Used Ns Maquinas Metal Gringing & Edge Rounding Machine for sale (71,529)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Pgjdpfx Aer A Eq Rehyek Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain Pgedpfxsc Tmyge Ahyek quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll Pjdpfx Aohy Tlrohyegk suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Pedpfx Aefbr S Rehyegk • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, ALTENDORF Pgjdpfxol D Rp Eo Ahyjk Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min Podpec S Di Rofx Ahyjgk OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Pedpfx Aebahd Ejhyogk Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Podpswiwnqjfx Ahyogk Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Pgodpfx Ajlc Ewishyok Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Pgodpfx Ahouxqzuoysk Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Psdpfstt Da Dsx Ahysgk Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, workpiece height 20-90 mm Pgsdpfxjyb Sdcs Ahyjk device 1: Schleifaggragat device 2: Fräsaggregat device 3: Profilschleifaggregat Automatic edge processing machine Rehnen type KBA for the automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for joineries, furniture making and industrial woodworking. Includes replacement sanding belts and cutters. Unit 1: Sanding unit, oscillating Unit 2: Milling unit, top and bottom Unit 3: Profile sanding unit Accessories: For edges R5

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Pgedpjyu Tfhofx Ahysk Required air pressure: 6 bar Total air consumption: 20 l/min Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,304 h, functionality: fully functional, machine/vehicle number: MACC2009033, Montresor edge polishing machine LOLA 600 8 frontal grinding units 2 upper chamfers 2 lower chamfers Water groove milling unit Swiveling device 0 - 90° for water groove milling unit Speed adjustment 1200 - 4000 rpm for water groove milling unit Automatic central oil lubrication Pjdpfxsyxyvps Ahyogk Table extension console Vertical oscillation movement of the frontal motors Roller conveyors at belt infeed and outfeed, each 1500 mm Machine dimensions (without roller conveyors): length 4900 mm / depth 1850 mm / height 1935 mm Belt running direction from left to right

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality by a TRUMPF technician at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on hours: 17,731 Laser Metal Fusion Machine (Metal 3D Printer) Flexible solution for industrial additive manufacturing. The TruPrint 3000 is a universal mid-format machine (LMF / PBF / LPBF) with industrial-grade part and powder management. From now on, you benefit from even greater flexibility, quality, and productivity for your additive serial production: Productivity is nearly doubled, independent of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job ensures optimal quality for printed multi-laser parts. The latest advancements in shielding gas guidance further improve part quality and reproducibility. This is documented in parallel with the build job via Melt Pool Monitoring, allowing compliance with requirements such as those in the medical sector. Highly flexible, the TruPrint 3000 can be adapted to your specific requirements. With a build volume of 300 mm diameter and 400 mm height, it can be used across a wide variety of industries. Depending on the size and complexity of the parts, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking—all under inert gas. External unpacking further minimizes the 3D printer’s downtime via simultaneous main-time operations. Technical specifications: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-base, cobalt-chrome, copper, titanium or precious metal alloys. Current materials and parameter availability on request. Preheating (standard): up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser): 500 W Laser spot diameter: 100 - 500 μm Layer thickness (adjustable): 20 - 150 μm Pgodpfx Ahovvl I Tsyjk Scan speed (powder bed): 3 m/s Build rate: 5 - 60 cm³/h Connections and consumption: Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: Nitrogen, Argon Design: Dimensions (incl. filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (incl. powder): 4300 kg The system has been dismantled by the manufacturer, with disassembly records and function logs available. All axes are professionally secured. The system has been used with materials 1.44.04 and most recently with AlSi10Mg. Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data and listed specifications reserved!) We will be happy to answer additional questions by phone.

Condition: excellent (used), Rounding machine tool for poles/stakes production. Diameter of finished product from 40 mm to 140 mm. Machine tool was renovated. New bearings, new back side shoulders gears, renovated electrical cabinet and installed new optical sensor for pneumatic pressure, partly renovated pneumatic system (3 new cylinders). Pedpfx Aouvg Htjhyjgk

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2,2KW Minimum bending diameter: 150mm Psdpfx Ahoug Un Ejyogk Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Conical bending system Induction treated and hardened rollers Wire grooves at the end of the rollers.

Year of construction: 2026, condition: as good as new (ex-display), Spray cleaning system - Parts washing system with hinged door 1-tank version (washing), tank vol. 320 litres basket: LxW 1.100 x 1.100 mm useful height: 800 mm max. loading weight: 700 kg pump pressure of washing pump: 4,3 bar, pump power: 5,5 kW heating (electric) 20 kW; heatable up to 80°C Peded Rkmxepfx Ahyegk control: Siemens Logo inclusive - steam vapour extraction and condensation water return - automatic water refill - autom. chemical dosing (0,8 - 5,5%, adjustable) - insulation of the complete plant - plant completely made of stainless steel 1.4301 - basket rim (removable on one side) - 7-day timer for the electr. heater - E-spray pipe h= 450 mm - Preparation for oil separator (electrical and mechanical) available New unit; currently used in our technology centre for washing tests

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made from different materials without the need for constant abrasive changes. Pgodpfxjxmhxxs Ahysk • Functionality: Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required.

Year of construction: 2025, condition: as good as new (ex-display), These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Podpfxsfzblqj Ahyogk

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Pgjdeucw Rbjpfx Ahysk The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Table size: 750 x 300 mm Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Pgsdpfx Ahoyulfaoysk Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Pgsdpfjw Dm Hrjx Ahyjk

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT, Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Podpfx Aheh Ak D Uoyjgk The machine has a cleaning part, missing. Price Euro 2.895 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. /Wir sprechen Deutsch. /Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Aceti edge milling machine Art.61 A stable, robust edge milling machine, for milling visible and welded edges. Chamfer adjustment by handwheel and scale. Table hardened, with clamp 500 mm long. Axial adjustment of the milling table for full utilization of ISO / DIN inserts. Suitable for all materials, including plastic, by using different inserts. Standard accessories : Podpfx Aeiwxwtshyogk -Milling head completely equipped with 10 ISO inserts -Hardened axially adjustable guides -Bevel adjustment by handwheel with locking device -Angle adjustment by circular guide 15-45° - Table design with 4 rubber feet -Table design with 4 rubber feet technical data: Motor 400V 1,1 KW speed 2800 rpm milling table 500 x 100 mm milling cutter 80 mm chamfer 0 - 6 mm angle 15 - 45 weight 35 kg incl. 10 pcs. indexable inserts SPUN 1203