Used Riedex Dm 300 M-B for sale (90,736)

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition Laodpfxjvcfhmo Abzsg - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Lsdjz Dp Dbepfx Abzjag Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Lsdjy Hi A Ujpfx Abzsag

Condition: used, functionality: fully functional, power: 257.42 kW (349.99 HP), overall weight: 22,500 kg, Year of construction: 2009, machine/vehicle number: 08-12-987, Conrad Boxer 300 Combi – Flushing and Suction Drilling Rig Lasdpfexrd Rhox Abzjg Specifications Brand/Type: Conrad Boxer 300 Combi (Combi 300HD) Serial No.: 08-12-987 Year: 2009 Weight: 22,500 kg Power: 280 kW Engine: Volvo, installed in 2024 TYPE TD 121 G - 350 PK Drill pipes: approx. 42 pcs, length 5 m, Ø 90/80 mm Flushing and suction drilling system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control Lasdpfsy Samuex Abzjg - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, plate width: 1,050 mm, plate height: 1,035 mm, overall weight: 12,000 kg, Robot W 621-ß077 x/y/z: 550/1200/2530 mm C-axis: max. rotation 90° Core pulls: yes Hot runner controller IMM 8 Control system: MC 4 Ledpfszyfw Ejx Abzoag

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function Lasdpfxozy Hpio Abzog - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Lsdpfxozv Sdko Abzeag Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Lajdpewimvwefx Abzjg Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2019, pressure 100 t Lajdpfx Absv R Hvnezjg chamfer lenght 3050 mm distance between columns 3250 mm Control Delem DA 66T stroke y-axis 300 mm dayligth 590 mm ajustment speed 75 mm/sec Bending Speed 20 mm/sec. backward speed 75 mm/s total power requirement 11 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 4,3x2,0x2,9 m Demonstration machine Y1 / Y2 servo electronic Hydraulic stamp clamping (WILA Premium) Hydraulic die clamping (WILA Premium) including motorized crowning Back gauge system "DENER" X-; R-; Z1-; Z2- axis FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending Rolleri quick-change tools segmented: Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length

Condition: excellent (used), Year of construction: 2007, Battenfeld HM 300/2250S with robot Wittmann W818 / machine in very good technical condition / operating hours: approx. 40.000 h in automatic mode year of construction: 2007 injection unit: screw diameter: 55 mm injection weight: 702.5 g Injection pressure: 2500 bar Metering volume: 772 ccm Clamping unit: Clamping force: 300 t tie bar distance: 710x630 mm size of clamping platens: 1030x1020 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection In the machine is installed new original screw and cylinder Robot Wittmann W818 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, protective housing Dimensions: Weight: 13000 kg Length/width/height: 6.90x1.90x2.40 m Lajdpfozy Ikhox Abzsg Drive: Pumps/motor: 45 kW Heating power: 22,7 kW Total power: 67,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of manufacture: 2007 Internal machine number: 60 Travel ranges: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° Lsdpozwl S Rjfx Abzsag C-axis 360 ° W-axis: 1,550 mm Max. turning diameter: 710 mm Tool holder: HSK 63 Total number of tool positions: 40 Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyor - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper band filter system 500 l - One Touch IGF

Condition: like new (used), Year of construction: 2021, power: 264 kW (358.94 HP), Electric engine: 264 kW Lsdpfx Aownq Dijbzoag Equipped with: Discharge conveyor, overband magnet, radio remote control.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, semi-automatic band saw Lajdpozly Aaofx Abzsg

Condition: used, Year of construction: 1995, BIGLIA B 500 M LATHE POWERED (LIVE TOOLING) CHUCK DIAMETER: 210 mm MAX. BAR WORKING DIAMETER: 70 mm MAX. TURNING LENGTH: 500 mm TRAVELS: X: 220 mm Z: 500 mm Y (tailstock): 600 mm ACCESSORIES: 2 TILTABLE LIVE TOOLS, BRAND ALBERTI 2 RADIAL LIVE TOOLS 3 AXIAL LIVE TOOLS VARIOUS FIXED TOOLHOLDERS CHIP CONVEYOR COMPLETE DOCUMENTATION MACHINE IN PERFECT CONDITION Laedsy A Eanjpfx Abzsg YEAR: 1995

Condition: used, Year of construction: 2008, Deckel Maho DMC 55H duoBlock Horizontal Machining Center Horizontal Machining Center – Deckel Maho Type / Model: DMC 55 H DuoBlock Year of Construction: 2008 Condition: Used Program Run Time: approx. 66,600 hours Spindle Run Time: approx. 46,500 hours Technical Data Travel Ranges X / Y / Z Axes: 560 mm / 600 mm / 600 mm Rapid Traverse (X/Y/Z): 40 m/min Work Table & Pallet Changer (APC) Number of Pallets: 2-position pallet changer Pallet Size: 400 mm x 400 mm Max. Workpiece Weight: 500 kg Max. Workpiece Height: 850 mm Ledpezxc Ewjfx Abzsag B-Axis (Rotary Table): 360° (designed as an NC rotary table, usually with 0.001° resolution) Main Spindle: 12,000 1/min; HSK 63; approx. 38 kW Tool Changer (ATC) Tool Magazine: 40 magazine positions Tool Interface: HSK-A63 Max. Tool Diameter: 80 mm (up to 160 mm with free neighboring positions) Max. Tool Length: 330 mm Electrical Data Power Connection: 400V 3/N, PE 50Hz Power Consumption: 58 kVA Inrush Current: 84 A Max. Pre-Fuse: 100 A DC Control Voltage: 24 VDC AC Supply Voltage: 230 VAC Dimensions, Weight & Control Machine Weight: approx. 11,000 kg to 13,000 kg (depending on magazine size and chip conveyor) Footprint (L x W x H): approx. 5.0 x 3.0 x 2.8 m (pure space requirement without peripherals) Control: Siemens Sinumerik 840D Equipment NC rotary table Tool measurement system BLUM Oil mist separator IFE-2000 Hydraulic clamping system Proportional amplifier Signal light Coolant system 980 l Coolant gun Rotoclear Chip conveyor Master probe OMP60 Operating mode 4 Quotation item: Transport costs in a separate offer

Condition: ready for operation (used), Year of construction: 2018, This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. • Gap between the upper tool and the bending beam is a maximum of 260 mm • The top tool cannot be segmented • Operating voltage: 400/50 V/Hz Lsdpfx Absx D Rf Aozjag • Power: 7.5 kW • Operating pressure: 150 HPa • Control type: PLC • Control voltage: 24 VDC • Bending capacity: sheets up to 6 mm thick and 3,000 mm wide • Hydraulic clamping • Two front stops • Programmable rear stops

Year of construction: 2020, condition: used, A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection by prior arrangement is possible. Lodpfjz Agggex Abzjag

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm • Tool turret: • Type: OKUMA • Tool positions: 12 • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation • Right-side chip conveyor • Finished-part catcher arm Lsdpezpwu Ujfx Abzsag • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain MillPlus IT Travel ranges X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 rpm Ledpfez Dk I Usx Abzsag Tool magazine for 60 tools, SK 40 NC rotary table integrated into a fixed table, diameter 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swiveling range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theoretical pump output), tank 600 l Paper band filter Rotating viewing window Chip conveyor

Condition: excellent (used), Year of construction: 2005, operating hours: 6,820 h, functionality: fully functional, turning length: 1,075 mm, turning diameter: 620 mm, spindle bore: 110 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,075 mm, rotational speed (min.): 3,000 rpm, total height: 2,780 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 8,600 kg, CNC Lathe with c-axis Okuma - LB 400M MACH-ID 9780 Make: Okuma Type: LB 400M Control: OSP-E100L Year: 2005 KITAGAWA 400 mm chuck Spindle bore 110 mm Lsdpjzu Nu Rjfx Abzsag Chip conveyor Feed rate X-Axis 20M/Min Feed rate Z-Axis 25M/Min Coolant and Filtration system Max. turning Ø: 620mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 110mm Speedrange: 3500Rpm Spindle power: 45kW ATC / revolver: 12 Speed live tools:3000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 6820H Pinole taper: 5Mk Length: 5800mm Width: 2100mm Height: 2780mm Weight: 8600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, all stainless steel PLC control variable speed 2 mixing directions pneumatic lid and discharge valve 4 kW inspection gantry Ljdpezx Uxpofx Abzeag safety lid CE-approved overall dimensions (l x w x h) : 1.750 x 950 x 1.900 mm infeed height : ± 1.730 mm Easy clean

Year of construction: 2011, condition: ready for operation (used), Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible. Lsdpfxjzrzpnj Abzeag

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Lajdpoxy E Siofx Abzjg Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: new, Bernardo Planer and Thicknesser ADM 300 – 400 V/ 3.0 kW Technical Specifications Planer Planning width 305 mm Table length 1510 mm Table height 915 mm Cutterhead speed 5500 rpm Number of cutter knives 4 pcs Cutterhead diameter 78 mm Fence 1105 x 155 mm Lasdped N S U Tsfx Abzsg Fence can be swivelled from 90° to 45° Max. chip removal 3 mm Thicknesser Table length 585 mm Planning width 300 mm Minimum/maximum thickness 3 - 220 mm Max. chip removal 3 mm Feed rate 6.6 m/min Dust extraction connection Ø 100 mm Motor output S1 100% 3.0 kW (4.0 hp) Motor input S6 40% 4.2 kW (5.7 hp) Voltage 400 V Machine dimensions (L x W x H) 1700 x 790 x 1080 mm Weight approx. 280 kg Features • Foldable planer table for quick switching to thicknessing • Integrated foldable chip ejection hood - connection diameter 100 mm • Both planer tables with fine adjustment and noise-reducing table lips • Maintenance-free 4-knife cutterhead with cutter knives in HSS-18% quality • Helically toothed infeed roller for safe and even workpiece feed • Precise thicknessing thanks to thickness table with central column guidance and support • Laterally guided fence, so the machine can be placed directly against the wall • As standard, with cutter knife setting gauge for optimal adjustment of the cutter knives • Powerful drive motor with high power reserves Scope of delivery • Cutter knives in HSS quality • Cutter knife setting gauge • Integrated chassis • Push stick