Used Profile Milling Machine For Corner Cuts for sale (72,183)

Condition: used, Horizontal machining center with pallet changer, STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Manufacturer's No. 77, Year of construction 1990 Travel range X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, stepless Tool holder ISO 40 Power connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and dual-arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with lateral movement as Y-axis - Coolant spray nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Rcodpfx Ajdzqmrsmyod Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Loading into a 40" OT HC container is possible. Good condition.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Rodsu Tln Nopfx Amyscd Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Rsdpev Amrysfx Amyecd Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Redpov R E Rdefx Amyscd Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Rsdpeiy Ekvefx Amyscd Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Rcjdpfx Aohik Ezemysd Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Rcjdethuzpspfx Amysd - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Rsdpfxsghtvaj Amyscd Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment Rjdpfx Ameznn Hrjyecd - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Rcedpfxexcgtgj Amyjd Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear Rcedpow A Af Isfx Amyjd - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Rsdpfxexcbl Dj Amyjcd Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Rcjdjt Ac Efopfx Amyod Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition Rcodpfxoty A Ehe Amysd

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition Redpfx Aor D T U Domyocd

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, Rjdpfx Asznn Hlomyjcd angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: good (used), Year of construction: 2000, Machine is with SK 30 20.000 rpm Parts shown by hand not come. Rjdpfxeznmqio Amyjcd

Condition: used, Year of construction: 1979, WANDERER Rcjdpfxoru A S Ao Amyed TYPE:KFV2 X: 1200mm Y: 350mm Z: 450mm MADE IN GERMANY

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Rcedpfx Amsx Sx R Ssyjd Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Equipment: CE marking, cooling unit, documentation/manual, Fiber Laser Cutting System CUT LITE PENTA, Model LME 3015 Year of manufacture: 2021, CE certified Excellent condition. Rcodpeznk Dtjfx Amyjd Cutting dimensions: 3000 x 1500 mm Laser source: IPG YLS 6000 W

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs Rcedpfxjznkkae Amyed

Condition: like new (used), Year of construction: 2015, Manufacturer: OPTIMUM Maschinen Germany GmbH Model: F 150 Machine type: 3-axis CNC machining center Serial number: 1521211505 Year of manufacture: 2015 Control: Siemens Sinumerik 828D Travel X/Y/Z axes: approx. 750 / 500 / 500 mm Tool holder: BT40 Spindle power: 12 kW Spindle power S1: 9 kW Total power: 25 kW Power supply: 400 V / 50 Hz T-slot worktable: approx. 800 × 450 mm Equipment: Integrated automatic tool changer Redpfx Aey Ia Uwjmyecd Integrated chip conveyor Machine weight: approx. 3,520 kg

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Rcsdpfxswxv Ize Amyed

Condition: like new (used), Year of construction: 2016, Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Source power: 3 kW Working area: 3000 mm × 1500 mm Laser source: Rofin FL030 fiber laser source Source serial number: 987 Source year: 2015 Additional equipment: Thermotec chiller – cooling unit for stabilizing the laser source temperature Donaldson Torit DCE DFPro-4SPK – extraction and filtration system for laser fumes Rcsdpjyhppvsfx Amyed Automatic loading/unloading table Light guard – light protection system

Condition: new, functionality: fully functional, Year of construction: 2022, Laser Welder – IPG Photonics Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, 1-phase, 50/60 Hz Power Rating: 4500 VA Manufacturing Date: March 2022 2. Control Power Supply / Main Unit – IPG Photonics Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Circuit Diagram: DOCCHSDMPSXX0225 Manufacturing Date: September 2022 3. Chiller – IPG Photonics Rcjdpfjwyb S Isx Amyod Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Manufacturing Date: February 2022 Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent Protection: 30 A / Type 1 Short Circuit Protection: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Circuit Diagram: P35-001221 Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Maximum Pressure working: 30 bar