Used Qiagen Qiasymphony Sp Fully-Automated Dna Rna Purification for sale (32,449)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Tedpfx Acohg Rcxsneb Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, machine/vehicle number: 14889, Ösmaschine / Eyeletting machine Hang 103 SP SN. 14889Serial-No. 14899 Fußbetrieb / Foot operation Online-Video-Inspection by Skype-Video Tjdpfeh Axz Nex Acnsb We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Frequency converter Manufacturer: Danfoss Typ: VLT Automation Drive - FC-302P1K5T5E20H1 Max. Power: 1,5 kW Input: 3x380-500V, 50/60 HZ, 3.7/3.1 A Tsdpfshqhx Tjx Acneb Output: 0-100 HZ, 4.1/3.4 A

Condition: used, PLC control Tsdjb S Humjpfx Acnsb -Type: Simatic S7 6ES7 138-4CB11-0AB0 -Number: 12x available -Price per piece -Weight: 0.1kg

Condition: used, PLC control -Type: Simatic S5 6ES5430-4UA14 -Simatic DP, decentralized peripheral DP/DP-coupler Coupling module for connecting two PROFIBUS-DP networks, redundant power pricing -Number: 21x available -Price: per package Tsdpfx Acjb Nfdfeneb -Weight: 0.3 kg

Condition: reconditioned (used), functionality: fully functional, used spiral mixer Kemper SP 150 AL, with 1 movable stainless steel bowl, 1 more bowl available, overhauled, for 150 kg flour, 2 timers (overhauled), stainless steel spiral, newly painted, new electrics, new bearings, new V-belts, no. 6726916/610047, 400 V, 50 A, 50 Hz Todpfx Aeukgumocneb

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, total length: 5,900 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1992, = Further Options and Accessories = - Aluminum fuel tank - Leaf suspension - Air suspension - Sleeper cab - Sun visor = Remarks = Volvo F16.500 Globetrotter 4x2 – Fully renovated – Volvo Demo colors – New paint – Perfect condition Year: 28-02-1992 Mileage: 782,543 km VIN: YV2H3A6A8NA369308 Registration: 76-BTB-7 Volvo in perfect condition New paint – Volvo Demo colors Interior like new Air suspension 3.60 m wheelbase Telma retarder Cruise control Double bed Electric windows Air horn Additional lights Visit our website for all photos and details: Tedpfxeuxyc Io Acnjb = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 16,115 cc Transmission: Volvo manual gearbox Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf spring Rear axle: Tire size: 295/80R22.5; Dual-mounted; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Weights Unladen weight: 8,000 kg Payload: 11,000 kg Gross vehicle weight: 19,000 kg Functional Body manufacturer: Volvo Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Identification License plate: 76-BTB-7

Condition: used, functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, tank capacity: 180 l, input frequency: 50 Hz, empty load weight: 1,000 kg, overall weight: 1,000 kg, type of input current: three-phase, power: 8 kW (10.88 HP), electrical fuse: 32 A, Spiral mixer, dough kneading machine Diosna model: SP 120 A with extendable bowl carriage Kneading machine for a maximum of 120 kg of dough with timer and 2 speeds Connection 400V, 16A CEE plug Used machine Many more spiral mixers in stock! Tsdpfx Acerhfq Djnob

Condition: as good as new (ex-display), Year of construction: 2017, UNION CM10 SP TWIN Double cabin: No. 1 washing cabin, No. 2 cooling cabin equipped with No. 3 pneumatic doors. "Pass-through" type the baskets are loaded from one side and unloaded in the opposite side performing the complete cycle. The parts are loaded with a mobile trolley on the side of the washing cabin and transit inside the cooling cabin and then unloaded from the side of the cooling cabin. - Advancement between booths automatically via sideshift. - Basket rotation with safety clutch. - Possibility of loading a basket ø1060mm useful inside 980 mm. - Internal useful height 1000 mm. / Max. load capacity. 500 kg. - Washing tank 280 lt. with level restoration and stainless steel axial washing pump. - Dosatron soap dispenser on wash tank 3-10%. - Rinsing tank 250 lt. with level restoration and axial washing pump in stainless steel. - Plant constructed of AISI 304 except for safety ground tank, external structures and external paneling (painted FE). - Safety ground tank at the base of the plant. - Total thermal insulation. - No. 2 External trolleys with drip tank + No. 2 Baskets ø1060 internal useful 980mm. - Automatic doors with safety barriers. - N°3 Bag filters (N°2 on washing 25 micron - N°1 on rinsing 10 micron). - "Union DC60" oil separator. - High-pressure blower, side air blade positioned. - Drying fan with electric heating elements. - Vapor aspirator - Emptying pump. - No. 2 Cooling Fans. (Water Chiller NOT included in the quotation). Tsdpfx Asr Duq Ujcnjb - PLC SIEMENS S7-1200 with TOUCH PANEL KTP 700 BASIC + Gate Manager for remote assistance.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, total length: 1,175 mm, total width: 800 mm, tank capacity: 180 l, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, power: 8 kW (10.88 HP), electrical fuse: 32 A, Spiral mixer Diosna TOP model: SP 120 D 2 timers, 2 speeds Stainless steel bowl and spiral Robust technology Dimensions: 800 x 1270 mm (W x D) DGUV V3 certified – only available from us Connection: 400 V, 32A-CEE plug Used machine, cleaned & SAB inspected Optional: Todpsu A Hhfjfx Acnjb Maintenance contract Service package Delivery service Instruction and commissioning Leasing & rental service We have a large selection of spiral mixers in stock!

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes Tsdpeu H R Iwjfx Acnob - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW CEFLA Cooling Zone: AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Note: The paint booth visible in the video is not included in the scope of delivery or sale. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Pass-through working height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Maximum air knife outlet speed: 32.5 m/s Fan power (supply/recirculation): 3 kW Fan power (exhaust): 1.5 kW Air throughput (supply/recirculation fan): 6,000 m³/h Air throughput (exhaust fan): 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT Todpfx Aeyg Eynjcnjb TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Year of construction: 2026, condition: new, functionality: fully functional, • For pallets up to a maximum height of 2200 • Mechanical brake for easy film tension adjustment • 6 freely programmable programs (program memory) • Electrically controlled steering • Maintenance free battery • Pallet dimensions: o Length: min 700mm / max ---- o Width: min 700mm / max ---- o Height: min 500 mm / max 2200 Tedpjimr Elofx Acnob • Battery for electric drive 24 V • Built-in rapid battery charger 240 V • approx. 200 "Euro" type • Acoustic warning signal and warning light during operation • Adjusting the stretch parameters on the operator panel o Speed of the film carriage o Adjustment of foot and head wraps o Cross windings / one-way winding spiral Warranty: 12 months (single-shift operation),

Condition: new, * IMMEDIATELY AVAILABLE * Including side door / lowering platform / manual hydraulics / braked TECHNICAL DATA • Brand: Vezeko • Model: Husky FB K • Vehicle type: Drop-bed trailer • Vehicle condition: New vehicle • First registration: without first registration • Technical inspection (TÜV): 2 years from initial registration • Internal dimensions (LxWxH): 344 x 157 x 200 cm • External dimensions (LxWxH): 493 x 228 x 255 cm • Load height (from ground): 44 cm • Permissible total weight: 2,700 kg • Unladen weight: 871 kg • Payload: 1,829 kg • Chassis: Low-loader (wheels beside body) • Tyres: 195/50R13C • Suspension: AL-KO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • 15 mm multiplex birch floor, anti-slip coated – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Multiple crossmembers for high point load capacity • Superstructure made of extremely solid welded steel panel sandwich, insulated, 30 mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of 25 mm GRP sandwich • Two-winged rear door with lockable stainless steel bar lock • Doors with special sealing profiles of hard/soft plastic • Side door, standard right front, approx. 70 cm, with triple-bolt security lock, lockable from inside and outside • Rear frame made from hot-dip galvanized steel, solidly welded Tsdpfx Asyivbbecneb • Loading platform hydraulically lowerable • Mechanical safety lock for pivot axis during travel • Rear foldable stainless drive-on ramp • Additional longitudinal reinforcements fully welded • Front storage box • 10 lashing eyes within V-loading rail, rubber-coated, pull force (750 DaN/kg) • Rear number plate holder • AL-KO overrun device and parking brake • AL-KO coupling head • Extra robust V-drawbar reinforced • Reversing automatic system • 13-pin plug • Reversing light • High-capacity safety lighting • Integrated rear fog light • Rear lane marker lights in LED • Rear frame lights recessed • Centrally mounted jockey wheel with clamp Optional accessories available – feel free to inquire: • Electric pump instead of manual pump • 100 km/h approval with shock absorbers • Lashing rails on the wall • Anti-theft device • Spare wheel • Additional lashing eyes • Reversing light • Lashing straps • And much more New vehicle with warranty and technical inspection (TÜV). ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance, or temporary registration plates (Germany) can be provided - Export registration with customs clearance possible Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! For over 30 years: Official dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands - Errors, omissions, and prior sale excepted -

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 1260x490 mm, with an impressive spindle speed of up to 36,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. Tsdpfxjyizugj Acnob • Table size: 1260x490 mm Additional equipment • incl. EROWA Robot Multi automation • Item 20 (Article No. 3391-176): 1 Pc. Continuous Path Control Heidenhain iTNC 530M (Standard Base Version) Item 30 (Article No. 3360-181): 1 Pc. Software Option 1 for iTNC 530M (Rotary table machining in mm/min, programming of contours on the cylinder surface, tilting of the working plane, including circular interpolation in 3 axes) Item 40 (Article No. 3360-182): 1 Pc. Software Option 2 for iTNC 530M (3D machining: smooth movement, 3D tool compensation, TCPM, 5-axis linear interpolation, splines, block processing time 0.5 ms) Item 50 (Article No. 3391-211): 1 Pc. Standard Clamping System Item 60 (Article No. 3390-220): 1 Pc. Machine Table 1260x490 with 9 T-slots 12H8, 50 mm distance Item 70 (Article No. 3391-240): 1 Pc. Tool Changing System with 28 magazine slots HSK-E50 Item 80 (Article No. 3390-270): 1 Pc. Side Enclosure of the machining area made of stainless sheet metal, with wide-opening sliding doors at the front and polycarbonate panes. Incl. 2 anti-stroboscopic lights. Right side door manual or optional automatic opening. Item 90 (Article No. 3390-272): 1 Pc. Right Side Door with window, lockable Item 100 (Article No. 3390-275): 1 Pc. Automatic Enclosure Door left to P90 for workpiece loading. Incl. 2 pneumatic cylinders, guides, control valve and control circuit for CNC control. Item 110 (Article No. 3390-288): 1 Pc. Full Enclosure of the machining area towards top (32/28 tools), with lockable recess for loading crane. Item 120 (Article No. 3360-506): 1 Pc. Extended Energy Saving Function via electronic timer. Automatic standby switching of machine drives after completion of NC programs and restart of the plant. Item 130 (Article No. 3360-842): 1 Pc. Oil Mist Extraction System for machining area Item 140 (Article No. 3390-851): 1 Pc. Standard Coolant System 3 bar / 30 l/min with 2 submersible pumps, chip drawer, additional fine chip filter insert and stretch mesh filter. Coolant tank 240 l capacity. Item 150 (Article No. 5130-101 Special): 1 Pc. Preparation for Minimal Quantity Lubrication system. Hoses routed through machine head to spindle. Switchable via M-functions. Item 160 (Article No. 3363-872): 1 Pc. 3D Touch Probe System Renishaw MP 40 incl. spindle insert HSK E50, touch stylus Ø 6 mm, signal transmission wireless via infrared system. Self-calibrating with 360° radiation. Item 170 (Article No. 3390-877): 1 Pc. Laser System NT for high-precision measurement and monitoring of tools D 0.15 to 63 mm. Cycle-supported measurement of diameter and length as well as contour stability. Includes automatic alignment and checking of CNC tool table. Item 180 (Article No. 3360-918): 1 Pc. FEHLMANN HSC Settings (Cycle 327) for dynamic optimization of digital axis drives. Item 190 (Article No. 4875-114): 1 Pc. Automatic CNC Indexing and Swiveling Unit ATS 160 CNC-SDKD--ITSPC in digital execution with Erowa quick-clamp chuck ITS Power Chuck. Center height: 160 mm. Swivel range: +18° to -5°. Max. workpiece diameter: 300 mm. Max. workpiece weight: 50 kg.

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 140 To./h fully mobile asphalt mixing plant - year: Neu - capacity: 140 To./h - cold feeder: 3x 6m³ - dryer drum - drag elevator to load asphalt onto the trucks - dust collector Dry system with Nomex sleeves filters ; filter space 370m² - mixer Body in carbon steel plate structure, with heating cabinet by thermal oil, internal coating system anti-wear, sealing caps and Todpfx Acoyi Hmbonsb inspection - control room with fully automatic software and manual mixing desktop - Mobile Tank 60.000L (40.000L bitumen / 20.000L fuel) available for extra price

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7086-4CC71-1RG0 -Voltage: 276 V -Speed: 2000 / max: 6000 rpm -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 60 mm -Number: 2x geared motors available Price: per piece -Dimensions: 500/155/H200 mm -Weight: 32 kg/pc. Todpfx Acjxr Uczonsb

Condition: new, Year of construction: 2022, functionality: fully functional, pressing force: 4 t, filling opening width: 715 mm, filling opening length: 550 mm, bale length: 510 mm, bale width: 710 mm, bale height: 600 mm, bale weight: 50 kg, total width: 830 mm, total height: 2,220 mm, total length: 785 mm, type of input current: AC, input voltage: 230 V, noise level: 70 dB, transport height: 2,220 mm, oil tank capacity: 4 l, power: 1.5 kW (2.04 HP), empty load weight: 375 kg, transport width: 835 mm, transport length: 790 mm, input frequency: 50 Hz, Brand new, unused vertical single chamber baler, manufactured in 2022. Perfect for small businesses, baling cardboard or soft plastic (film). Simple connection with a plug to a 220V power supply. We can offer delivery for an additional fee or by arrangement. More information by whatsapp or phone. Tjdpfx Asvy Drxecnjb

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 07/2027, year of last overhaul: 2026, total length: 1,350 mm, total width: 800 mm, tank capacity: 180 l, input frequency: 50 Hz, type of input current: three-phase, electrical fuse: 32 A, Spiral Mixer Diosna Model: SP 120 F /T Dough temperature display Mobile kneading machine 2 timers, 2 speeds via program control Stainless steel bowl and spiral Flour dust cover Dimensions: 800 x 1350 mm (W x D) Connection: 400 V, 32A-CEE plug Refurbished used machine, SAB tested With warranty We offer the largest selection of spiral mixers available for immediate delivery! Tjdpfx Acjv At I Usneb

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Tedow H Naajpfx Acnjb Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, year of last overhaul: 2026, total width: 1,200 mm, total height: 1,300 mm, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 63 A, TOP Spiral Mixer Kemper SP 150 AL with 2 mixing bowls Mixer for a maximum of 250 kg of dough Dough machine with cover with 2 timer switches and 2 speeds Connection 400V, 63A-CEE plug Dimensions: 1200 x 1550 x 1300/2000 mm, WxDxH Used machine, refurbished with warranty + service package Tjdpfxow S Snco Acnsb Quality from a specialist company! Benefit from over 35 years of experience! Option: Delivery service additional mixing bowls maintenance contract Experience our world of bakery machines!

Condition: used, empty load weight: 7,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2008, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 91 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: white, Equipment: ABS, Disc brake EBS Payload 27,950 kg Tedpfxexu Iito Acnsb Air-lift suspension Portal doors SAF axles Lifting and lowering device VIN No. 111231 Subject to errors and omissions

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Max. frame dimensions: 2200 x 4000 mm Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Inkjet printer Domino A520i and bending tools included. Tedpfxoxyk R Re Acnsb Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. In good technical condition. Available: NOW

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 Tsdpfx Acsx D Nxzjnsb • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: new, Rexroth CMP60.2-SP-304-FN-NNNN-NW control unit MNR: R911170645-GC1 SN, unused in opened original packaging, 100% functional, scope of delivery as per photos. Tjdpfx Asx Dw Scscnjb