Used Poly-Clip Clipper for sale (724)

Condition: good (used), Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture Gedpfszmbhjx Akysbu

Year of construction: 1970, condition: used, Headstock can be manually adjusted transversely: 600 mm Spindle can be manually adjusted in height on the column: 1200 mm Hydraulic automatic vertical movement: 900 mm Hydraulic automatic transverse movement: 200 mm Maximum distance between table and spindle mounting (long spindle): 600 mm Drive motor: 380 V, 2800 rpm, 5.5 kW Table diameter: 550 mm Space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t Godpfx Asb N Dgmjkyebu Hydraulic unit: 2.2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg

Condition: new, functionality: fully functional, machine/vehicle number: 12412802, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm Gjdpjq T R R Tofx Akyobu External dimensions approx. 2150 mm x 4450 mm x 2370 mm Gross vehicle weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - Aluminium box body - Polyester roof and front (aerodynamic) - Pullman V2 low-floor chassis - Floor plate: aluminium floor (anti-slip) - Door/ramp combination (aluminium) - Shock absorbers installed including 100 km/h certification - Lockable side door - Interior lighting with switch - 6 lashing rings on loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks and holders Chassis - Pullman V2 | coil spring suspension and shock absorber | V-drawbar with ball coupling | automatic heavy-duty jockey wheel Electrics - 12 volt | 13-pin connector | marker lights | fog light If you wish to purchase this trailer or have further questions about trailers, please refer to our internal flatbed trailer number "12412802".

Condition: new, Galen electrohydraulic undercrane polyp grabs are designed for efficient handling of scrap metal, industrial waste, bulk materials and recycling loads. With their built-in hydraulic system, they can operate directly under overhead cranes without requiring an external hydraulic power source. Gbsdsy Rfr Tepfx Akyou Strong body structure, powerful gripping performance and reliable operation make them ideal for scrap yards, steel plants, recycling facilities and industrial material handling applications. For detailed information please contact us

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars Gedexaavpopfx Akyjbu - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: new, TECHNIC Single-Disc Floor Scrubber/Polisher Choose the professional TECHNIC series – one purchase, many applications! The TECHNIC JH-005 model is a powerful, versatile single-disc scrubber/polisher designed for heavy-duty cleaning, deep cleaning, and polishing of various floor types (PVC, porcelain stoneware, terrazzo, concrete, linoleum, stone, and many others). TECHNICAL SPECIFICATIONS OF THE TECHNIC SCRUBBER: Model: JH-005 Manufacturer: TECHNIC Series: Professional Power supply: 1 / 230 / 50 (Ph/V/Hz) Connected load: 1100W Disc rotation speed: 154 RPM Power cord length: 12m Steel handle and control grips: Yes Machine weight: 48kg Brush/pad working diameter: 410mm Noise level: ~60dB Machine dimensions (H x L x W): 122cm x 55cm x 40cm Gbedpfjz A Trtsx Akyou TECHNIC SCRUBBER EQUIPMENT: 1 x Hard PPL brush (0.8mm) 1 x Medium PPL brush (0.5mm) 1 x Soft PPL brush (0.3mm) 1 x Pad holder with plastic drive plate 6 x Americo-type scrubbing pads (6 hardness levels) 1 x Cleaning solution tank 1 x Drain hose for the head 1 x Power cord holder 1 x User manual (Polish and English) APPLICATIONS OF THE TECHNIC JH-005 SCRUBBER The machine is ideal for use in: cleaning companies (routine maintenance and deep floor cleaning), schools, government offices, hospitals, clinics, office buildings, warehouses, production halls, workshops, hotels, guesthouses, restaurants, commercial facilities, shopping malls, shops. Thanks to interchangeable brushes and pads, a single machine allows you to: scrub and deep-clean, refresh and maintain, prepare surfaces for protective coatings. ADJUSTABLE HANDLE: The polisher features an adjustable handle, allowing the height to be precisely tailored to the operator's stature. This enables the machine to be operated in a natural, upright position, significantly reducing fatigue in the back, shoulders, and arms during extended use. An ergonomic handle setting also ensures better machine control—making it easier to maneuver near walls, in corners, or along narrow corridors. Proper handle height improves not only comfort but also steering precision, directly impacting work quality and safety. The JH-005 model stands out due to its steel handle and grip assembly; this sets it apart from many other polishers on the market, where these components are often made of plastic. The handle is the part most vulnerable to damage, as it is used to guide, lift, transport, and often lean the machine against walls. The use of steel significantly increases resistance to cracking, breakage, and deformation, thereby extending the machine's overall service life. Thanks to the handle's robust metal construction, the TECHNIC scrubber is more durable, safer to operate, and better equipped for intensive professional use.

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Gsdpfx Ajcwpkpjkyobu The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Condition: ready for operation (used), ROTER BERG - Buffing wheel / Polishing machine -Speed: 500 rpm -Wheel diameter: 200 mm -Center height: 300 mm -Motor power: 0.75 kW -Connection cable Dimensions: Gjdpsztfi Iefx Akyobu L x W x H: 0.6 x 0.5 x 0.4 meters / Weight: 95 kg Errors and omissions excepted.

Condition: as good as new (ex-display), functionality: fully functional, power: 32.36 kW (44.00 HP), fuel type: diesel, color: green, first registration: 10/2024, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2024, operating hours: 221 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, immobilizer system, navigation system, ROBERINE F302 DEMONSTRATION UNIT EQUIPPED WITH THE LATEST EXHAUST TECHNOLOGY, EXHAUST EMISSION LEVEL V WITH CABIN AND AIR CONDITIONING FIRST REGISTRATION 07/03/2024 CURRENTLY WITH 221 OPERATING HOURS AND 121 WORKING HOURS! Engine: 3-cylinder Yanmar Turbo Diesel engine Gedpfx Akjzdiu Ejyebu Exhaust emission level V 32 kW (44 hp) at 2,700 rpm Displacement 1,568 cm³ Fuel tank 45 liters – sufficient for a full day’s work Speed: Mowing: Forward 13 km/h Reverse 9 km/h Transport speed: Forward 25 km/h, optionally 20 km/h Reverse 9 km/h STANDARD EQUIPMENT: 12V socket Cruise control with memory function Command arm with LCD display: everything can be operated with one hand Weight transfer system Standard delivery with a maximum speed of 25 km/h Traction and Drive Drive: Automatic hydraulic four-wheel drive (Drive by Wire) Mowing system: Hydraulic axial piston pump for the mowing units Hydraulic tank: Capacity 55 liters with oil level sight glass Automotive driving with ECO mode: lower diesel engine speed, resulting in less noise, fuel consumption and emissions ECO mode mowing operation: lower diesel engine speed, resulting in less noise, fuel consumption and emissions Double foot pedal with greatly optimized driving characteristics Tires, Brakes and Steering Front tires: Vredestein Greentax Turf 320/55 – 12 (26x12-12 8 PR) Rear tires: Vredestein Greentax Turf 250/50 – 10 (20x10-10 6 PR) Braking system: Maintenance-free hydrostatic braking system Electric parking brake, switch on the command arm Fully hydraulic rear wheel steering including adjustable steering column Seat: Standard fully adjustable, comfortable air-suspension Grammer seat with automatic weight adjustment and control levers Displays: Dashboard warning lights: Battery, engine oil pressure, cruise control, turn signals, low fuel level in the tank, coolant and hydraulic oil temperature Displays: Fuel level indicator, hydraulic oil level sight glass, digital hour counters Weight and Dimensions: Overall length: 280 cm Height: 221 cm with cabin and air conditioning Total weight with cabin: 1,460 kg F302 Certifications: Certified according to CE Machinery Directive, protective device ISO 17101-2, certified according to ISO 21299 for ROPS, STVZO-TÜV MOWING UNITS Number of mowing units: 3 independent, hydraulically driven flail mowing units driven by axial piston motors, 3,500 rpm Mowing unit configuration: Fixed flail mowing unit with 12 flails Diameter 25 cm Equipped with a 3" support roller Mowing width: Variable 77 cm – 215 cm Height adjustment: 25 mm – 85 mm Weight transfer system: Electrically operated for improved traction through weight transfer from the mowing units to the wheels *Wiper with intermittent function *Radio pre-wiring *Variety of ventilation options *Standard with LED lighting and H7 headlights *Air conditioning *Tinted glass, sun visors and 3 mirrors *Two doors and hinged rear window Kit, reversible fan Reversing fan for optimal cleanliness of the ventilation grille in the hood Kit, deflectors Kit, complete lighting (required for STVZO) Kit, protective covers for cutting units (required when driving on roads) Bumper to protect the hood INCLUDING: Mulching blade for leaves and grass clippings Subject to changes, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made excluding any guarantee or warranty.

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Godpfx Akodzqmhsyebu Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Condition: good (used), Polishing stand Brush width: 50 mm Gbodpfx Akod Am Dljyeu Space required: W 1050 x D 540 x H 560 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine in granite configuration with 16 SG-8 spindles Maximum working width: 2,200 mm Automatic centralized lubrication system Optical slab shape detection system with 1 × 1 cm resolution Cleaning spindle Working direction: from right to left On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system. Godpfsz D Tamsx Akyebu

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Gsdpfx Aovc Amtekysbu Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: Gjdpfx Akju Ng Sqjyjbu grinding table: inclination: nein Grad voltage: 220 V machine weight approx.: 44 kg space requirements of the machine approx.: 0,3 x 0,45 x 1,1 m Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch *

Condition: excellent (used), - Deck dimensions: 1875x2340x220mm - Baking surface: 6.3 m² Gedjwxmpvspfx Akyebu - Integrated loader elevator - 3 decks, width 124 cm (6 openings, length 62 cm) - Baking depth: 170 cm - Deck height: H200 +200+250 mm - Refurbished equipment: the equipment is prepared upon ordering; pickup and return deadlines are agreed at that time (please request the price after refurbishment)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Gbsdpfjzhn Ngox Akyju Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg Godped Ih Hqefx Akyebu ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Condition: new, Year of construction: 2027, Machine for grinding, satin finishing, or polishing flat parts and profiles (finishing profiles, transition profiles, expansion joints, skirting profiles, decorative profiles, stair and terrace profiles, tile trims, edge protection profiles, renovation profiles). Gjdpfog D Rfmjx Akyjbu Benchtop polishing machine / automatic flat polishing machine for parts up to 3,000 mm in length (longer products available upon request). Equipped with one or two processing units. Base machine and control cabinet are new; processing units are used but fully refurbished with new motors. Further information available upon request.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter. Gjdpow Au A Eofx Akyjbu

Condition: used, This listing is for the Gilson PIPETMAN P2 0.2-2uL Colour code Red The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Gbsdpfx Ajxv Dqvekyeu Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the PIPETMAN L P1000L 100-1000uL Colour-code BLUE Gbodjxv Draopfx Akyeu The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: Gbsdpoy Um T Hjfx Akyou 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Full aluminum body - Aerodynamic poly bug - Aluminum floor Net: €8,310.92 / Gross: €9,890.00 Article number: C70226381820.06 Technical data: • Brand: Debon • Model: Roadster C700 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 376 x 179 x 201 cm • External dimensions (LxWxH): 499 x 233 x 237 cm • Loading height of the floor: 35 cm • Permissible total weight: 2,600 kg • Unladen weight: 705 kg • Payload: 1,895 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/65R14 • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • Aluminum side walls, double-walled and anodized • Aluminum floor, anodized • Full poly roof and front in color • Continuous internal height: approx. 187cm • Continuous internal width: approx. 181cm • Loading ramp made of aluminum, lockable with optional lock • Loading ramp as a flap/door system (can be used as a flap or door) • Side door at the front right, lockable, 127x61cm (HxW) • Tie-down eyes mounted on the floor • Interior light • Torsionally rigid chassis • Stable crossmembers, resulting in high point load capacity • PULLMAN V2 suspension, single-wheel suspension with longitudinal arm, coil spring and shock absorber, lowered with a very low center of gravity and galvanized • 100km/h with manufacturer's certificate • Reverse automatic • Knott inertia coupling and parking brake • Stable V-drawbar • Plastic fenders • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light Gsdpfx Akezy Dg Eeyobu • Automatic support wheel in the center • Body: splash-proof, not watertight _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Aluminum walls - Ramp/door combination - Aerodynamic Polybug Net price: €5,537.82 / Gross price: €6,590.00 Article number: C30213301519.21 Technical data: • Brand: Debon • Model: Roadster C300 Alu • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 303 x 150 x 197 cm • External dimensions (L x W x H): 425 x 205 x 231 cm • Loading height of the floor: 35 cm • Permissible total weight: 1,300 kg • Unladen weight: 460 kg Gedpjzy Dwkefx Akyobu • Payload: 840 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Aluminum side panels, double-walled and anodized • Wooden floor made of Finnish multiplex with screen-printed coating • Full-poly roof and front in color • Continuous internal height: approx. 184 cm • Continuous internal width: approx. 152 cm • Ramp made of aluminum, lockable with a small padlock • Ramp as a flap/door system (can be used as a flap or door) • Side door on each side, lockable • Tie-down eyes mounted on the floor • Interior light • Torsionally rigid chassis • Stable cross members, allowing for high point loads • PULLMAN2 suspension, single-wheel suspension with longitudinal link, coil spring, and shock absorber, lowered with a very low center of gravity and galvanized • 100 km/h with manufacturer's certificate • Reverse automatic • Knott overrun device and parking brake • Stable V-shaped drawbar • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Automatic support wheel in the center • Body only splash-water protected _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about any special requests! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions, and prior sale are subject to change -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/ramp combination, side door Equipment: -Low loading platform -Ramp/door combination -Aero Poly body Net: €4,697.48 / Gross: €5,590.00 Article number: C13113301516.15 Technical data: • Brand: Debon • Model: Cargo • Vehicle type: Box trailer • Vehicle condition: New • First registration: no first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 165 cm • External dimensions (LxWxH): 425 x 202 x 202 cm • Loading height of the floor: 35 cm • Permissible total weight: 1,300 kg • Tare weight: 445 kg • Payload: 855 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Full poly body in color • Continuous interior height: approx. 156 cm • Continuous interior width: approx. 152 cm • Loading ramp made of aluminum, lockable with a small padlock • Loading ramp as a flap/door system • Rear flap can be used as a ramp or door • 4 lashing eyes mounted on the floor • Wooden floor, Finnish quality, with screen-printed coating • Interior light at the rear • Rear support set • Torsionally rigid chassis • Stable cross members, allowing for high point loads • Pullman-V2 Comfort suspension, single-wheel suspension with longitudinal arms, coil spring and shock absorber, lowered with a very low center of gravity and hot-dip galvanized • 100 km/h with manufacturer's certificate • Reverse automatic • Knott inertia coupling and parking brake • Stable V-drawbar • Plastic mudguards • 13-pole connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Automatic support wheel in the middle • Body is only splash-proof. Special equipment included in the price: • Side door on the front right, lockable, 102x61cm (HxW) _____ Gbsdjzy Dk Ropfx Akyou Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -