Used Südmo Butterfly Valve Dn65 for sale (6,678)

Condition: used, Used stainless steel tank / transport container / IBC Previous use: Chemicals Article number: 10888 Capacity: 1,300 liters Design: Vertical in galvanized stacking frame Material (product contact): 1.4301 / AISI 304 Manway: 400 mm Iedpfx Aex Tta Rshyobc Construction: Single-walled Operating pressure as per nameplate: +0.10 bar Tank dimensions: Total width: 1,040 mm Total length: 1,240 mm Total height: 1,850 mm Foot height: 165 mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Features: Nameplate: yes Outlet diameter: 250 mm Discharge valve: Butterfly valve Distance from outlet to floor: 180 mm Empty weight: 266 kg

Condition: excellent (used), Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve Ibodpfjx R R Iasx Ahyoc -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. Iedpfox D Df Nex Ahysbc - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: new, Year of construction: 2020, functionality: fully functional, For sale: 3 × new Proxcys BCC600 chromatography systems (year of manufacture 2020, original packaging, CE certified) We are offering three unused, originally packaged Proxcys BCC600 batch chromatography columns from 2020. The units are brand new, fully CE-certified, and comply with GMP requirements for pharmaceutical and biotechnological applications. Technical data (per unit): • Manufacturer: Proxcys • Model: BCC600 • Year of manufacture: 2020 • Condition: New, in original packaging • CE marking: Yes • Operating pressure: 0.4 bar • Max. temperature: 30 °C • Dimensions (L × W × H): 1810 × 2000 × 2350 mm Iedjxyp Rijpfx Ahyjbc • Weight: approx. 1,600 kg Construction & features: • High-quality chromatography column made of stainless steel 1.4435 (316L), electropolished (Ra ≤ 0.8 µm) • Acrylic column (PMMA, USP Class VI) with integrated 360° CIP spray system • Electromechanical lifting mechanism with 3 Siemens load cells • Three-blade paddle agitator with frequency converter • BioControl connections (DN15–DN65) for product, buffer, and safety applications • Safety valve, pressure gauge, sensors for pressure, level, and temperature • PLC control system with HMI, emergency stop, status lights, and acoustic signal module Special features: • New & in original packaging – never put into operation • GMP-compliant design • Ideal for protein purification, chromatography, downstream processing, and pharmaceutical production • Complete technical documentation included (Functional Specification, P&ID, Drawing, Electrical Schematic) Availability: 3 units Location: Germany Price: On request. The original new price in 2020 was €320,000 per unit; all three units together were €960,000.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 Ibsdsx Ryhiopfx Ahyec -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm -Weight: 3 kg

Condition: used, Stainless steel rotating valve. Ibsdpfxex Rz Rxo Ahyjc Diameter 250 mm. Motor 0,75 kW, IP 55.

Year of construction: 1996, condition: used, Manufacturer: BSIModel: NGV 70Manufacturing year: 1996Type: containerCapacity: 2000 LMaterial: AluminiumEmptying: butterfly valve Iedsx R Ardspfx Ahysbc Dimensions : 140x115x220 cm

Condition: used, Year of construction: 1973, Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Conformity certificate in 2001) Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation: mechanical Previous use : Paint 220 L tank Mixing tool: Ø 705 mm butterfly / cloverleaf type Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm Ibjdpfsx R Azrsx Ahysc

Condition: used, Manufacturer: Grenier - Charvet Model: E 25 Type : High viscosity paste mixer   Motor power : 25 CV - 18 KW Speed variation: mechanical Previous use : Painting Agitation tool: approx. Ø 800 mm butterfly / cloverleaf type Ibsdpfx Aox R Azxjhyoc Vessel clamping: pneumatic Vertical movement: hydraulic unit

Condition: used, Year of construction: 2015, Manufacturer: Segler Segler Model: Andocksystem 40255B Ibedpfxox R A Irj Ahyoc Type: Big-Bag emptying / dumping station Year : 2015 Classification: Atex 112/30 135°C Materials: Stainless steel Connections : 1x DN300 Big-Bag anchoring system with pneumatic clamp, including 2-pneumatic manual override 1x Ø300 opening with DN65 lance, clamp connection and spray head for cleaning the anchoring system 1x R 1 1/2" sleeves for pre-assembled filling indicators 1x DN65 flange, including ball valve as outlet Hopper with external electric vibrator Dimensions: 142 x 178 x 142 cm Weight: 260 kg

Condition: used, Quantity available : 1 Iodpfxjx R A Skj Ahyobc Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 80 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve manifold -Solenoid valves: VUVS-L20-M52-MD-G18-F7 10 pieces -Solenoid coil: VACS-C-C1-1 -Connection block: VABM-B10-20E-G38-10 -Individual components: see photos -Price/Sale: complete -Dimensions: 320/145/H100 mm Ibedpoxvyn Rjfx Ahyjc -Weight: 4.6 kg

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold MPA-MPM-VI Ibsdpfx Ahexvy Evsyjc -Solenoid valves: 537953 / 537955 / 533503 -Electronic modules: VMPA2-MPM-EMM-4 -Individual components: see photos -Price/Fee: complete -Dimensions: 275/130/H65 mm -Weight: 2.3 kg

Condition: used, machine/vehicle number: H21202Y00369, Year of construction: 2021, operating hours: 16,945 h, load capacity: 3,500 kg, lifting height: 5,495 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,495 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex mast Drive type: LPG UVV certificate valid until: 09/2027 Next service due in: 853 hours Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 3,424 mm Own weight: 5,523 kg Operating hours: 16,945 h EQUIPMENT Facelift model Former Linde full-service unit Duplex free-lift mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning (AC) Cabin heater Windshield wiper LED work lights front and rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Iedpfx Ahez Nn A Ueysbc Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 40

Condition: used, machine/vehicle number: H2X388H00203, Year of construction: 2017, operating hours: 11,137 h, load capacity: 3,500 kg, lifting height: 4,100 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,100 mm Mast type: Duplex mast Free-lift mast: Without central hydraulic cylinder Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Ibsdpfxez Npb Eo Ahyoc Battery capacity: 775 Ah Battery voltage at rest: 85.0 V Operating hours: 11,137 h Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,500 x 2,904 mm Service valid until: 07/2027 EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Fork positioner Side shifter Full cabin Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected within the specified time. Any outstanding storage fees must be paid in full before collection. Lot number: 77

Condition: used, machine/vehicle number: H2X387V04014, Year of construction: 2019, operating hours: 12,756 h, load capacity: 2,500 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,430 mm Load capacity: 2,500 kg MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: Lithium-ion Battery voltage: 90 V Battery capacity: 268 Ah Battery year of manufacture: 09/2019 Measured battery voltage in idle state: 95.5 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,824 mm Dead weight: 5,256 kg Ibodpfxoz Npgue Ahyec Service valid until: 09/2027 UVV (Occupational Safety and Health) valid until: 09/2027 Operating hours: 12,756 h EQUIPMENT Former Linde full-service unit 3rd & 4th valve Full cabin Radio Heater Windshield wiper Tilt angle display Non-marking white tires LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety Light, front Safety Light, rear Rear view camera Fork positioner Side shifter All dimensions are approximate values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 87

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Isdpfoz Nir Rex Ahysbc Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: new, Year of construction: 2026, machine/vehicle number: PB11032, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, ram plate width: 1,700 mm, ram plate length: 3,200 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,600 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1100 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2600 mm 5 Stroke 200 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Ibodpfx Aez H Skvshysc Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,631 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 125 mm, fuel type: electric, mast type: duplex, fork carriage width: 1,070 mm, fork length: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,700 mm Free lift: 125 mm Fork length: 1,400 mm Fork carriage width: 1,070 mm Fork width: 161 mm Fork thickness: 57 mm Fork adjustment range: 560–2,080 mm MACHINE DETAILS Mast type: Duplex Power: 20 kW Front tires Tire type: Non-marking Tire size: 23 × 10–12 Tire condition: 40–60 % Rear tires Tire type: Non-marking Tire size: 18 × 7–8 Tire condition: 20–40 % Battery voltage: 80 V Battery capacity: 625 Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2021 Battery condition: 40–60 % Unladen weight: 5,593 kg Overall length: 2,479 mm Overall width: 1,195 mm Overall height: 2,585 mm Operating hours: 3,631 h EQUIPMENT Load protection grid Push fork Side shifter Fork positioner 3rd valve 4th valve Rear work light Ibedpfxez Hvl Dj Ahyoc Front work light Heater Solenoid valve Full cabin Air conditioning CE certificate Non-marking tires LED lighting Seat Noise-reduced hydraulic pump Panoramic mirror Rear dirt guard Load weight indicator Automatic parking brake Dual pedal Air-suspended comfort seat with fabric cover Spring-mounted cabin Reading light Horizontally and vertically adjustable armrest Side battery changer with access pallet including side battery cover I_Site fleet management including PIN code and shock sensor Smart Access Additional cable inside the mast on the left side for the 5th hydraulic function Radio

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 Ibsdpfx Aozp Rmqehysc - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, machine/vehicle number: H2X386V04476, Year of construction: 2019, operating hours: 24,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork spreader: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery voltage at rest: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: UVV 07/2027 UVV inspection valid until: UVV 07/2027 Operating hours: 24,655 h EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Side fall protection White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support and seat heating Hydraulics: 3rd and 4th valve Side shifter Isdez Nv Ewopfx Ahysbc All dimensions are rounded values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 131

Condition: used, machine/vehicle number: 516221X00500, Year of construction: 2020, operating hours: 7,736 h, load capacity: 1,600 kg, lifting height: 5,000 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,000 mm Fork carriage adjuster: 300–860 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery idle voltage: 50.9 V Service valid until: 06/2027 UVV inspection valid until: 06/2027 Dimensions & Weight Dimensions (L x W x H): 3,300 x 1,150 x 2,150 mm Machine weight: 3,300 kg Operating hours: 7,736 h EQUIPMENT Semi-cabin Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Previously a Still full-service unit Hydraulic functions: 3rd + 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Ijdpfez Nwa Aox Ahyjbc Lot number: 144

Condition: used, machine/vehicle number: 517388V00095, Year of construction: 2019, operating hours: 6,982 h, load capacity: 3,500 kg, lifting height: 4,500 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,500 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive: LPG Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,250 mm Weight: 5,017 kg Next service due in: 901 hours UVV certificate valid until: 07/2027 Operating hours: 6,982 hours EQUIPMENT Former Still full-service unit Fork positioner with side shifter Semi-cab with windshield wiper LED work light (front) LED work light (rear) Orange warning light Comfort seat LPG gas cylinder with quick-change system Hydraulics: 3rd and 4th auxiliary valve Ibsdsz Nwbtepfx Ahyoc All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 148

Operating hours: 12,087 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,760 mm Free lift: available Mast type: Triple mast Fork length: 1,600 mm Hydraulically adjustable forks: available Side shifter: available Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E25L EVO Year of manufacture: 2018 Drive type: Electric Operating hours: 12,087 h Battery: 80 V / 575 Ah Battery year of manufacture: Battery voltage at rest: 84.3 V Self-weight: 4,800 kg Overall length: 4,100 mm Overall width: 1,150 mm Overall height: 2,176 mm Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Full cabin Heater Windshield wiper Fork positioner Side shifter Tilt angle display Facelift model All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Ibodpsz R Dvmjfx Ahyjc If collection is not carried out within the specified period, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 102

Operating hours: 14,594 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: E16L Year of manufacture: 2020 Drive type: Electric Load capacity: 1,600 kg Operating hours: 14,594 h Mast Mast type: Duplex mast Full free lift: Yes Lifting height: 3,145 mm Hydraulics 3rd auxiliary valve: Yes 4th auxiliary valve: Yes, free for fork positioner Side shifter: Yes Battery Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery voltage at rest: 51.13 V Inspections and Service Service valid until: 10/2027 Ijdpjz R Dzcefx Ahyobc UVV (Occupational Safety) certificate valid until: 10/2027 MACHINE DETAILS Own weight: 3,200 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm EQUIPMENT Formerly a Linde full-service machine EVO facelift model Color display Tilt angle indicator Semi-cabin Windshield with windshield wiper Roof window LED work light (front) LED work light (rear) Comfort seat Lumbar support Seat heating Battery charger High-quality charger, year of manufacture 2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 188