Used Round Bending Machines for sale (67,184)

Condition: used, Year of construction: 1999, sheet width 2050 mm Nlsdsztfxispfx Ahkjf plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Nedpfxelc N Spe Ahkelf

Condition: good (used), Year of construction: 1977, HERA UM2 folding machine Brand: HERA Year of manufacture: 1977 Type: UM 2 Control type: Conventional Sheet thickness (mm): 2 mm Working width (mm): 3000 mm Machine weight (kg): 3000 kg Length (mm): 3820 mm Nedszupxcopfx Ahkolf Width (mm): 800 mm Height (mm): 1850 mm

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, overhauled in 2002 Technical data: Nedpfx Ahehrdmbokjlf - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic approach - Drive: 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - including: - Bending angle adjustment - Hydraulic tension - Bending tools

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Nljdpsw Hx Tvjfx Ahkof Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Nledpsza D U Dofx Ahkjf Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1977, machine/vehicle number: 22247, Offered 23250 Technical data: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg - with - Pipe circular saw - Inside and outside pipe deburring device - Pipe necking device - Without tools Nsdpfx Aev Hzr Njhkjlf

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine Njdpfxevwg D Ss Ahkolf The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. Nsdpfx Ahjvwg Hmskelf With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm Nodjztvgwepfx Ahkslf - Various bending mandrels, length: 3000 mm

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Nljdpfjx Ii Hvex Ahkef Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2020, condition: as good as new (ex-display), Roll bending machine with spindle feed and 3 driven rollers. Features: Shaft diameter: 40 mm Working position: Horizontal/Vertical with support Connection: 230V/1 phase with inverter Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Square tube: 50 x 50 x 3 mm Round bar: 35 mm Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Nljdpfx Asgi N Aljhkef Scope of delivery: CE40M3D Universal roll set for profiles Accessories (including control panel with foot control, operating manual) 1 set of plastic rollers for round tubes, 1 1/2" for work with reduced marking.

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Nsdpfxsxl Up Uo Ahkslf

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Nlsdpfx Ahst Dk Ukjkef Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam Nodpfx Aozr Nthohkolf

Condition: excellent (used), CATALOGUE NUMBER 8015 TECHNICAL DATA - Range of diameters of processed pins: 40-140mm - Max. diameter of input material: 210mm - Min. length of input material: 600mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 100mm - Cutting head drive motor: 18.5kW - Feed: + forward/backward - Feed motor: 3.73kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-knife cutting head - 6 smooth draw rollers - Dimensions (L/W/H): 2600x1200x1390mm - Weight: 1700kg ADVANTAGES Nsdoztafkspfx Ahkjlf - Polish production - DTR documentation - Used turning machine, very good condition Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 4,250 mm, power: 19 kW (25.83 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 147 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 3,600 mm, Equipment: documentation/manual, 38x2mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. Nledpfx Ajvurm Hjhkef With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Nledpsya Iaqefx Ahksf Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Nljdpfx Aev Htniohksf Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1972, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Njdszm N Riepfx Ahkelf

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles Nledpfx Aoh S Ti Eshksf -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: refurbished (used), BENDING ROLL MACHINE ROUNDO SHEET METAL LENGHT 2500mm Nlodpohx N Ukefx Ahkjf SHEET METAL THICKNESS 30/25mm 3 ROLLS WEIGHT: 19.000kgr

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets Nljdpfxjpxmaue Ahkef - Roll sets

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm Nlsdpfex Ir Dwsx Ahksf -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm Nlsdozrui Ijpfx Ahkef - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)