Used Panhans 436 for sale (196)

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg Kedpfxewy Ugle Ap Ajlw

Condition: new, Year of construction: 2022, operating hours: 700 h, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: SIEMENS, spindle speed (max.): 25,000 rpm, operating hours of spindle: 700 h, coolant supply: 80 bar, spindle nose: HSK40, number of spindles: 2, number of slots in tool magazine: 40, Equipment: chip conveyor, The BA W02-22 is a horizontal, twin-spindle machining center for 4-axis machining of small non-ferrous metal workpieces. Linear and torque motors in the feed axes guarantee maximum dynamics and very short non-productive times while maintaining high workpiece accuracy. SPECIAL MACHINE FEATURES — Monobloc steel/mineral-cast composite design — Linear motors in the X, Y, and Z axes; torque motors in the rotary axes — Gantry drive in the Y-axis with electronic coupling for high positional accuracy under eccentric load — Mass-optimized machining unit (“box-in-open”) — Work spindle available with HSK A40 (25,000 rpm) — Double swivel carrier with 2 integrated rotary axes for in-cycle loading/unloading — Fanuc robot loader WORKING RANGE — LINEAR AXES Spindle distance 250 mm X-axis 200 mm Y-axis (tool change position) 350 mm (525 mm) Z-axis 300 mm WORKSPINDLE HSK A40 Speed range 1 – 25,000 rpm Power (40% duty cycle) 18 kW at 10,500 rpm Torque (40% duty cycle) 17 Nm Nominal power 14 kW at 10,500 rpm Nominal torque 13 Nm Spindle bearing diameter 50 mm Spindle lubrication Minimum-quantity oil lubrication FEED DRIVES Three-phase linear motors, type 1FN3 (Siemens), with 3 cooling circuits. STANDARD PARAMETER SET X Y Z Max. rapid traverse 80 m/min 120 m/min 120 m/min TOOL MAGAZINE Rail-guided magazine chain in pick-up system. Magazine loading at ergonomic height, tools self-locking and protected against swarf and spray water. Air-sensing cleaning on magazine side. Maximum chain speed 100 m/min. Tool change system Pick-Up Capacity 2 × 20 magazine pockets Ksdpfx Aozh Sqzjp Aolw INTEGRATED AUTOMATION WITH WORKPIECE MAGAZINE The machine is supplied with an integrated automation cell — an independent manufacturing cell with one-shift workpiece supply, ideal for small workpieces. Loading and unloading of the double swivel carrier are performed in parallel to machining time by an integrated 6-axis Fanuc LR Mate robot mounted on the ceiling, allowing more freedom of motion. The loading area is sealed against swarf and cooling lubricant, with parts lock for unprocessed and finished parts exchange in parallel with system production time. ROBOT — FANUC LR MATE 200ID The 7 kg robot performs multi-gripping, pallet movement, and handling of workpieces up to 0.7 kg with a double gripper. Internal line routing with integrated gripper control, ProfiNet communication between machine and robot. WORKPIECE MAGAZINE Workpieces are placed in pallets — up to 24 pallets stored in the elevator car, vertically cycled. Pallet size 632 × 436 mm (inlay 600 × 400 mm). Ideal for workpieces up to 100 × 100 × 50 mm. Pallet guidance in wear-free PE or hard-anodized PTFE-impregnated aluminum. Basic grid 18 mm allowing fine adjustment to workpiece height. Wear-free ball-screw drive.

Condition: like new (used), functionality: fully functional, power: 16.5 kW (22.43 HP), fuel type: diesel, color: red, overall weight: 2,400 kg, operation weight: 2,530 kg, first registration: 02/2025, Year of construction: 2025, operating hours: 320 h, machine/vehicle number: 122510936, Equipment: adjustable chassis, cabin, rubber tracks, I am selling a Takeuchi 225 mini excavator, purchased in February 2025 from Container Services. It currently has 320 hours of operation, freshly serviced. The excavator is mainly used for land leveling and excavation work by one operator. The hammer has not been used. Kljdpfxjy Ub S Dj Ap Aow Operating weight *: 2,530 kg Overall width: 1,100 mm Width with hydraulic track extension: 1,500 mm Overall height: 2,430 mm Maximum digging depth: 2,580 mm ISO 14396 power: 16.5 kW ISO 14396 power: 22.4 hp Speed: 4.2 km/h Hydraulic quick coupler Powertilt (180° bucket tilt) Buckets 300 mm, 500 mm, 700 mm and 1000 mm slope Excavator in excellent condition.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Ksdpfowra S Rox Ap Aslw Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: used, Year of construction: 2002, functionality: unexamined, inner dimension length: 865 mm, inner dimension width: 875 mm, inner dimension height: 1,980 mm, We are offering the following used Heuft 10.12,5.08 and 10.12,5.10 baking carts and peel board carts, manufactured in 2002. Manufacturer: Heuft Model: 10.12,5.08 and 10.12,5.10 Year of manufacture: 2002 Condition: used If you have any questions or require further information, please send us a message or call us. No. Cart Type Condition Width/Depth/Height 400 Peel board cart VTR 10.12,5.08 2 865 875 1980 401 Peel board cart VTR 10.12,5.08 2 865 875 1980 402 Peel board cart VTR 10.12,5.08 2 865 875 1980 403 Peel board cart VTR 10.12,5.08 2 865 875 1980 404 Peel board cart VTR 10.12,5.08 2 865 875 1980 405 Peel board cart VTR 10.12,5.08 2 865 875 1980 406 Peel board cart VTR 10.12,5.08 2 865 875 1980 407 Peel board cart VTR 10.12,5.08 2 865 875 1980 408 Peel board cart VTR 10.12,5.08 2 865 875 1980 409 Peel board cart VTR 10.12,5.08 2 865 875 1980 410 Peel board cart VTR 10.12,5.08 2 865 875 1980 411 Peel board cart VTR 10.12,5.08 2 865 875 1980 412 Peel board cart VTR 10.12,5.08 2 865 875 1980 413 Peel board cart VTR 10.12,5.08 2 865 875 1980 414 Peel board cart VTR 10.12,5.08 2 865 875 1980 415 Peel board cart VTR 10.12,5.08 2 865 875 1980 416 Peel board cart VTR 10.12,5.08 2 865 875 1980 417 Peel board cart VTR 10.12,5.08 2 865 875 1980 418 Peel board cart VTR 10.12,5.08 2 865 875 1980 419 Peel board cart VTR 10.12,5.08 2 865 875 1980 420 Peel board cart VTR 10.12,5.08 2 865 875 1980 421 Peel board cart VTR 10.12,5.08 2 865 875 1980 422 Peel board cart VTR 10.12,5.08 2 865 875 1980 423 Peel board cart VTR 10.12,5.08 2 865 875 1980 424 425 426 Baking cart VTR 10.12,5.10 2 1065 650 1930 427 Baking cart VTR 10.12,5.10 2 1065 650 1930 428 Baking cart VTR 10.12,5.10 2 1065 650 1930 429 Baking cart VTR 10.12,5.10 2 1065 650 1930 430 Baking cart VTR 10.12,5.10 2 1065 650 1930 431 Baking cart VTR 10.12,5.10 2 1065 650 1930 432 Baking cart VTR 10.12,5.10 2 1065 650 1930 433 Baking cart VTR 10.12,5.08 2 1065 650 1930 434 Baking cart VTR 10.12,5.08 2 1065 650 1930 435 Baking cart VTR 10.12,5.08 2 1065 650 1930 436 Baking cart VTR 10.12,5.08 2 1065 650 1930 437 Baking cart VTR 10.12,5.08 2 1065 650 1930 438 Baking cart VTR 10.12,5.08 2 1065 650 1930 439 Baking cart VTR 10.12,5.08 2 1065 650 1930 440 Baking cart VTR 10.12,5.08 2 1065 650 1930 441 Baking cart VTR 10.12,5.08 2 1065 650 1930 442 Baking cart VTR 10.12,5.08 2 1065 650 1930 443 Baking cart VTR 10.12,5.08 2 1065 650 1930 Klsdpfx Aezf Hiaop Asw

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Ksdpfxsw Rpzqj Ap Aelw Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), 1 used vise Manufacturer: Hilma Model: KNC 160 For horizontal clamping Clamping against fixed jaw Mechanically operated With mechanical-hydraulic force transmission Kodsw Skgdjpfx Ap Aslw With fully encapsulated spindle Jaw width: 160 mm Max. clamping force: 50 kN Max. clamping range: 436 mm Overall length: 594 mm Overall height: 115 mm

Condition: used, mileage: 436,000 km, power: 184 kW (250.17 HP), first registration: 10/2015, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro4, loading space length: 4,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, SCANIA P250 Platform 4,30 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 436 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 430 cm (L) CAPACITY: 8 000 kg Kljdpfx Apou T Amcs Ajw TOTAL WEIGHT: 19 000 kg WHEELBASE: 430 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HMF 635 K2 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 88340

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Junior Capacity: 600 kg/h Maximum heat output: 436 kW Operating pressure: 16 bar Water content: 42.9 l Test pressure: 57 bar Kodpey Tvtasfx Ap Aslw CE marking: CE 0035 Year of manufacture: 2004 Equipped with Certuss gas burner, gas control system, control cabinet, mounted on the boiler body, feedwater pump, feedwater tank, and the existing coarse and fine fittings.

Condition: used, Year of construction: 2024, operating hours: 607 h, functionality: fully functional, machine/vehicle number: 9917348, spindle speed (max.): 24,000 rpm, feed length X-axis: 4,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 300 mm, power: 8.5 kW (11.56 HP), rapid traverse X-axis: 140 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 3,600 rpm, travel distance X-axis: 4,225 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 410 mm, type of input current: three-phase, Equipment: USB port, rotational speed infinitely variable, We are offering our machining centre for sale. The equipment is in excellent condition with very low hours on the clock; it is practically new. The centre is fully equipped with everything required and comes with a comprehensive range of accessories. Reason for sale: to upgrade our own production facilities. Kodpfx Apey Su Hpe Aslw

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – after technical inspection, ready for operation Specification: • Technical condition: used, after comprehensive maintenance • Manufacturer: OMGA • Model: TR2A • Main motors: 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Max. cutting length: 312 cm • Min. cutting length: 10 cm Klsdpfx Aoy Rh Drep Aew • Max. cross-section at 90°: 80x145 mm • Max. blade diameter: 300 mm • Mitre cutting range: -45° to +45° (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports: 80 mm diameter • Weight: approx. 500 kg • Overall dimensions: 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos provided show the actual condition of the item for sale • Inspection and functional testing possible on-site • The listed price excludes VAT and transport costs Financing and transport: • Transport can be arranged via our own MDD fleet, couriers, or external carriers • Financing support available in the form of leasing or lease loans

Condition: used, Year of construction: 2022, machine/vehicle number: 04H20001A210064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 20 mm, table width: 740 mm, table length: 1,200 mm, distance table to ram: 436 mm, Equipment: CE marking, safety light barrier, We offer this used Dirinler CDS 2000 B1 eccentric press, year of manufacture 2022. Model: CDS 2000 B1 Serial number: 04H20001A210064 Year of manufacture: 2022 Nominal force: 2000 kN Distance between table and ram: 436 mm Stroke length: 20–140 mm Stroke rate: 50–70 min⁻¹ Ram adjustment (max): 97 mm Air pressure in clutch-brake unit: 5.5 bar Table dimensions: 740 × 1200 mm Voltage: 3/N/PE 400 V 50 Hz Control voltage: 24 V Ksdpfxoy Icvqj Ap Aelw Overrun distance: 150 mm If you have any questions or need further information, please contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling Ksdpfx Apsyxdwdo Ajlw • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2006, functionality: fully functional, Baler press for bundles approx. 400 kg. Manufacturer: HSM Model: HL 3521 Year of production: 2006 Condition: good Machine has undergone major service. Oil pump replaced. Oil cylinders refurbished. After agreement, can be sold and shipped immediately. Klodpoy A Hu Hofx Ap Asw

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table - Height adjustment via the sanding units - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Applications: Kljdpeyxqdkofx Ap Aow - Solid wood - Veneer - MDF/engineered wood panels - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Serial No.: LBJ3005851 Area of application: Systems, control Width: 150 mm Height: 185 mm Kljdpfx Aeyrgkrjp Aew Depth: 45 mm Weight: 436 g Condition: Good, second-hand

Condition: used, swing diameter 436 mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m It is a unit price. There are 6 pieces available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Kodpsyqvxcsfx Ap Aslw More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, planing width: 630 mm, total width: 1,100 mm, total height: 1,300 mm, overall weight: 1,200 kg, total length: 1,200 mm, planing height: 200 mm, space requirement height: 1,300 mm, space requirement length: 1,200 mm, space requirement width: 1,100 mm, No. 3249 Thickness planer Hombak D 63 Used Planing width 630 mm Planing height max. 200 mm 2-knife shaft Kickback protection Toothed infeed roller Smooth outfeed roller 2 feed speeds 9 / 18 m/min 2 height-adjustable rollers in the thicknessing table Knife setting gauge from Panhans Transport dimensions approx. 1200 x 1100 x 1300 mm LWH Weight approx. 1200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Kodpfxox Ilzvs Ap Aelw Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, empty load weight: 660 kg, maximum load weight: 1,340 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,550 mm, loading space height: 900 mm, loading space volume: 4.5 m³, color: silver, construction height: 1,620 mm, working width: 1,670 mm, E-hydraulics / leaf grid attachment / high front grid, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / leaf grid attachment / high front grid Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,000 kg - Unladen weight: 660 kg - Payload: 1,340 kg - Interior dimensions: 306 x 155 x 90 cm (L x W x H) - Overall exterior dimensions: 436 x 167 x 162 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70R13 steel rims - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Side walls: anodized aluminium double-walled, 4x foldable & removable - Side wall height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: Yes, 60cm swinging grid attachment, high grid at the front - Lashing eyes: 6 in the floor - Supports: at extra charge - Ramps: at extra charge Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - Removable front H-frame - E-hydraulics with battery - Sturdy welded steel frame - Completely hot-dip galvanized frame - Many options available hot-dip galvanized - many sturdy cross members for high point loading - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle - registration papers: COC papers Special equipment included in the price: - Original corrugated grille attachment all round, 60cm high, swinging, removable Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking bars - bar strip with rubber coating for tension belts & locking bars - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ksdpfxju Hr H Ij Ap Ajlw

Year of construction: 2022, operating hours: 575 h, condition: like new (used), Used screwcompressor immediately available (Plug and Play): RENNER RS-PRO 2-15 (13 bar) oil-injected screw compressor Operating hours: 575 h Pressure: 13 bar Rated power: 15 kW Delivery quantity: 1.92 m³ / min Sound level: 68 dB (A) Compressed air outlet: G 1 " Klsdeh Rvtrepfx Ap Asw Dimensions length x width x height: 1160 x 747 x 1270 mm Weight: 436 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: new, empty load weight: 660 kg, maximum load weight: 1,340 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,550 mm, loading space height: 300 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,020 mm, working width: 1,670 mm, E-hydraulics / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / high front grille Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,000 kg - Unladen weight: 660 kg - Payload: 1,340 kg - Interior dimensions: 306 x 155 x 30 cm (L x W x H) - Overall exterior dimensions: 436 x 167 x 102 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70R13 steel rim - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Side walls: anodized aluminium double-walled, 4x foldable & removable - Side wall height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: Yes, removable high grille at the front - Lashing eyes: 6 in the floor - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Drop sides removable - Steel plate on wooden floor in Finnish quality - H-frame removable at the front - E-hydraulics with battery - Sturdy welded steel frame - Frame compl. hot-dip galvanized - many sturdy cross beams therefore high point load - maintenance-free rubber spring axles - automatic reverse - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - charger 230V - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kledpfx Apsu Hr Hhs Asw