Cutting height at 90°: 200 mm Knedpfx Anjiy Ry Aeusc Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range, horizontal: 45° - 90° - 25° Miter range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Rotational speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Weight: 490 kg

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Knodpfx Ajydc Tmjnusc Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable to an angle of 45/-45° Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: new, cutting width max 610 mm Kjdpfx Anjyi Hthsusnc Cutting height max 200 mm Saw blade diameter 650 mm Motor output 11 kW

Condition: used, The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Kedpszryuiefx Anuonc Technical data: - Motor: 0.55 kW / 220 V - Cutting height: approx. 50 mm - Cutting depth: approx. 80 mm

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm Knedegnc H Dopfx Anuec strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Knodeixqg Nspfx Anujc Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm coil weight: 40 t Kjdpfeqw Aacjx Anuonc coil ID: 508/610 mm

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Ksdjfhgz Iepfx Anujnc Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Year of construction: 2024, condition: new, - 6.000mm cutting length Knsdjpfcgajpfx Anuec - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Knsdjylxmfspfx Anuec Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Condition: used, Year of construction: 2011, Cross-cut and rip saw Kodpfszuyzzsx Anuenc Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Kjdsu R Sypepfx Anuenc - new exhibition machine -

Condition: excellent (used), functionality: fully functional, Throughfeed band saw for cutting side pieces. Equipped with 6 chain strands with feed dogs. Feed length approx. 1,700 mm. 10 length stops. Saw motor 4.4 kW. Chain spacing: 750 - 600 - 1000 - 1000 - 1000 mm. Kedpfsy T E T Nsx Anujnc

Condition: new, saw-blade dia. 500 mm Cutting height 120 mm Motor output 5,5/7,5 kW Knedpfxowhf Ipe Anuec working length 4100 mm

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake Knedpfx Anjf Sqy Douec - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 2012, Year: 2012/2013 Condition: dobrý Available: Q1 2026 (february) Configuration: - MBO RBF 520 buffer unit - MBO SVC 521C slitting + cutting unit - MBO DFT 560/6 folding unit - 6 buckles - automatic setup - folding rollers - automatic setup - slitter shaft casette - MBO ASP 66 - shingle delivery + pressing unit - MBO X - FW 50 - mobile knife unit Knedox Em Avjpfx Anujc

Condition: new, Year of construction: 2026, warranty duration: 11 months, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Ksdpfxjv Iqaxs Anusnc Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: excellent (used), functionality: fully functional, Double miter saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable at 45°/-45° Motor power: 2×3HP ~2.2kW Saw blades: 330 mm Pneumatic vertical material clamp Kjdoylm Nujpfx Anuenc

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. Knjdpfxjfcdnlj Anuoc The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm coil weight: 10 t Ksdoqw Akmjpfx Anujnc

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm Knsdpsy Nypkjfx Anuec strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Year of construction: 1990, condition: used, A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible. Kedpezyq Tfsfx Anuenc

Condition: used, Built in 1998 CNC motor-controlled Knodpozrxlgefx Anusc Technical data: - Quantity: 2

Condition: excellent (used), functionality: fully functional, Double mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Heads adjustable at angles 45/-45° Ksdpfeyz Tizsx Anuonc Motor power: 2×1.8 kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: excellent (used), For sale is an industrial crosscut saw from the renowned German company Paul Maschinenfabrik GmbH & Co. Model 15 A0 is a reliable and robust machine, perfect for any sawmill, carpentry workshop, or pallet production facility, guaranteeing speed, precision, and cutting safety. ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Paul Maschinenfabrik GmbH & Co, Dürmentingen (Germany) Type / Model: 15 A0 Machine Number (Masch. Nr.): 8621628 Date of Manufacture (Liefertag): 17.03.1986 Motor Power: 3 kW (according to the nameplate, the machine's connected power ranges from 3 kW to 4.5 kW) Supply Voltage: 380 V / 50 Hz (20-25A fuse) Spindle Diameter: 30 mm Dimensions of work tables (included): Left feed table: 240 cm Knedpfxezp Af Sj Anuoc Right discharge table: 180 cm Maximum cutting width: Up to 450 mm - 500 mm, depending on the blade used and the final machine configuration. 🛠️ ADVANTAGES AND MACHINE FEATURES: Hydraulic drive: The saw blade advances hydraulically with the possibility of smooth adjustment, which significantly facilitates operation, ensuring smooth performance and reducing operator fatigue. Integrated clamping and safety: The hydraulic clamping system for the material being cut also functions as a blade guard, guaranteeing the highest safety standards at the workstation. Comfort and efficiency: Very long roller tables allow for convenient handling of even exceptionally long timbers or boards. Solid German construction: Durable construction (Made in Germany) ensuring stability, complete absence of vibrations, and very long service life, even with intensive use in a multi-shift system. 📍 ADDITIONAL INFORMATION: Condition: Used machine, in very good condition and fully functional. The machine is ready for on-site testing and immediate implementation in production.