Used Nko Anfassystem B22 Zero for sale (887)

Condition: ready for operation (used), Rack shaping machine EZ-9V Processing length: 1200 mm Max. module: 12 mm Klodpjuw Tvfefx Alfjr Max. rack width: 200 mm Length of cut rack: 1100 mm Width of cut rack: 170 mm Cut module: 12 Weight: 10200 kg Rack shaping machine is intended for cutting of teeth of gear racks by using a method of work-piece running with a gear cutter. Rack shaping machine allows to make spur and helical gear racks of up to 1200 mm long and 12 mm maximum modul

Condition: ready for operation (used), Year of construction: 1987, VTL Stanko 1540 Chuck diameter 4000 mm Max Heigth of piece 2000 mm Max weigth of piece 50 to Kodpfx Ajqd Uvfelfjlr Main motor 63 kw Weigth of machine approx 100 to

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Kodpfxew Hy E Te Alfolr Debarker rotor opening: 620 mm. Service-friendly pull-out rotors for quick and safe maintenance. Ring changer for reducer ring.

Condition: used, Down table size: 1120x1250mm Technical characteristics: *UP DOWN STROKE 1000 mms *FORWARD BACKWARD STROKE 1200 mms *LEFT RIGHT STROKE 1000 mms Klodpfs Dv Nxox Alfsr

Condition: used, SURFACE GRIDER MACHINE Kedoikza Tepfx Alfolr STANKOIMPORT 700x250mm

Condition: good (used), Year of construction: 1973, functionality: fully functional, pressing force: 1,250 t, stroke length: 220 mm, table width: 260 mm, table length: 820 mm, throat depth: 700 mm, total length: 6,400 mm, total width: 4,365 mm, total height: 3,760 mm, overall weight: 135,000 kg, operating pressure: 7 bar, pressure: 7 bar, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Klsdpfjuby N Dsx Alfer Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Total weight, circa: 135 000 kg.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: PO201200633, conveyor belt width: 250 mm, roller width: 220 mm, product height (max.): 12 mm, product height (min.): 4 mm, TECHNICAL DETAILS Roller width: 220 mm Dough thickness: 4 mm - 12 mm Kedpfx Aloxvxz Ajfslr Adjustable dough band: yes Belt width: 250 mm MACHINE DETAILS Dimensions (L x W x H): 1,850 mm x 1,020 mm x 1,520 mm ELECTRICAL DATA Voltage: 380 V Phases: 3 Ph Frequency: 50 Hz Power: 2.25 kW EQUIPMENT Additional equipment for pasta & dumpling production Automatic functions for easy cleaning Precise roller adjustments

Condition: good (used), Year of construction: 1989, functionality: fully functional, total width: 14,600 mm, total length: 35,350 mm, total height: 18,700 mm, grinding length: 320 mm, grinding wheel diameter: 200 mm, Shaft and bore grinder. Prod. STANKO(USSR) - 1989. Diameter of the ground hole 50 - 300mm. Max. diameter of the workpiece 560mm. Distance between table and spindle 340mm. Klsdpfxjtzwzxo Alfer Maximum length of the workpiece 320mm. Upper diameter of the inner grinding head 125; 100; 80mm. Distance from the front face of the grinding head to the spindle flange 150 - 400mm. Size of grinding disc 200 x 75 x 63 mm. Workpiece spindle speed range 60 - 600 rpm. Table movement 800mm. Power of main motor 7,5 kW Total required power 14,63 kW Dimensions of the machine (Length x Width X Height) 3535 x 1460 x 1870 mm Weight of the machine 6400kg.

Condition: good (used), Year of construction: 1981, functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Klodet I Dppopfx Alfor Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: not inspected (used), I sell the saw blade and saw band sharpening machine Stankoimport TCPA-6, Made in Russia. Kledpfx Aljd Hx R Djfer

Condition: ready for operation (used), Working width: 1000 mm Kljdow Dq Dujpfx Alfsr Combination unit with pneumatic shoe Shoe set automatically Pneumatic belt tensioning Pneumatic oscillation Pneumatically activated shoe (lub: Shoe activated by air blast – w zależności od kontekstu) Electric table adjustment Two feed speeds Thickness gauge Abrasive paper: 1030x2100 mm

Condition: ready for operation (used), Working width: 1100 mm Two feed speeds 1 unit with rubber roller 2nd unit with segmented pad Total power: 15 kW Klsdpfxsw Dra De Alfer Pneumatic oscillation Adjustable pad pressure

Year of construction: 1990, condition: good (used), # 1299, drill automat with magazine, 3 piece drill motors with each 2 2 spindles and 25 mm grid, milling motor for floor groove and chain drive after general repairs and new electric and new pneumatic Klodecm Uf Aopfx Alfjr

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, For sale is the oven cooking pot shown in the pictures, VOK. Gas-fired, direct heating. Hydraulic bowl and mixer movement. The total capacity of the bowl is 190 liters, but it is suitable for cooking about 150 liters at a time. Suitable for cooking soups, stews, jams, sauces. Suitable for cooking rice and pasta, etc. In good condition. Made in Taiwan. Total dimensions: 1550 mm x 1400 mm x 2000 mm Kljdpfevyinxjx Alfer

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 275 h, The mobile loader RVM - 180E is a single-axle trailer with a receiving platform and unloading auger. Along the entire length of the lower section of the platform, there are 8 (eight) augers, each 3,000 mm long and Ø 130 mm, and one movable auger 2,100 mm long with a Ø of 300 mm, all covered at the top by special protective grates. In the center of the loader, there is a folding unloading auger with a diameter of 400 mm, operated by a hydraulic cylinder. Please omit the electrical section in the manual, as these devices do not have an electric motor; they require a tractor for operation. Ksdpfxsxqx Rms Alfelr

Year of construction: 2023, condition: used, Henkovac vacuum packers brand-new 2023 models available from stock. Advertised in the photo's Henkovac M4 Henkovac M6 Henkovac D1 Ksdpfx Aoku H I Sslfolr Henkovac D4 All models are equipped with upgraded vacuum pumps for more performance, sensor control, filling plates, soft-air. Contact us for more specific information and photo's.

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, Klodsvzhhyepfx Alfjr • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: new, Year of construction: 2022, functionality: fully functional, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,500 mm, turning diameter: 2,500 mm, faceplate diameter: 2,000 mm, total height: 7,260 mm, total width: 6,280 mm, total length: 4,500 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 1 rpm, torque: 40,400 Nm, spindle speed (min.): 1 rpm, warranty duration: 24 months, overall weight: 45,000 kg, faceplate torque: 40,400 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control Kjdpevtytxjfx Alfjlr - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 2000mm - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 diameter range: 1,8-2,5 mm nail length: 32-57 mm output - pieces/min: 2000 Location: Europe Ksdpfxswi Tl Ee Alfelr

Condition: not inspected (used), ANKO HEATED DOUBLE TORTILLA PRESS Kedpfxewu Tn De Alfelr

Condition: good (used), Year of construction: 2001, Lifting capacity: vertical 400/550 kg, horizontal 400/550 kg. Includes 4 additional suction cups for lateral extension, if required. External dimensions: Width: 2200 mm. Height: 1800 mm. Depth: 1150 mm. Kljdoxyqiyepfx Alfjr Weight: 224 kg. Condition: good, second-hand

Condition: new, functionality: fully functional, - New ball slewing ring Klodpfxswt Ry Ue Alfsr - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Ksdpfxswf Iqnj Alfslr Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Klodpfxewm Rtzo Alfjr Machinetype: thread rolling machine for nails Make: ENKOTEC Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany

Condition: excellent (used), Gas tank on pallet for oxygen, argon, nitrogen, carbon dioxide, CO2, LNG, LOX, LAR, LIN Volume 2 m3 working pressure 20 bar Kodpfx Aovyf Unolfelr vacuum isolation We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.