Used Pullmax Beveller for sale (518)

Condition: new, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Blodpfxoywx Uze Ak Ejg

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Blodjywh Epopfx Ak Eeg Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate settings Fully automatic edge magazine for coil and strip material Gluing station: Glue pellets + PUR application Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for coil and strip material up to 3 mm (6 mm) edge thickness Adjustable bevel from 0-10° on the trimming saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraper unit for bevels and radii Flat scraper unit - finishing Bljdpsywh A Iefx Ak Esg Machine is INSPECTED and in TOP CONDITION from a very well-maintained workshop Available from stock in Lieboch

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. Blsdpfxsyy Rn Ss Ak Eog ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. * User-friendly design, easy access to the cutting area. Blsdpfx Akoyy Nrvs Ejg * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: new, Year of construction: 2020, Machine type K2 2.0, new machine, as new, the machine bears the CE label, automatic, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 150/1250 mm, working height 3/50 mm, working length 270/5000 mm, feed speed 25 m. per minute, motor size 5 kW, with 4 tool holders, tool mountings: ISO30, blade diameter 100 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm.. Bljdpjh I Nd Sefx Ak Eog +Machine is also bought with software for TPA codes +Licens for programming on external PC

Condition: new, Year of construction: 2021, Machine type K2 2.0, new machine, the machine bears the CE label, automatic, with CNC control, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 1250 mm, working height 50 mm, working length 6000 mm, motor size 5 kW, the machine's motors are rated at 400 volts, motor rpm 1200/2400 per min., with 4 tool holders, tool mountings: ISO30, feed speed 25 m. per minute, tool diameter max. 35 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm., air consumption: min. 7 atmospheric pressure, complete with some accessories. Blsdpfxsh Izk Uj Ak Ejg

Year of construction: 2025, operating hours: 100 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 11425, Belt edge polisher for straight edges type Amber 5+4 SX This brand new model has replaced the famous Penta offering more functions and the possibility to process small pieces with a minimum width of 4cm! Comandulli used this machine for open days and customer demonstrations and puts it up for sale now at a special price. Please contact us to learn more about the conditions. Machine configuration: Bsdpfsyycbkex Ak Ejlg - Multifunctional unit for calibrating and upper drip grooves - 5 frontal polishing heads with oscillation movement - 2 upper bevelling units - 2 lower bevelling units Pneumatic pressure rollers designed for narrow pieces from 4cm Manual frontal bar Manual lubrication Manual water valves 15" touch screen control panel Roller tables at choice

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. Bjdpoyx Uy Ajfx Ak Eslg • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Bjdpfelxzhtox Ak Eolg Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Bsdoyh A Nyepfx Ak Eolg Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request. Bljdpfsyx Svbsx Ak Ejg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Year of construction: 2010, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Blodpfxoyxq A Hj Ak Esg Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm -Protection rating: IP55 Bodpfx Aoxt Dniek Ejlg -Number: 4x geared motors available -Price: per piece -Dimensions: 490/160/H230 mm -Weight: 20.5 kg/pc.

Condition: new, Aceti edge milling machine Art.61 A stable, robust edge milling machine, for milling visible and welded edges. Chamfer adjustment by handwheel and scale. Table hardened, with clamp 500 mm long. Axial adjustment of the milling table for full utilization of ISO / DIN inserts. Suitable for all materials, including plastic, by using different inserts. Standard accessories : -Milling head completely equipped with 10 ISO inserts -Hardened axially adjustable guides -Bevel adjustment by handwheel with locking device -Angle adjustment by circular guide 15-45° - Table design with 4 rubber feet -Table design with 4 rubber feet technical data: Motor 400V 1,1 KW speed 2800 rpm milling table 500 x 100 mm milling cutter 80 mm chamfer 0 - 6 mm angle 15 - 45 weight 35 kg incl. 10 pcs. indexable inserts SPUN 1203 Bodpfxoiwxwte Ak Eolg

Condition: used, mileage: 323,295 km, power: 290 kW (394.29 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 12,970 kg, maximum load weight: 13,030 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 5,500 mm, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 9,040 mm, loading space width: 2,500 mm, loading space height: 2,098 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, tail-lift, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, large cab, 1 comfort seat, 1 bed, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, fog lights, tool box, air suspension, aluminum tank, last axle liftable, last axle hydraulically steered, lashing rails, underrun protection, mechanical ramps, side aluminum underrun guard, roof hatch, aluminum tail lift, upright, green environmental badge. Wheelbase: 5500 mm Superstructure: damaged insulated refrigerated box body with underfloor cooling unit Carrier Supra 950U & 2.5t tail lift BÄR BC 2500 S4. The vehicle has damage to the rear left of the body! Bjdjyi Hpvepfx Ak Eolg Front axle air-suspended, 8t front axle, rear axle hypoid bevel gear 440 13t, 7.5t tag axle steered/relievable/liftable, electric brake system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, additional stabilizer on rear/tag axle, front underrun protection made of aluminum, smoker’s package, comfort lower bed, residual heat utilization, hot water auxiliary heater, start-off aid, ClassicSpace, comfort central locking, driving program "economy", Mercedes PowerShift 3, pre-equipment for toll recording, LED daytime running lights, high performance engine brake, powertrain pack 2, chrome package, ESP, lane keeping assist, attention assist, Active Brake Assist. Operating hours cooling unit approx. 2327h! Equipment details without guarantee, subject to change, prior sale and errors excepted!

Condition: good (used), Year of construction: 2005, operating hours: 374 h, functionality: fully functional, machine/vehicle number: 112434, total length: 7,310 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 4,200 kg, input frequency: 50 Hz, type of input current: three-phase, working height: 80 mm, power: 20 kW (27.19 HP), pressure: 7 bar, Straight line bevelling machine for glass with 7 wheels, serviced in 2025. Minimum glass size: 40 x 40 mm. Speed: 0.5 – 4.1 m/min. Glass thickness: 3 – 20 mm. Bevel angle: 3° – 45°. Maximum bevel width: 50 mm. Power: 20 kW. Excluding water tanks and pump (connected to central system). Blodsyg Dhqopfx Ak Ejg

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 Bedpfx Asyn I U Rjk Eslg • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment Bedsyhfvlopfx Ak Ejlg • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 8,000 mm, This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information. Additional equipment Bedpfx Aoyaiyxsk Ejlg • Cutting Gases: O₂, N₂, F5, H35 / Table Ventilation: Mechanical valve with JET filtration system/ Optional Features: Oxy-fuel torch, pipe cutting unit, industrial fume extraction system Machine Benefits Technical Machine Benefits • Cutting capacity: mild steel: up to 65 mm/ stainless steel: up to 50 mm/ aluminum: up to 50 mm • Piercing capacity: mild steel: 40 mm /stainless steel: 25 mm /aluminum: 25 mm • Max. Positioning speed: 15 m/min • Positioning accuracy: ±0. 01 mm • Number of axes: 5 (with bevel cutting capability) • Control system: linux-based / software: ajancad and ajancam v7. 0

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Blodpox U U Dtefx Ak Ejg Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: new, neu ca. 6-8 Wochen ab Auftrag Polen 16980 € 326.02 € 1 66 mm 60 ° 300-800 U/min 0 - 1,2 mm/min 6 mm 6.5 kW 1179 mm 853 mm 1524 mm 320 kg portable auto-feed bevelling machine real time measurement and on-screen display double-sided bevelling variable spindle speed milling head including 8 replaceable inserts remote control panel with LCD display max. bevel width: 66 mm at 15° 52 mm at 30° 50 mm at 45° 51 mm at 60° Bjdpfxjyrhrks Ak Eslg

Condition: new, neu ca. 6-8 Wochen ab Auftrag Polen 26880 € 513.41 € 1 1 Blsdpfeyrhrdsx Ak Eog 30 mm 60 ° 500-2920 U/min 50 - 150 m/min 3 mm/min 100 mm 7.5 kW 1216 mm 1275 mm 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 1595 € 1 1 21 mm 60 ° 2740-3290 U/min 2.2 kW 21 kg portable heavy-duty machine designed for bevelling steel plates and -pipes guide rolls for easy operation Bledpeyrhq Tjfx Ak Eog automatic overload protection two milling heads with 10 square cutting inserts

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 2095 € Bjdpfsyrhq Hsx Ak Eelg 1 1 21 mm 60 ° 2820 U/min 1.1 kW 20 kg portable bevelling machine for processing plates and pipes integrated milling head with 10 square TCT inserts one universal guide plate for bevelling both plates and pipes continuous angle adjustment anti-vibration system for comfortable operations induction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm 260 - 600 mm (optional)