Used Pyrolysis Furnace for sale (730)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Dcedpfx Agjd I T Exsvoh For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) Dcsdpfx Asxfcdyogvoh N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: good (used), Gebhardt Q2M-P2B6N-PAC RD centrifugal fan 20000 m³/h Gebhardt Q2M-P2B6N-PAC RD Centrifugal fan 20000 m³/h 7,50 kW n max: 1782 t max: 250 p: 1,200 Motor Siemens UD 0705/1082878-016-1 400/690 V 50 Hz 7,5 kW 8,6 kW 60 Hz 1160/min Dimensions. Height without motor = 64 cm Height with motor = 95 cm width = 102 cm Depth = 102 cm Dedpfjicav Dsx Agvsch Weight approx. 280 kg

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace Dcodpfx Aecmr D Hegvoh max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Year of construction: 2017, condition: ready for operation (used), Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Dsdpfx Agewykz Sevjch Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner Dcjdpfxsxcybks Agveh - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. These are Internal - bed sizes Gas fired Eurotherm Control 4102. Dedpfjvitnhex Agvjch Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS Dcodpfxexur Ndj Agveh External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: defective spare-parts repository (used), Stainless steel housing for a vacuum furnace with a heating chamber made of molybdenum. Chamber size: 600 mm x 600 mm x 900 mm Internal diameter of the working chamber: 1,000 mm External diameter of the working chamber: 1,280 mm Dcodpfx Aevrh Iusgveh External diameter of the vessel (without flange): 1,450 mm Height without wooden pallet: 1,900 mm Height with wooden pallet: 2,100 mm Width: 1,900 mm Length: 1,900 mm Weight with wooden pallet: 1,750 kg Inspection by appointment is possible at any time.

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Max. operating temperature: 1120°C Normal operating temperature: 1050°C Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Heating Chamber Width: 500mm Dsdpfxewku N Us Agvech Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Frequency: 50Hz You are welcome to visit us by appointment.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Dedsxwn R Nspfx Agvsch Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: used, Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, the following is included: - Hardening furnace (vacuum oil quenching furnace) Dedpfxewlvhhe Agvech - Control cabinet for hardening furnace - Internal water tank with pump units and control box - Control box for water cooling - Internal nitrogen pressure vessel - External platform for cooling unit + connection points for nitrogen batteries (nitrogen battery containers not included, must be rented) - 7 hardening baskets - Red transport and loading trolley - Parts washing tank for complete baskets with compressed air and drip tray -> System has approx. 6,000 operating hours -> The pictures are up-to-date, only the date on the images is not correct

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Dodpfx Ajxpuahjgvsch Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Dsdoxdantepfx Agvjch

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: Dedpfxelxnlfo Agvech - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Dcedpfx Agowxxgaoveh You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN Dsdpom E Tvhofx Agvech MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Year of construction: 1990, operating hours: 16,400 h, condition: good (used), AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Dcedjnzhx Hopfx Agvsh Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Dsdpfx Agou A Tf Devsch Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Condition: ready for operation (used), Heraeus MR 260 annealing furnace Internal dimensions: 260mm x 500mm x 160mm ( W x D x H ) Space requirement: 1100mm x 700mm x 1560mm ( L x W x H ) Weight: 150 kg Nominal temperature : 1000°C You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved. Dsdpfsrm R Eysx Agvjch

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Complete aluminum ingot casting and stacking line manufactured in 2022 by GHI Smart Furnaces. Inclined casting machine for the production of 10 kg commercial aluminum ingots, with a nominal capacity of 5 t/h. Dcsdpfx Aozbty Sogvsh The line includes an automatic pouring system, water spray cooling system, demolding system, cooling and ingot positioning conveyor belt, 3-axis stacking robot, and a walking beam hydraulic conveyor for package handling. • Application: casting and solidification of metal ingots • Status: available for immediate sale • Current condition: in operation The equipment has been operated under normal industrial conditions and has been maintained in accordance with the manufacturer's recommendations. The machine is suitable for the production of aluminum ingots and can be integrated into existing melting and casting operations. Its robust design ensures reliable operation and consistent casting quality.

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 - KF Arc Furnace_AC EAF 8 ton, 4 MW - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t Dodpovampgsfx Agvjch - Power transformer 4 MW Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Year of construction: 2020, condition: new, Kreuzmayr fruit drying cabinet OTS 4 Djdpfx Aoygm Iogvjch drying surface 4m³ stainless-steel construction

Year of construction: 1987, condition: used, 13-Stand Rebar / Bar Mill - 100.000 Ton/year New: Shutdown: 2003 Manufacturer: Configuration: 1987, upgrades in the late 1990's, early 2000's Billet: Products: Rebar: Rounds: Square: Hex: Flats: Angles: Controls: Drives: Schloemann, Hille Engineering, ABB, Ajax Semi-continuous, Reversing Roughing Stand plus 12 Continuous Finishing Mill 4" - 5" (102 - 127 mm) .5" - 1.2" (12.7 - 30 mm) .5" - 2.5" (12.7 - 63.5 mm) .625" - 2" (15.9 - 50.8 mm) .625" - 1.8" (15.9 - 45.7 mm) .25" x 1.5" - 1" x 4" (6.4 x 38.1 - 25.4 x 102 mm) 1" x 1" x .125" - 3" x 3" x .375" (25.4 x 25.4 x 9.5 - 76.2 x 76.2 x 9.5 mm) ABB master reference speed control system for tension free rolling Solid State ABB. Most motors and drives were replaced in 2000. Stand Number Type Roll Diameter Roll Width Motor 1 Horizontal 14.75" 20" 500 HP 2 Horizontal 14.75" 20" 500 HP 3 Horizontal 15.25" 20" 500 HP 4 Vertical 15.25" 20" 350 HP 5 Horizontal 15.25" 20" 500 HP 6 H-V Convertible 13.78" 22" 500 HP 7 H-V Convertible 13.78" 22" 500 HP 8 H-V Convertible 13.78" 22" 500 HP 9 H-V Convertible 13.78" 22" 500 HP 10 H-V Convertible 13.78" 22" 500 HP 11 H-V Convertible 13.78" 22" 500 HP 12 H-V Convertible 13.78" 22" 500 HP Main Components: 1. Billet Reheating Furnace: Ajax 4 zone continuous Induction Furnace: Zone 1: 4,000 kW, 10 coils Zone 2: 3,000 kW, 12 coils Zone 3: 3,000 kW, 12 coils Zone 4: 1,000 kW, 10 coils 2. Schloemann 2 Hi Reversing Roughing Mill: Roll diameter: 26" (660 mm) Roll width: 88.5" (2,248 mm) Motor: 2,000 HP Dsdpfoyx Exiex Agvjch Entry and exit Roller Conveyors 3. 12-Stand Hille Engineering (UK) Continuous Mill: (3) Flying Crop and Dividing Shears Vertical Loopers in the Finishing Train4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" 4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" to 2.25") 6. 120' Walking Beam Cooling Bed 7. CMI Product Saw driven by 300 HP DC Motor 8. Finishing Stand Setup Area (stands 6 to 12) 9. Spare rolls, chocks, bearing and other spares The Mills is still installed. The condition of the equipment is very goo

Year of construction: 2009, condition: used, Complete Cermaic production factory for sale ! Factory consists : 1 GLAZING ROBOT GAIOTTO GA2000, MODEL RAG-GA2000 AXES in 2007 2 STOVE TURBO COMPACT MC 16, MODEL MC16 SAFF FORNI, in 2006 3 STOVE TURBO COMPACT 12F, MODEL MC12, SAFF FORNI, in 2006 4 DRYER JULIUS LIPPERT, MODEL KTRO, in 1972 5 PRESS GEBER NETZCH VPPS, in 1972 6 BATTERY MOLDING BLOWTHERM, MODEL IH/AR 125, in 2010 7 PRESS PALAZZETTI - VICENTINI, MODEL HPO 1400 in 2006 8 CHAMBER FURNACE SAFF - TURBO COMPACT 25M3, MODEL 25M3 SAFF FORNI, in 2007 9 GAIOTTO GA 900 GLAZING ROBOT, MODEL GA 900 EV, in 200 10 BRAGANTI DRYER 11 MODEL MCZ FOR THE PRES 1 DRYER SPANISH SACMI, MODELSACMI RRL 90 in 1999 2 AUTOMATIC GLAZING LINE (EN.CO), in 2013 3 SACMI HYDRAULIC PRESS, MODEL PH 557, in 1992 4 RULI FURNACE KEMAC EK 17, MODEL EK 17, in 1999 5 CHAMBER FURNACE SAFF FORNI TURBOCOMPACT 16MC, in1996 6 CUTTING TABLE FORNATON, in2012 7 BRICK TRANSPORT TROLLEY 8 CHAMBER FURNACE TURBO METANO 12M3, MODEL TURBO, 2006 9 HOLZKRAFT KSO 1500 WOOD GRINDER, MODEL KSO 1500, in1993 10 BRA CUTTER 1 PRODUCTION LINE FOR FIRE MAT.TECHNOLOGY OF DRY PRESSING in 1980 2 DRY PRESSING PRESS LAEIS HPF 400, MODEL HPF 400, 3 FURNACE REIDHAMMER HWU 10, MODEL HWU 10: 4 MIXER FOR MIXTURE PREPARATION 5 MIXTURE CONVEYOR TO PRESS 6 HYDRAULIC LIFT PLATFORM Djdszbtvaspfx Agvoch