Used Raskin 125 Nia 111.163.0 for sale (4,983)

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Hnjdpfx Agjflt Ebsmsn Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length Hnjdjy Iydlspfx Agmsn 3050 mm Frame gap 2550 mm Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Installation height 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Control system DA58

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Hnjdoy Iwy Dspfx Agmjn Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: good (used), functionality: fully functional, Year of construction: 2020, Machine is in good working condition. Hnodpfxsy Dfpfj Agmsn

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm table surface area 1.000 x 1.250 mm w-travel 550 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Hnedpfx Agswdta Esmsn Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 1999, This Busch SWH 125, manufactured in 1999, is a robust and reliable stacking unit currently located in Germany and actively in use within a printshop environment. With a solid build and dimensions of 800 x 1200 mm, it offers dependable performance for industrial stacking operations. The unit is in good condition, showing no signs of damage, and is designed to accommodate a wide range of stacking needs. It features a generous platform width of 1250 mm, allowing for efficient handling of various materials. The stacking height is adjustable, with a maximum of 1350 mm and a minimum of 650 mm, providing flexibility for different production requirements. This machine, bearing serial number 409/851, reflects Busch???s commitment to engineering excellence and durability. It remains a practical choice for operations seeking consistent stacking performance in a professional setting. Hjdpoxpw Etefx Agmjnn Format: 800 x 1200 mm Equipment: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Hnodpjy Avyxefx Agmen Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: used, We are offering used crossbeams for sale. TECHNICAL DATA Clear span: 3,600 mm Box section: 125 x 50 mm – Load capacity per pair of beams: 3,700 kg Box section: 130 x 50 mm – Load capacity per pair of beams: 3,800 kg Colour: Narcissus yellow Condition: Used PRICING €25.00 net per unit €29.75 gross per unit TIERED PRICING per unit – Stock: 2,000 units 1 – 50 units: €25.00 net 51 – 100 units: €24.00 net 101 – 250 units: €23.00 net From 251 units: €22.00 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailor-made quotation. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. Hedjy H D Ekspfx Agmsnn PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. Prices are per unit/net price unless otherwise specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and craft businesses. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us if you have any questions. Four wins – The building blocks of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Hodpfx Ajxd Sz Eegmsnn Clamping force: 125 tons Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: ready for operation (used), Year of construction: 1999, CNC Control: 3D Heidenhain Millplus 5 axes Travel X-axis (mm): 1250 Travel Y-axis (mm): 880 Travel Z-axis (mm): 800 C-axis indexing degrees: 360º (0.001) Hnedpfeywfk Aox Agmon Feed rate (m/min): 40 Rapid traverse (m/min): 40 Max. spindle speed (rpm): 15,000 Spindle drive power (kW): 15/10 (40%ED/cont) Cooling Tank volume (liters): 600 Tool system Tool holder: SK 50 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Rinsing gun RENISHAW Precision package Internal cooling 40 bar Paper band filter Machine operating hours: Hours under power: 70,059 Spindle operating hours: 27,255 Total power requirement (kVA): 55 Weight: 12,500 kg

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Hnodpsgy Hzpofx Agmjn Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: used, Rotor diameter: 700 mm Hedpoyr Twxofx Agmonn Rotor width: 1250 mm Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section approx. 700 x 1250 mm Drive motor: 75 kW

Condition: good (used), Holac AU125 dicer, direct from meat factory. Good condition. Hsdjqv Ezkspfx Agmsnn

Condition: ready for operation (used), Year of construction: 2002, operating hours: 16,729 h, CNC Control: 3D Heidenhain Millplus 5 axes Travel X-axis (mm): 1250 Travel Y-axis (mm): 880 Travel Z-axis (mm): 800 Hnsdpfx Asy Hx Hcogmen C-axis indexing (degrees): 360° (0.001° increment) Feed rate (m/min): 40 Rapid traverse (m/min): 40 Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 15/10 (40% duty cycle/continuous) Cooling Tank capacity (liters): 600 Tool system Tool holder: SK 50 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Rinsing gun RENISHAW Accuracy package Internal cooling 40 bar Paper band filter Total power consumption (kVA): 55 Weight: 13,000 kg

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube Hodpfx Agsy Hnucjmenn - Machine mounts - Complete documentation including original brochure

Year of construction: 2006, condition: used, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Hjdjy Hf Itepfx Agmenn Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Year of construction: 1965, condition: used, Press brake Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm Hodeillxyopfx Agmonn pressure 125 t weight 9150 kg

Condition: new, Year of construction: 2020, functionality: unexamined, overall weight: 810 kg, volume flow: 359 m³/h, pressure (min.): 19 bar, pressure (max.): 28 bar, protection type (IP code): IP54, Equipment: type plate available, Brand: Bitzer Model: CSH 8561-125 Year of manufacture: Unused Serial number: 16260164 Voltage: 400 V Frequency (Hz): 50 RPM: 2900 Amperes (A): 215 Dimensions LxWxH (mm): 1630 x 760 x 900 Weight (kg) approx.: 810 Quantity in stock: 1 Hnjdpjyzmu Rsfx Agmjn Capacity (m³/h): 359 Max. working pressure (bar): LP 19 / HP 28 Made in: EC Comments: Unused compact type screw compressor, suitable for multiple refrigerant types R134a / R404, R407.

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Hedpfx Agsy E Etyemonn We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Hnsdpfxoy Exc Ie Agmon Vertical cylinder: 18 MACHINE DETAILS Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Hnjdpfsy Exagox Agmjn TECHNICAL DETAILS Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 1,225 kN, ejector stroke: 130 mm, opening stroke: 600 mm, plate length: 740 mm, plate width: 700 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 tons Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 130 mm Max. platen distance: 950 mm Screw diameter: 35 mm Screw diameter: 30 mm Injection volume: 158 cm³ Injection volume: 98 cm³ Min. mould height: 350 mm MACHINE DETAILS Hnsdjy Ewg Eepfx Agmsn Enlarged clamping platen: 740 mm x 700 mm EQUIPMENT Rotary table Note: When purchasing multiple items from the same location (see offers below), you will benefit from the most favorable disassembly and loading costs.

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 Hnsdpfox Szm Aex Agmon The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 Hnodjvp Shgjpfx Agmjn main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 Hedowva Iaepfx Agmjnn 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)